Question about Miele Dryers

Open Question

Miele professional T5206 dryer user manual needed. any help appreciated. thanks.

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

reverendrave
  • 24 Answers

SOURCE: Diagram of wiring on Miele dryer

Hello cpopp101,
Please follow the link and goto page 30 for the electrical requirements. The manual is for the T8012 but all the dryers are the same for electrical. Goto page 30. There is usually a seperate fuse box for these (Depending on how old the dryer is) in which you may want to contact Miele to see if you have

http://www.mieleusa.com/manuals_pdf/Residential/Dryers/T8012C_8013C_us.pdf

Good luck

Posted on Sep 17, 2009

Buffalo12980
  • 625 Answers

SOURCE: The drum is not spinning

the tensioning device [ spring] is weak or the belt is stretched beyond its usable length. if a new belt has been installed, the tech didn't put the belt on the correct side of the tensioning device. it is possible to install it wrong.

Posted on Jun 19, 2008

  • 1 Answer

SOURCE: I have a Miele T5206 dryer. It is heating up

I solved the same problem by pressing the three reset buttons on the side of the heater element housing.
Under the machine, remove plastic ducting for exhaust air. Undo the shiny bracket which holds the heater housing in place. Gently pull housing down and when you turn it around you will find (sometimes very covered in fluff) three red reset buttons. press, so they stay in. replace all parts.. Worked for me, with a fairly heavily used machine with alot of fluff build up inside the heater element(this was removed carefully)

Posted on Sep 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model pw6065. Why is 'technical fault' displayed?


Hi dear. Machine display that message because,there is a problem with machine's components - drive system etc.. Which is not rectified by user. (You can check the fluff filter but you can not test the motor or electronic board.)You need to get professional help from Miele for proper diagnose and solution for it. Thanks.

Jan 30, 2016 | Miele Washing Machines

1 Answer

My Miele Touchtronic T 9800 Dryer progrma works but when the dryer has ocmpleted its cycle, the cloths are still damp and not dry.. .I have to run the cycle several times to even get near dry cloths. what...


Hi dear.Try this,that should help you to solve the problem.If you need to download the user manual please click the link below.Thanks.
http://www.mieleusa.com/manuals_pdf/Residential/Dryers/T9802_us.pdf

Problem:The laundry is still wet. The program runs too long.
Solution:The air flow is insufficient. Check the lint filter, air intake and vent for obstructions(REFER USER MANUAL)

Aug 25, 2010 | Miele T9800 Electric Dryer

1 Answer

I have a Miele T5206 dryer. It is heating up properly and tumbling as well. The problem is that the air blower is not coming on. Maybe a fuse or a breaker, but where to start looking for that?


I solved the same problem by pressing the three reset buttons on the side of the heater element housing.
Under the machine, remove plastic ducting for exhaust air. Undo the shiny bracket which holds the heater housing in place. Gently pull housing down and when you turn it around you will find (sometimes very covered in fluff) three red reset buttons. press, so they stay in. replace all parts.. Worked for me, with a fairly heavily used machine with alot of fluff build up inside the heater element(this was removed carefully)

Aug 24, 2010 | Miele Dryers

1 Answer

Diagram of wiring on Miele dryer


Hello cpopp101,
Please follow the link and goto page 30 for the electrical requirements. The manual is for the T8012 but all the dryers are the same for electrical. Goto page 30. There is usually a seperate fuse box for these (Depending on how old the dryer is) in which you may want to contact Miele to see if you have

http://www.mieleusa.com/manuals_pdf/Residential/Dryers/T8012C_8013C_us.pdf

Good luck

Sep 17, 2009 | Miele Novotronic T1515A Electric Dryer

1 Answer

The drum is not spinning on a miele dryer, model T5206, the appliance is generating heat, the brushes are intact and also the belt on the centre of the drum is intact.


the tensioning device [ spring] is weak or the belt is stretched beyond its usable length. if a new belt has been installed, the tech didn't put the belt on the correct side of the tensioning device. it is possible to install it wrong.

Jun 19, 2008 | Miele Dryers

1 Answer

Miele T5206 drier repair manual


meile t5206 not heating up,everything else working ok. I have ensured all filters and vent pipes clear

May 16, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

681 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Dryers Experts

Tim Whalen

Level 3 Expert

3074 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Miele Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...