Question about Zio Corporation Dazzle MovieStar 5 for PC

1 Answer

Dear Sirs, I have installed MovieStar 5 (with a CD) on my PC run by Vista. It seem that installation is completed. But when launching MovieStar 5 the program bug (while charging "wind weak"). I tried again with another version of MovieStar 5 Downloaded from the web.The same thing happened. Is it due to Vista? Is there specific updated modules? Thanks for your help Pascal B (France)

Posted by on

  • babinfrance Nov 14, 2010

    Dear Sirs,

    Tanks for this information. I watch the links you indicted to me. There are no update software. I understand that, because I am working with Vista, there is no solution. SO, THE SOFTWARE IS UNUSABLE FOR ME.

    I bough this software with a hardware (Dazzle* Hollywood USB 2.0), that was supposed to transform signal In (from my Sony Handy cam, camcorder : S-Video Cable and RCA Audio Cable) to a signal Out (PC, USB port). See description, link hereafter:

    Is there any software that is able to run that hardware with Vista? Or should I throw it also to the trash can?

    Yours sincerly



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 345 Answers

MovieStar 5 will work with xp but not vista and here is the link with compatibility pages,

I am not sure is there a newer version that might work with vista. Hope this helps.

Posted on Nov 14, 2010

  • Mihajlo Jerkovic Nov 14, 2010

    I did little more research and was not able to find driver for vista. This is also link that has all software downloads and still says only xp is highest OS it supports. I guess it is manufacturers site.

  • Mihajlo Jerkovic Nov 14, 2010

    I would not trow it out yet because there is always a chance they will get the vista driver out. they are just sometimes little late but even if windows 7 driver comes out you can always upgrade your operating system to win 7 and this will allow to use the software but just have to be patient. Good luck.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Installation of microsoft word 2007

  1. Insert your Microsoft Office CD into the CD/DVD-ROM drive and wait for the setup to launch automatically. If it does not launch, click "My Computer" (Windows XP) or "Computer" (Windows Vista or 7), right-click the CD/DVD-RM drive containing the Microsoft Office disc and click "Autoplay." If you purchased an installation file from Microsoft, download the installation file and run the setup.exe file.
  2. Type your 25-character Microsoft Office product key in the product key box and click "Continue." The product key is located on the CD jacket located in the back of the Microsoft Office CD 2007 case. If you purchased a Microsoft Office 2007 download from the Microsoft website, retrieve the product key from the confirmation email that Microsoft sent you when you purchased the download. Click "I accept" after reading the Microsoft Software License Terms and click "Continue."
  3. Click the "Customize" button and click "Installation options." Select "Microsoft Word 2007" and click "Install Now."
  4. When the installation process completes, click "Close." Follow the guided prompts to activate your product.

Jan 28, 2011 | Microsoft Office Professional 2007 Full...

1 Answer

I need to reinstall,

Start>Control Panel>Add or Remove programs>Remove When the removal process completes, It may be display/asked to restart the computer. There go ahead and restart/reboot at that time.
Now insert the Norton installation CD/DVD into your CD/DVD ROM Drive. The CD/DVD automatically run or launch the installation wizard. But if you downloaded Norton AntiVirus from the Symantec website,double click the installation file and run to begin the installation wizard.Click "Install Options" and click "Browse" if you want to change the default installation location. Click "OK" after making the selection. Make sure that you should complete the download by clicking "next" or follow the instruction to install until it's complete the reinstallation.
All the Best!

Sep 19, 2010 | Symantec Norton 360 for PC (037648318846)

3 Answers

How do i install roxio cd that came with my

below is 17 easy steps to installing roxio easy cd creator

1Close any open applications.

2It is recommended that you turn off your anti-virus protection, and script blocking before running the setup program.

3Place the CD in the tray

4The setup program should launch automatically. If it does not, go to Start, and then Run. In the Run line type D:\setup.exe and hit Enter.
The setup program will launch. You will see a dialog indicating that Roxio

5 has been detected, Select Yes to begin the installation.

6Next, choose the language for your installation. The default is English.

7Setup will copy some files and launch the Install Shield Wizard. To continue the installation, select the Next button. If you wish to stop the installation, choose Cancel.

8Choose the type of installation. The default is Complete. This will install all components of the application. This is the recommended installation.

9The next screen will allow you to go back to change any of the settings for the installation. Select the Install button to install the program.

10Setup will copy files to the hard drive and make entries in the registry for the application.

11Click Finish when prompted.

12 in order to complete the installation you will have to restart your computer and log into Windows as the Administrator.

13The first time that you open the Roxio software, you will see the End User License Agreement. You must agree in order to continue.

14Once you have selected to agree to the License Agreement, you will be presented with an opportunity to register your software with Roxio.

15Registration is recommended, but not required.

16If you choose to Register at this time, select the option to Register now then follow the on-screen prompts.

17Roxio EZCD Creator installation is complete. Please see the Help file for in-depth use information.

{please rate me}

Jan 03, 2010 | Computers & Internet

1 Answer

Vista installation problem.

Make sure that your CD/DVD drive is set as the first boot device in BIOS, then insert the Vista setup cd and reboot. Installation should now be automatic.

Oct 06, 2009 | HP TouchSmart IQ770 PC Desktop

1 Answer

Unable to install in Vista Operating Software

use updated version of moviestar.If not work then use it in compactibility mode... HOW TO USE compactibility in vista? sol : right click on exe file and go in property then click on compactibility.

Jul 29, 2009 | Zio Corporation Dazzle MovieStar 5 for PC

1 Answer

Zio software

Install the software then right click the installed icon and select properties and then go to compatibility mode and select xp.

May 23, 2009 | Zio Corporation Dazzle MovieStar 5 for PC

1 Answer

Dazzle Movie Star 5 Vista Problem

It doesn't fully work in Vista. You have to set it to run in Windows XP compatibility mode. Right click your desktop icon; select properties; select the compatibility tab.

Dec 13, 2008 | Zio Corporation Dazzle MovieStar 5 for PC

1 Answer

New p c game will not launch

If you installed from CD - Have you tried it with the CD in? Many games do not install completely to the hard drive and require the CD to run. If you downloaded it from another source, try installing it again.

Dec 13, 2008 | Intel Motherboard

2 Answers

Samsung R20 won't read the installation CD


To go into safe mode -- Press F8 key as soon as the PC restarts.

(You will have do again if pc starts in normal mode)

You would see a black screen as soon as you hit F8.

On the black screen >> select the option that says

Safe mode with Networking

Step: 2

Click on start>> Run>> msconfig>> Click on Launch System Restore

Select a previous working day and reboot

Let us know your PC is reboot or not?

For More Information about SYSTEM RESTORE, Just go through this:
1) Click on "START" then "RUN"
startrun.jpg 2) Type "MSCONFIG" and click on "OK"
startrunmsconfig.jpg 3) Now Click on "LAUNCH SYSTEM RESTORE"
msconfigstartup.jpg 4) Leave Defaults and Click "NEXT"
systemrestore1.jpg 5) Select a date to restore from, (Warning all software installed after date will be completely removed) and click on "NEXT"
systemrestore2.jpg 6) You will be asked to confirm date, if you are happy then click on "NEXT"

systemrestore3.jpg 7) Your computer will now reboot, do a bit of work and when finished the below screen will be seen, your problem should now be solved, if not try another date prior to this.
8) Done. You can undo system restore by simply launching it again and selecting "UNDO RESTORE"


Sep 12, 2008 | Computers & Internet

Not finding what you are looking for?

Open Questions:

See all Zio Corporation Dazzle MovieStar 5 for PC Questions

Zio Corporation Dazzle MovieStar 5 for PC Logo

Related Topics:

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zio Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Zio Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides