Question about Biostar MCP6PB M2+ Motherboard

1 Answer

When i cut my computer on nothing happens no beeps no loading or video. the only thing that seems to work is the fans. i havent done anything to it at all just cut it off for awhile then went back to it and this happend. ive tried to reset it with the jumpers and removing the battery and still nothing.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Check to make sure your Power supply hasn't taken a partial death.
You can take it to your local best buy - Computer store. Test it first!
A partial failure from your power supply will only power some of your system. (fans)
If the power supply tests pass. Then you might be looking at a board ISSUE!
Check all the Capacitors on the board and see if any of them HAVE popped.
PICTURE of a Blown cap!

These would be the first items to check on - the most common.

Good luck and Hopefully it's just the power supply. New Egg.com

Thank you for visiting FixYa.com

Posted on Nov 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Why dose my pc keep beeping andCan some one help me fix my pc to boot and video to work ?


Check out this site to determine what the beep code is saying.
http://www.computerhope.com/beep.htm
Remove and re-seat your RAM sticks. Try to get to BIOS and load default settings are just a few things to try.

Jun 10, 2014 | Systemax Ascent PC Desktop

1 Answer

The only thing works on my 600 series is fan-nothing to screen


You can try reseating the memory and video card. You just pull them out and put them back in. Disconnect the power cord before. Also, the machine should beep. Those beep codes have diagnostic meanings. Listen to the beep, and google it: like 2 short 1 long or 4 short.

If the machine doesn't beep, the motherboard is bad.

Apr 22, 2010 | Sony VAIO PCV-W600G PC Desktop

1 Answer

No POST/Black Screen


Believe it or not, clearing the CMOS might actually help. Make sure you do it right by completely unplug the power cord or turn off the PSU, then take the battery out.

It also sounds like the CPU might be too hot. Look under the fan of the heatsink and see if there is any dust that will block the airflow. When the computer is on, touch the heatsink and feel if it is really warm. If it is really warm, it's a good sign, you might just need more airflow. If it is cold, you might need to reinstall the heatsink/apply new thermal compounds.

Mar 07, 2010 | Gigabyte Computers & Internet

1 Answer

One long beep and two short beeps


I believe that is a Pheonix bios and the beep code you gave indicates motherboard problems.
http://www.computerhope.com/issues/ch000607.htm

Jun 02, 2009 | E-Machines M5312 Notebook

1 Answer

Dell XPS 700 Black Screen, No Bios, Post error 1 2 3.


could be the cpu, its prolly the only thing you havent tested. or the power supply.

Mar 11, 2009 | Dell Computers & Internet

2 Answers

Ps3 turn on (green) but nothing happens.


Hi

Try to reformat your ps3 or reset the unit

Thanks!

Mar 10, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Computer Does not Boot correctly, Monitor is Black.


Very interesting...Might try the following...
- Video. Yes, almost garuntee that it is either the video card/onboard or the cable. Look at the cable and cable connectors and see if one of the pins has been shoved in. This is common. Often, one will replace the cable and still have the problem because a pin has been shoved in on the mother board.
- Power. Remove everything from your computer except the keyboard and the monitor (yes, even the mouse) to eliminate any power drain issues. If you can, remove the DVD drive (unplug power and data bus cable).
- BIOS. One beep is good. You should be able to get into the BIOS setup no mater what other problems you are having. The BIOS uses a generic text, video and keyboard driver. If you aren't able to see ANYTHING after the beep then it is definately the route from the motherboard through the video card or onboard video, through the cable to the screen. You seem to be going through the right steps to debug but just haven't found it yet because it is something that you have dismissed as working...like the pins on the video connector. Go through your path again, this time look at anything that you have assumed that was working and suspect it as the issue.

Jan 08, 2009 | Computers & Internet

3 Answers

No beeping, no video displayed.


hi, The beep test is notrmally done with the small speaker attached to the computer internally, there could be a problem with the RAM installation check the RAM compatablity with the mother board, give me further details of the make and model of the mother board and RAM , i will try to help you.

Jun 30, 2007 | Abit LG-95Z Motherboard

Not finding what you are looking for?
Biostar MCP6PB M2+ Motherboard Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Biostar Computers & Internet Experts

Jayburt

Level 2 Expert

78 Answers

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Biostar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...