Question about Samsung Office Equipment & Supplies
E1 is just operator error, it normally occurs when the wrong keys are
pressed or the machine has got itself into a bit of a loop. At exactly
which point does the message appear? is it when you press a certain key?
The first thing to try is an initial clear:
Turn the key to P
Press and hold SUBTOTAL
Whilst continuing to hold SUBTOTAL turn the power off... then back on
Continue to hold SUBTOTAL until the receipt stops printing
Turn the key to R and give it a test.
Posted on Nov 13, 2010
IF E1 Error displayed and beep continuously and nothing can be done, open and replace the PCB board's battery.
Posted on May 25, 2016
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 01, 2016 | Washing Machines
May 28, 2014 | Samsung Computers & Internet
Oct 15, 2013 | Computers & Internet
E1: Water Supply Error
-Display Shows 'E1'
-Water Supply Error occurs when water level frequency does not show changes more than 100Hz or water is not supplied up to the water level presetting for 20 minutes or more at the time of initial water supply.
-To help fix this problem please check the Hot and Cold water intakes, there is a filter screen in each input valve, remove and clean these filters. ** Make sure you replace the filters, they are very important for the operation of the Washing Machine.**
-The error status can be cleared by turning POWER S/W OFF and resuming the POWER ON initial status.
Nov 01, 2012 | Washing Machines
Jul 18, 2011 | Computers & Internet
Jul 30, 2009 | Office Equipment & Supplies
1,765 people viewed this question
Usually answered in minutes!