Question about Proform 380 CS Treadmill !
If the console takes batteries, replace them. If this does not work or your console does not require batteries, check the reed switch or optic sensor. Reed Switch: Unplug the treadmill and remove the motor hood cover. The reed switch is mounted on the frame next to the front roller pulley. There is a magnet glued into the front roller pulley. When adjusting the reed switch, make sure it is pointing directly at the magnet. Move the tip of the reed switch within 1/8" of the magnet. Also, check to see that the wire is not damaged, and is connected to the console.
Optic Sensor: Unplug the treadmill and remove the motor hood cover. The optic disk and sensor are located either at the end of the motor or the right hand side of the front roller. The optic disk spins between two sensors on the optic switch. The disk must spin freely without touching either sensor. The sensors can be moved by loosening the adjustment bolt holding the switch to its bracket. The switch can then be slid. Center the disk.
Posted on Nov 14, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 30, 2015 | Brother Sewing Machines
Mar 10, 2012 | Nokia 5310 Cellular Phone
Jul 15, 2010 | LG KM900 Arena Cell Phone
Jun 26, 2010 | 2008 Harley Davidson FLHX Street Glide
Feb 04, 2018 | Samsung SGH-A877 Impression Cell Phone
229 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: