Question about Sony FD Trinitron WEGA KV-32FS120 32" TV
I have Trinitron KV32FS12 and the picture starts to blink on and off but the sound stays on. I have been told to go to Menu and reset the factory settings. However, I can't see the screen long enough to even see the menu or make a selection. All the Sony people say is take it to a dealer. Before I trash it do you have any suggestions?
Using remote reset the factory settings
Posted on Oct 26, 2010
I think your problem is a weak picture tube.
Remove the back cover. on right rear is a transformer with a wire that is plugged into the picture tube. on the rear of the transformer is a black serrated !/4 inch control. with the set on, turn the control counter clockwise to the end. turn carefully.
get someone to watch the pix. tube then turn the control very slowley to the right. you pix should come on. if you find the set flashing on and off.then it is too late. and the set will have to be replaced as the cost of the tube is too high.
Posted on Jun 26, 2008
Unplugging the TV for 4 hours will also reset it back to factory settings.
Posted on Jun 20, 2008
Tips for a great answer:
Jan 09, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV
Jun 22, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV
Jun 18, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV
Mar 01, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV
210 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: