Question about RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Hi, I have cleaned my nailer, does all the right noises as if its about to fire, but two out of three it doesn't, gas good, batts good, not an old gun, thanks for any ideas ian

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 885 Answers

I am in New Mexico and we have a terrible time making these run reliably, altitude affects these guns in a big way. On their gas tubes there are three types of metering valves; red, yellow and blue, sometimes the tubes match but it's the valve on top that matters. I don't know what the exact elevation requirements are for each but we are at 4000' elevation and the red valves are useless here, we need the yellow valves. Some of our neighboring cities are at 8000' and above and they can't get their guns to work with anything but the blue tips. The only place I was able to get the blue tips was from a Paslode sales rep so you may have to contact them if you need a blue valve.

Posted on Nov 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The framing nailer first started not firing all the time and when it did - the nail didn't go all the way in. Now - even though we installed a new cell and fully charged battery - i does nothing. ...


ive found that sometimes where the batt is inserted into the gun theres two contacts down there wit a rubber pads the contacts rest against. check and see with a flash lite if one of the rubber pads has pulled away and wraped itself around the contact, if so pull it out with needle nose pliers or what ever works.if not the problem make sure your batt is good some will read 6 volts but will have no or week current. worst case repAIR SHOP.

Jul 05, 2011 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Hi .my im350 nail gun isnt working gas and battery ok and gun is cleaned.light on green .but when depresssed makes strange noise and lights on fire from fan end?


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



././

Oct 24, 2010 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

My paslode impulse framing nailer fires intermitantly. New batt & fuel cell.


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



-][][

Oct 23, 2010 | Palmgren 91232 Full Head Framing Nailer

1 Answer

Im 250 nailer wont fire new gas , all good battery charged cant seem to see spark what next


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



-]0]0-

Oct 21, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

I have a paslode gas framing gun when i want to nail something it makes all the sound but does not fire gas cell is good battery is good


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



';';[]\

Sep 14, 2010 | Porter Cable FR350A Factory Reconditioned...

1 Answer

My paslode straight brad nailer wont fire.. if you push the gas into the reciever and blow a burst into it and close the hatch it will fire.. but next shot, gas and battery fine.. no shot. fan going.. all...


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



0-0-

Apr 30, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

2 Answers

IM250 not firing.


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



'l;l;

Apr 12, 2010 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

My finish nail guns, 16 ga won't fire.


There is a little plastic piece inside above the trigger...usually this breaks. It touches a microswitch when the cylinder is closed all the way, allowing the nail to fire.

Oct 04, 2009 | RTO PasLode 900420 Impulse Framing Nailer

4 Answers

Paslode 350 wont fire


Hi,
Probably needs cleaning. You`ll need two new o`rings.

Aug 19, 2009 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Intermitent firing


Hi .I had the same problem with my gun,have you tried taking the fan housing off and cleaning the sparking point then oil and reassemble this seemed to wok on mine

May 03, 2009 | Hitachi NR90GC 3 1/2" Gas Powered Clipped...

Not finding what you are looking for?
RTO PasLode 900420 Impulse Framing Nailer  Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1383 Answers

Brad Brown

Level 3 Expert

15557 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a RTO Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...