Question about Polycom ViewStation ISDN (pcy220011323001) Video Conference

1 Answer

Connecting a polycom

Hi,

I would like to connect a polycom but only have access to a 3G data card for internet connectivity. Will this work? Do I need to assign an IP address? etc. I have a polycom v500.

Regards
Deepuck

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

No, i don't think si. The polycom needs an ethernet connection to a router. You might get this working by putting the 3g card into a PC and enabling connection sharing, however even if you got it work itsd a bad solution in terms of:
- Cost
- Reliability
- Security.
ADSL would be better.

Posted on Jan 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm trying to connect a polycom vsx 700 to this conference room. Same unit is able to connect to local scopia xt5000 with no trouble. If dialing 135.11.119.48 it times out without connecting to an


hello
This is not a dialing but trying to connect to the IP address setup in the system. Start editing the IP address giving the one that you would have already allocated to the device in the Router (i.e. 192.168.1.99) and then reboot it. It should connect then automatically.
Best regards

Dec 16, 2014 | Polycom VSX 7000 Video Conference

1 Answer

What is the station type to use when hooking this polycom sound station premier EX to an Avaya S8300 on a digital port card?


The Polycon Sound Station Premier coference phone is an analog device. You need to connect it to an analog port on your phone system.

Dec 13, 2010 | Polycom >>> SOUNDSTATION PREMIER EX /AVAYA...

1 Answer

I have polycom 7000 with release version of 9.0.1 and second party having Polycom unit of 700 with release version now i am facing the poor video quality while connecting. Bandwidth at another end where...


Verify the uplink / download bandwidthon the broadband link.Broadband link do not have symmetrical upstream/downstream speeds. Perform test to verify.
Try non-peak hrs.
Check if latency is consistent.

Oct 14, 2010 | Polycom VSX 7000 Video Conference

3 Answers

Polycom 7000 series System Settings


Web into the unit by it's IP address and go to "Home Screen Settings" and check "system".

Mar 18, 2009 | Polycom VSX 7000 Video Conference

1 Answer

Can You View what the Camera sees through a Computer?


i will connect with microsoft netmeeting just dial in your polycom ip adderss to it and it will connect if you have given private ip address to polycom then connect with private ip if given with public then with public ip adress .

Jul 31, 2008 | Polycom VSX 7000 Video Conference

1 Answer

Not able to getting video from Remote far end.


Is the Indian site within the firewall? If so, I would focus on the firewall. Does the US site have a firewall? They may be blocking outbound traffic. If you are connecting but no video, it sounds like UDP traffic is still being blocked somewhere. If you can, you may want to assign public IPs on the units and test outside of the firewall.

Hope this helps..

May 06, 2008 | Polycom VSX 7000 Video Conference

5 Answers

Conference call with a Polycom SoundStation EX


The conferencing capability to bridge 2 (or more) external stations comes from the telephone equipment/service that you have purchased. Either you are behind a PABX or Electronic KSU, which provides multiple phone service to your office, or you purchase conferencing capability from your local telephone provider (Verizon, AT&T, etc). In either case, the way to initiate a conference call would be the same as when you would have a desktop/office phone and establish a conference/bridged call to external parties. Usually this occurs by having one party on the line, flashing the disconnect button momentarily, getting a new dial tone, dialing and connecting to a second party, then flashing the disconnect button again, which signals the equipment to bridge those two calls to your station.  On the SoundStation EX there is a Flash button that provides that capability of momentarily flashing the disconnect button.  Try and see if that works. If not, then you will need to make arrangements to purchase the external equipment or service from your provider.  If you have the PABX or electronic KSU, it may also be a configuration option that you will need to have your support person for your telephone system, activate for that station connected to the SoundStation EX. Hope that helps. 

Oct 22, 2007 | Polycom >>> SOUNDSTATION PREMIER EX /AVAYA...

2 Answers

LCD Display keeps flashing "INITIALIZING"


It needs to be plugged into a properly configured Avaya Definity digital port / wall jack. (NOT a regular telephone line as this can damage the polycom!!!) Does another Avaya digital phone work in that jack? If it does then call polycom for a RMA and eturn the phone under warrenty. If another Avaya digital phone does also does not work you need to check the PBX configuration or there is a wiring error at the jack or the PBX.

Jul 10, 2007 | Polycom SOUNDSTATION2 AVAYA 2490...

Not finding what you are looking for?
Polycom ViewStation ISDN (pcy220011323001) Video Conference Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polycom Conference Phones Experts

Danny Nagdev

Level 2 Expert

47 Answers

pbxinc

Level 2 Expert

61 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you a Polycom Conference Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...