Question about Projection Televisions

1 Answer

I have an RCA ColourTrak Plus 27" and the signal will not get through to the TV part the Video works good but you can't watch TV

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I phoned RCA very simple.

Thanks Peter

Posted on Jun 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 52" RCA


Make sure you are connected to correct cable IF connector,Go to Menu and see if you are on Cable or Air.Then Do AutoProgramming.

Feb 17, 2011 | RCA HD61W140 61 in. Rear Projection...

1 Answer

I have a Toshiba 57H81 57 in. Rear Projection Television. The picture started having "squiggles" in it, which at first went away after the T.V. "warmed up". Now they appear to be...


Ur tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts must be replace on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Jan 22, 2011 | Toshiba 57H81 57" Rear Projection...

2 Answers

I have an RCA M50WH72syx12, 50" DLP.


Yeah could be expensive if it isn't the lamp.
Mind you could be a little easier, might just be a fuse on the video relay. If you are confident in being able to open it up, check the relay that runs from the video input to the power capacitors and there should be a small fuse along that circuit.
If the fuse has a broken capsule then you may just be in luck. Failing finding a broken fuse, then I would agree with you on the bulb. But check the blub for any markings or cracks because they usually only make noise when the vacuum fails.
Hope this helps and good luck mate! :D

Nov 23, 2010 | RCA HDLP50W151 50" Rear Projection HDTV

1 Answer

Our TV is stuck on a guide plus screen


i actually dont know what that is...mindboggling, right? call your tv company.

Jun 29, 2009 | RCA R52WH73 Projection Television

1 Answer

No audio...only static


This is caused by a corrupted signal being sent out by one of the stations you are watching. There is definitely NO PERMANENT SOLUTION to this problem. Just keep unplugging the TV.

May 13, 2009 | RCA P60921 60" Rear Projection Television

1 Answer

Hd channels not showing


Your tv has a input named COMPONENT to make work this input you need three RCA conectors (RED GREEN BLUE) plus two audio RCA Conectors red and white. If you have another set that can be plug in in this input and that set (dvd recorder, in ex.) has a digital tuner then you got it, But the Magic about the decoder box is that only cost 40.00 +- dllrs and send the signal to your antenna connector or RCA analog conector. Good luck!

Mar 27, 2009 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Guide plus on my rca p52937 tv


You are right, the Guide Plus is transmitted to your tv over the air. If you have a cable company supplying your programs, your Guide Plus will not receive a signal to set up. You will need to get a two-way splitter. It has two connections on one side and one on the other. The side that has one connection goes to your tv. The side that has two connections will connect to your cable supplier and the other to a rabbit ear or outside antenna. Then the tv has to be off over night to restore your Guide Plus.

prs1c-2266633t98.jpg 2-Way Gold-Plated Bidirectional Splitter pixel.gif Model: 15-2587 | Catalog #: 15-2587 pixel.gif
Use this 2-way gold-plated bidirectional splitter to divide a signal to feed two devices, such as TV...

Jan 30, 2009 | RCA P46924 46" Rear Projection Television

1 Answer

Get closed captions on some channels, but not all, even though it is CC


RCA have choices for different methods of CC in user CC menu. Labelled T1, T2, etc. . Different selections are for different types of close caption. Tune to a signal (on your other TV) that has closed caption working.

Tune your RCA to the same signal. Change the T1,T2, etc settings until the closed caption for your signal appears.

If this doesn't work, try connecting analog video or VHF channel 3 (or other specified channel) to the TV. check CC. When TV stations, sat channels, sat receivers, cable boxes etc, convert analog video signals to HD, problems can result. Some equipment causes RCA TVs to do unexpected things with sound and closed caption.

If you use RF or video output, old analog video may look better on CH3 or video than on HD input and the CC will work more consistently. Watch HD signals on HD input, Analog signals on Video in or through the TV tuner . Many HD channels and programs are converted analog video and look poor on TV HD inputs.


easyab

Nov 03, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

I am helping a friend to connect a 60 inch Hitachi Projection screen, model no. 60u85b it says on the back, to a Sony str485 amp that can run 6 devices - to get the sound from cable TV to come out the...


The coax should go from the wall to the cable box to the TV, just like you have it. Then you should run audio only (L and R RCA) from the cable box (if it has it) to the amp. Don't worry about running a video signal to the amp.

Sep 06, 2008 | Projection Televisions

1 Answer

Hitachi ultravision 50v500


there should be 3 sets of video rca jacks on tv or receiver they might have put them on the wrong rca jack in which they just need to be moved over
usually the 3rd set of rca jacks are component jacks not for tv or video but for low output signals say like cameras and only one set of rca's can be used at a time svg on one of them rca's will over power the vid's. so have no picture

Apr 14, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...