Need assist. connecting my wireless-g usb adaptor to my mac

Hi there
According to this webpage which gives the specs for the Asus, it does not have wireless capability built in
http://www.cnet.com/uk/products/asus-essentio-cm5571-br003/specs/
It can easily be used with a wireless network connection either by adding a wireless network PCI adaptor, or a USB wireless network adaptor. Neither of these are expensive and the USB adaptor is often preferred as it only needs a spare USB port on the machine and the computer does not need to be opened up as it does for the PCI adaptor.
Hope this helps

This a wireless adaptor, not a router.

You need to use the correct driver software for the Apple Mac.

from Here

WG111v2

What type of error do you have. ?

Hi there. Changing the mac address of any device is not possible. mac addresses are hardwired to the device. Sorry. Alex

you might be knowing about it... but check--


Yes you an can but the purpose of the Wireless Usb adapter is to get the wireless connection from the Router to the PC (Computer)

Connect the Wireless USB Adapter to the usb socket of the computer and install the Drivers with the Help of the CD.

Note to get the wireless connection you need the wireless router connect as well in home network

You need to get a wireless adaptor your laptop did not come with wireless built in. You can get a USB adaptor or a PCMCIA adaptor. Either will work but the pcmcia adaptor will be a little faster

Have a look here

http://www.google.com/products?hl=en&q=pcmcia+wireless+card&um=1&ie=UTF-8&sa=X&oi=product_result_group&resnum=1&ct=title

Hope that helps

The belkin USB adaptor does not appear to have a channel selection option. Like most WiFi adaptors it scans and connects to the available networks assuming the security matches.

What you need to do is change the BROADCAST channel in your router or access point. If you are unsure how to do this I suggest you post the make/model and I'll try to assist you.

Ensure you use 1-11 as this adaptor does not support ch 12 or 13 wheras some routers do.

You may find the NETSTUMBLER prorgam useful in finding a free channel to use.

The USB turntable is likely a USB data connection and not a USB audio connection, so you will need to take the audio output from your Mac G4 to your Sony Mini Hi Fi...

You will likely need a stereo mini-plug (3.5mm or 1/8-inch) to stereo RCA plug cable (red and white RCA plugs). This is often referred to as a "stereo Y-cable."

Hi zlyman, The Belkin N1 Wireless USB 2.0 Network Adapter might be choosy with what motherboard it is attached to. Pls refer to this similar problem > http://www.fixya.com/support/t201253-not_identify_belkin_n1_wireless_usb Hope this be of some help/idea. Post back how things stand or should you need further information. Good luck and kind regards.

what the adviser meant was your pc cannot provide enough power to the usb port to power the unit, assuming you have tried other ports and it still wont work; you will need to either purchase a pci usb 2.0 card adapter or purchase a mains powered usb hub and connect to this instead.