Question about Linksys Wireless-G WRT54G Router

1 Answer

Linksys box fell to the floor. The power and LAN lights are on, but the computer is not connecting.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

No need to worry abt that...i think the router is back to the factory default setting....just follow these steps,ur issue will b resolved


U dint specify that whether u r using the cable Internet or DSL!!

Steps for Cable internet...

1,connect the blue cable between the computer and the router(any 1 of the 4 ports in the

router)

2,connect the other Ethernet cable between the Modem(came from ur internet people) and the

Router's Internet port(standalone port at the back of the router)

3,In the rear panel of the router u can see the reset button.with the help of the paper or

ball point pen,press it hardly and hold it for 1 minute..

4,Now turn off ur modem and the router..wait for other 1 minute..

5,turn onn only the modem first and wait till all the lights lit.now turn on the router and wait

till the power light is solid..open the internet Explorer it should work..

STeps for DSL Connection

1,connect the blue cable between the computer and the router(any 1 of the 4 ports in the router)

2,connect the other Ethernet cable between the Modem(came from ur internet people) and the

Router's Internet port(standalone port at the back of the router)

3,In the rear panel of the router u can see the reset button.with the help of the paper or

ball point pen,press it hardly and hold it for 1 minute..

4,Now turn off ur modem and the router..wait for other 1 minute..

5,turn onn only the modem and wait till all the lights lit.now turn on the router and wait

till the power light is solid..

6,open internet Explorer and in the address bar..enter as 192.168.1.1..it will prompt for a

user name and password..leave the user name blank and the password will be admin.

7,linksys set up page will open..there u can see local ip address which says 192.168.1.1.
please change it as 192.168.2.1..click on save settings at the bottom of the page..
it will say like "settings are successful please release and renew the ip address".click

continue or OK

8,Now turn off ur modem and the router..wait for other 1 minute..turn onn only the modem and

wait till all the lights lit.now turn on the router and wait till the power light is solid.

9, Open Internet Explorer and it shuld Work....


STEPS FOR WIRELESS CONFIGURATION

1,open internet Explorer and in the address bar..enter as 192.168.1.1..it will prompt for a

user name and password..leave the user name blank and the password will be admin.

2,
U can see the option WIRELESS in the black bar..click on wireless..
Wireless network mode should be "Mixed".wireless network name can be ur first name or

anyother name.select the channel as 11 and the SSid broad cast should be Enabled.click on

save settings.it will say like "Settings are successful"click continue.

3,to set the password for ur wireless network...below wireless tab in the black bar..u will

find a blue bar which says "wireless security".click on "wireless security". Security mode

should be "WEP"..Default transmit key should be 1.wep encryption should be 64

bits..passphrase should be empty..in the key 1 box enter ur 10 digit telephone number(ur

telephone number will be ur password for the wireless connection)click save settings and

continue..

4,
now in the laptop check whether the wireless switch is turned on...u can find ur wireless

signal..while connecting it will prompt for a password.enter ur telephone number there..
u will be connected to the internet..



ALL THE BEST!!!!!!!!try it and post ur feedback

Posted on Jun 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Linksys wrt160n all lights on


To connect to your wireless router, the router's wirelesssettings needs to be configured with the SSID, encryption etc. and also thewireless cards in all the laptops/computers needs to be configured with theserouter's wireless settings. Then the laptops/desktop computers can communicatewith your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down andput it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Jul 03, 2012 | Routers

1 Answer

MY LINKSYS WRT150N ROUTER WAS CONNECTED TO THE MODEM VIA CABLE.IT WAS WORKING NICELY FOR WIRELESSLY CONNECTING TO LAPTOP AND IPOD AND ANOTHER LAPTOP/DESKTOP WITH A ASUS USB ADAPTER.THE...


Try turning off the power wait for 30 secs and reconnect the power and check if the LEDs light up again.
IF NOT THEN -
To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of therouter with the power ON for 20 secs. then release the RESET button.
To connect to your wireless router, the router's wireless settings needs to beconfigured with the SSID, encryption etc. and also the wireless cards in allthe laptops/computers needs to be configured with these router's wirelesssettings. Then the laptops/desktop computers can communicate with your wirelessrouter.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down andput it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Sep 06, 2011 | Linksys Wireless-N WRT150N Router

1 Answer

Lights flashing but wireless not working


Try reseting the Linksys back to the default settings -Press and hold the pinhole RESET button at theback of the router with the power ON for 20 secs. then release the RESETbutton.
To connect to your wireless router, the router's wireless settings needs to beconfigured with the SSID, encryption etc. and also the wireless cards in allthe laptops/computers needs to be configured with these router's wirelesssettings. Then the laptops/desktop computers can communicate with your wirelessrouter.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default PW (write it down and putit in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

Feb 20, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

Would like to set a password for my linksys router?


Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http:192.168.1.1
The default login = admin
The default PW = admin

If you cannot login with the default password, then it was changed but you can reset the Linksys back to the default settings by pressing and holding the RESET button at the back of the router for 30 secs. with the power on.

Dec 24, 2010 | Linksys WRT54G2 Wireless Router

2 Answers

I have a WRT54G router and want to daisy chain a Linksys BEFSR41 switch off it, but I seem to be doing it wrong...


Not sure if you just want to expand the amont of computer you can connect to it or the wireless range but I would setup the BEFSR41:
  • Disable DHCP
  • Set an address out of the DHCP scope of the WRT54G
  • Connect them LAN to LAN if not use xover to connect them

Aug 27, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I have a cisco linksys wrt54g2 v1 that I have hooked up to my verizon dsl modem. My computer says I am connected but it wont let me get on the internet. If I plug the ethernet cable from the modem to my...


Connect the cable from the LAN port on the DSL modem to any of the 4- LAN ports on the Linksys Swicth (not the port Labelled Internet), then from any of the remaining 4 ports then connect your computer. Also try using a cross-over cable to modem from the DSL LAN port to the Linksys.

Oct 24, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Slow or no connectivity with linksys modem


- Changing the LAN IP Address of your Linksys will do to fix the issue.

Mar 16, 2009 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

2 Answers

Vista keeps losing internet connection


open device manager and  look at network adapters and right click on your device and go to properties and uncheck the power management box that allows pc to put device to sleep. this should resovle your problems since windows id defaulted to put device asleep when idle to save power. hope this helps.

Mar 14, 2009 | Linksys WCG200 Wireless Cable Modem 54G...

1 Answer

Setup linksys wrt54g2 broadband router with prolink h9200 modem


You probably will need to make some configuration changes in the Linksys router, or in your computer, or both. Your are correct that you connect the Linksys WAN connection to the LAN connection of the modem. If your connection type is PPPOE, you will need to set that up in the Linksys with the username and password provided by your ISP, so the modem will allow you to login and connect to the internet. If that is how you were connecting to the modem with your computer, you will need to configure a new LAN connection in the computer in order to connect to the Linksys. You can then configure the Linksys through your web browser to connect to the modem.


If you find my suggestions to be helpful, please share with us some details so that others may benefit from knowing the whole story. Thank you!

Dec 27, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys Wireless-G BroadBand Router


Who is your ISP (Internet Service Provider)?

If you're using a Cable provider, do the ff. steps. (For Linksys router)

1. Launch Internet Explorer and type http://192.168.1.1
2. It will prompt you for username and password. Leave it blank on username and type admin for the password.
3. Under SETUP tab, click the sub-tab MAC Address Clone. The click the button Clone My PC's MAC. Then click on Save Settings.
4. Unplug the power to the modem and the router for 30 secs. After that, power on the modem first, wait for all lights to go solid then power on the router. Check if the internet works.

Hope this helps.

Jul 19, 2008 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...