Question about Hitachi Televison & Video

1 Answer

Model 51g5oo Worked well for 3yrs. used very seldom.Now it has no sound or picture seems to be locked in the video mode no one seems to be able to put it back into tv mode. We are on satellite signal and would appreciate your help.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 476 Answers

Hello, On your Hitachi TV there might be an input select or input control board problem, but first make sure that you do have a live TV, I mean when you say that is stuck in the video mode, does the screen display "video". If it does then try to hook up your Satellite converter box to the TV through the audio and video input that shows up in the screen(ex: video 1 or video front ) The connectors are colored and all the satellite boxes have this type signal outputs. If you are able to get your video and audio through, then there is a problem in the front end of the TV and more than likely the TV will have to be serviced by a qualified tech.

Posted on Nov 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In the start up mode as not connected can any body help


What happened since then. Have you solved it somehow? I have the same problem..

Apr 02, 2012 | Humminbird NS25 GPS Receiver

2 Answers

Canon FS200 won't fully initialize 32 GB SDHC card


I heard about that quite a lot of time,in deed. But, I personally haven't load 16 or 32 GB memory card in Canon FS200. At the very begining, I was thinking of using 16 GB SDHC card instead of built in 8 GB memory. The shop assistance don't advice me to buy more than that 8GB because he also know that problem. So then, I am still using with 8GB untill now.

Jul 05, 2009 | Canon FS100 Flash Media Camcorder

1 Answer

Macro mode and date imprint


In Macro mode, you have to hold the shutter release down halfway and hold it until the focusing system has time to work, then take picture.

Date/Time stamp on image only works in Postcard mode.

Jan 20, 2009 | Canon PowerShot A95 Digital Camera

1 Answer

Can't take pictures or video


this sounds like it doesn't make sense, and I don't know why it started working ok, but all I did was switch the position on the memory card to ''locked'', put it in the camcorder and of course it told me the card was locked. So I reinstalled it after ''unlocking'' it, and now it seems to work ok. Can't explain why this worked and still don't know what a "Directory Index" is...

Dec 22, 2008 | Nikai DV8500 Camcorder

1 Answer

Colored lines and rectangles


Sounds like a problem on the digital board. try hard booting (unplug for 2 minutes) to reboot the microprocessor. if no resolution, look for a new board part # bp94-01859f if your model # ends in WX

Nov 30, 2008 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Polaroid ttm-2401


To me, sounds like a picture tube issue. horizontal / vertical controls don't fix it. then its dead.

Jun 22, 2008 | Polaroid TTM-2401 TV

1 Answer

No picture but sound on panasonic plasma


Unplug the TV and disconnect any HDMI cables to the set. If the issue goes away there is a possibility that your HDMI source is causing the problem. Anything on the HDMI can cause odd problems with the TV since the serial data and serail clock lines are routed on HDMI. Those are the 2 commmunication lines used throught the TV for operation so anything HDMI that might load down one of those can cause issues.

Mar 07, 2008 | Televison & Video

1 Answer

RCA Camcorder


It's been a while since I worked on the RCA full size camcorders as well. It sounds as though the load motor is "jogging" because the mode switch is not in time with the mechanism. I think there are timing marks on all the cams and gears in the unit and an indicator arrow on the mode switch. Set the mechanism to the "stop" mode and align the main cam index mark to the load motor drive cam, be sure the mode switch arrow points to the load motor drive gear "hole", this tells the micro the unit is in "stop" mode. Good Luck Joe Weibel customelectronics.org

Feb 07, 2007 | RCA CC4252 Camcorder

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74245 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...