Question about Wolf Manufacturing Electrical Supplies

2 Answers

Dear Sirs, I have a Wolf Portable Generator 950, which is around 3 years old, but only used once when new and run for around 10 minutes. on starting it up a few days ago, it ran well, but after a few minutes stopped producing power. I considered to whether the brushes could be sticking, but have no repair manual. I have tried twice to email Wolf directly, but have had no reply. Can you help! Regards, Mel Trigg

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 153 Answers

We are happy to assist you.

You can get advice, manuals and parts here on our site. Parts Spares for Generators and Small Engine Machinery

Posted on Jan 03, 2017

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 25 Answers

Ghkgk

Posted on Nov 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pull start


In all honesty, if it came loose once it will again. There are videos on YouTube showing how, but it is a real pig of a job to do, and the damaged to the spring or housing that made it fail could do it again (inspect).

Alternatively, you can replace it with a new complete Recoil. Parts Spares for Generators and Small Engine Machinery

Dec 26, 2016 | Electrical Supplies

1 Answer

Why does my portable generator not deliver any power?


check fuses and circuit breakers --test the out put wires from the generator if power test components ,wire and wire connections ---if no power internal problem with anything from broken shorted wiring to open winding

Aug 13, 2016 | Electrical Supplies

1 Answer

Sigma 6500E generator


First verify that the breaker for the outlets is not tripped and make sure that the generator is running at full operating speed. let it run for 5-10 minutes and check for output power. If there is nothing, there are two possible problems. One could be that the automatic voltage regulator is bad. The other is that the field needs to be flashed - a high possibility if the generator has not been run in a long time. There are many videos on the internet that show you how to solve both of these problems. Just do a search for No output from a portable power generator.

Mar 20, 2014 | Sigma Powers Inc Rural King 6,500 Watt...

1 Answer

EM 3500 Will start, then stalls after 30 minutes, starts again and continues to staff after 5 to 10 minutes. Oil is fine.


With regrets, I do not have any personal experience with generator troubleshooting. However, I have been informed by some people that have good experience with them that a generator needs to be run for a couple of hours every month to keep the system in proper order. Should a generator sit idle for ten months, the fuel can actually "shellac" inside the carburetor and lines. This will then travel to areas that will gum up - thus the necessity to drain the tank and carburetor completely.
Here is their advice:
http://powerequipment.honda.ca/parts-service/storage-tips
Your service person(s) may not be aware of the time the unit sits idle, and if they are aware - then they are not giving you straight facts (in my opinion). I would suggest contacting Honda customer service directly, and explain this situation to them - they will probably be more then happy to have a technician assist you properly. Contact the 'customer relations' number, and they will direct you from there. Here is the link:
http://honda.ca/contact_us

I am sorry I couldn't be of more help.

Dec 11, 2011 | Honda 3000 Watt Portable Generator

1 Answer

Hi we have a wolf 950 generator that wont start,cleaned plug,is there anything else i can try,HELP!


are you getting spark. pull out your plug and with the wire connected. hold the plug about an 1/8 of an inch away from any metal on the motor and ensure your getting spark. also check to ensure your fuel is not bad..

Aug 14, 2011 | Wolf Manufacturing Electrical Supplies

2 Answers

Coleman Powermate 10 HP Generator shuts down after a few minutes.


I have an HM100 on a 5500 watt gen with the same problem. This motor calls for a J17 spark plug, but I found using a J19 (hotter) plug solved the problem. I think the J17 doesn't get hot enough for a complete combustion burn so it act like fuel starvation thus resulting in the black sooty and wet plug.

Sep 24, 2009 | Coleman Powermate Premium Plus 6250W...

1 Answer

No spark at plug


I have a coleman pm 2200 about 12 yrs. old. No spark

Aug 13, 2009 | Wolf Manufacturing Electrical Supplies

2 Answers

I have a 3 year old Coleman Powermate 6250


Try this! To excite it. Shut off the generator! Unplug everything,Then use the 12 volt battery to excite it per manual. Make sure the engine is NOT running and the breaker switch is in the on position. Now with the battery 12V removed restart the generator! This should fix it if the problem is that it lost its magnetism.

Jun 08, 2009 | Coleman Powermate Premium Plus 6250W...

1 Answer

I have a Generac MC 5500 portable generator. It


when power tools get old they draw more amperage. 6.8 amps new might be 8 amps. over loading when older.

Apr 16, 2009 | Hammering

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

1,066 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wolf Manufacturing Electrical Supplies Experts

richie46

Level 3 Expert

12962 Answers

tosin_christ

Level 2 Expert

225 Answers

 Generator Guru...
Generator Guru...

Level 2 Expert

153 Answers

Are you a Wolf Manufacturing Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...