Question about Kenwood KDC-MP4032 CD Player

1 Answer

Display thank you for your help but now i have another problem the display is screen is black how do i get the screen illuminated again once again this is for the KDC-MP4032 CD Player

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 624 Answers

There is no easy fix for this problem, the radio must get looked at by a trained technician. The problem is an electrical one and there are a couple of things it could be.
You may have a regulator out on the main board of the radio, you may have a bad LCD display, may even be some broken solder joints on the display or on the main board. I have even seen some with a cracked display board being the cause.

If you know how to check voltages and have a multimeter let me know and I will tell you what components to check. You will also need a power supply to power the radio on your bench or table. You can not do this with the radio in the car.

let me know if you need more help.

Posted on Jun 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen goes black but sound is good.


This sounds like the inverter which powers the display fluorescent has or is failed/failing. If you take a torch to the blacked out display can you see the image faintly? If so the unit needs repairing.

Mar 12, 2015 | Televison & Video

1 Answer

Screen stopped working


Unplug the battery, wait a couple of minutes and plug it in back again. It should solve.

Nov 22, 2013 | Car Audio & Video

2 Answers

D630 screen is black once it starts up it illuminates but stays black


You must detect what parts is failure
Screen display, inverter board or lamp
Follow these step.
1.- Connect an external monitor (at VGA port) and check the image in external monitor
If show clear image. The failure may be the inverter board or the lamp backlight
Inverter boars is more easy to replace.
You can buy an used cheap price on
http://www.ebay.com/itm/Dell-Latitude-D630-Inverter-Board-K021048-00-/260809995144?pt=LH_DefaultDomain_0&hash=item3cb97cb388

Replace and your screen will work again

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

Sep 21, 2011 | Dell Latitude D630 PC Notebook

2 Answers

I have a hp2000 with a black display screen


your problem is a faulty ccfl BackLight Inverter, the display uses the backlight to illuminate the lcd screen, the inverter is used to illuminate the cold cathode light in the back of ther lcd theirs countless places to laern about it on google

Aug 20, 2009 | Dell Latitude D600 Notebook

2 Answers

Got an alpine cda 9855 the screen keeps goin black but if you touch the button it comes back on it has like a 5 sec delay then it goes black but still plays any help


Blackout Display Mode: When the Blackout mode is activated, the display turns off to reduce power consumption. The additional power made available by turning off the display helps enhance sound quality. If a button is pressed during the Blackout mode, the display will illuminate for 5 seconds before blacking out again. Blackout Mode On and Off (CDA-9855 only) When Blackout mode is turned on, the display will turn off to reduce power consumption. This additional power enhances the sound quality. Press and hold FUNC. for at least 2 seconds to activate the blackout mode. The display will turn off. If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. To cancel Blackout mode, press and hold FUNC. for at least 2 seconds.
Copied from the alpine user manual..
Hope this helps

Aug 01, 2009 | Alpine Car Audio & Video

1 Answer

The screen turns black


Hi there.
Its not the screen, its the display settings that has to be changed.
Go to the control panel and select power options, in power options look for select when to turn of the monitor and set it to never as its probably set to turn of after 20 minutes or so also set the hard drive to never turn off, save the changes and the problem should not arise again.
If you need anymore help or advice please post back.

Good luck and thanks for choosing FixYa!!

May 28, 2009 | Compaq Computers & Internet

1 Answer

My hp desktop will not operate. It reports a message that I have a paper Jam. I have checked the printer as advised and there is no paper inside. I have also conducted all recommended shut down and...


You need to clean NVRAM on Lexmark X5470 printer. Please follow the steps given below to clear NVRAM on Lexmark X5470 printer:

1. Turn the printer off.
2. Hold down "#5" button and turn the printer back on.
3. Keep holding "#5" button for about 5-10 seconds.
4. Press "Menu" button once.
5. Press the right arrow until display shows "Tools."
6. Press "Check" button once.
7. Press the "Right" arrow button again until display shows "Maintenance."
8. Press "Check" button again.
9. Press the "Right" arrow button again until display shows "Manufacturing."
10. Press "Check" button again.
11. Press "Right" arrow until display shows "Clean NVRAM."
12. Press "Check" button to clear nvram.

Next, try this printer self-test by following the steps given below:

1. Make sure the printer is in “Copy Mode.”
2. Press the “Menu” button once.
3. The screen will display “Copy Menu: Copies”.
4. Press the left arrow button once. The screen will display “Copy Menu: Tools”.
5. Press the check button once. The screen with read “Tools: Maintenance”.
6. Press the check button once. The screen with read “Maintenance: Ink Levels”.
7. Press the right arrow button until the screen reads “Maintenance: Print Test Page”.
8. Press the check button once. This will start the Self-Test. Once the page has printed, the printer will stop. The test is not continuous.

The self-test should at least print out a set of either a solid black or solid color bars, if not both (if you have a printer with both color and black installed simultaneously). Should this test fail, please try it again without cartridges installed. If the self-test still fails to take paper in and make sounds like the carrier is moving across the paper, this is a hardware issue, and the printer will require service. If the self-test completes without any cartridges installed, run the self-test again with only a color cartridge installed (If you have both black and color cartridges, after this test, run the test again with just the black cartridge installed). If you find that either cartridge causes the self-test to fail, please let us know.

If the self-test prints, but has lines or smudges or other print quality issues, please let us know. This includes any print quality issues - we need to know if the problems you have with your black or color are based in the printer, or communications with your computer, or the computer's software.

If the self-test prints your test bar(s) clearly, the printer hardware is not at fault.

May 02, 2009 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Powershot s410 My s410 is "old" :( but I love it and has been working amazingly over 10,000 photos in the 4 years I've had it. All of a sudden this week-end when I am in auto or manual mode the screen is...


Since it is taking a picture, and showing it up afterwards on the display, it definitely sounds like you activated the DISP or DISPLAY button. Seeing that you've used this camera for years, you should know that this manually turns the screen on and off to save batteries, and to turn it back on again, all you have to do is press this button once more. As you've undoubtedly already tried this, suggest trying the button again, maybe jiggling it (to overcome potential corrosion) to reactivate the screen.

Apr 21, 2009 | Canon PowerShot S410 / IXUS 430 Digital...

1 Answer

Mag lcd monitor


probably capacytor problem in the mainboard, take it to the lab it will be cheaper then buying new one

May 06, 2008 | Mag Innovision LT782S 17" Flat Panel LCD...

Not finding what you are looking for?
Kenwood KDC-MP4032 CD Player Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4807 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...