Question about Audio & Video Receivers

2 Answers

Need to learn 2-way radio codes like 10-20 10-4

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

I dont have the code ,maybe the code of robotek its okey already..

Posted on Jun 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi rgsusmcret79

Here is a full list of the codes, however, not all of them are used popularly. The list at the end are the more common ones.

  • 10-1- Receiving Poorly
  • 10-2- Receiving Well
  • 10-3- Stop Transmitting
  • 10-4- Ok, Message Received
  • 10-5- Relay Message
  • 10-6- Busy, Stand By
  • 10-7- Out of Service, Leaving Air
  • 10-8- In Service, subject to call
  • 10-9- Repeat Message
  • 10-10- Transmission Completed, Standing By
  • 10-11- Talking too Rapidly
  • 10-12- Visitors Present
  • 10-13- Advise weather/road conditions
  • 10-16- Make Pickup at...
  • 10-17- Urgent Business
  • 10-18- Anything for us?
  • 10-19- Nothing for you, return to base
  • 10-20- My Location is ......... or What's your Location?
  • 10-21- Call by Telephone
  • 10-22- Report in Person too ......
  • 10-23- Stand by
  • 10-24- Completed last assignment
  • 10-25- Can you Contact .......
  • 10-26- Disregard Last Information/Cancel Last Message/Ignore
  • 10-27- I am moving to Channel ......
  • 10-28- Identify your station
  • 10-29- Time is up for contact
  • 10-30- Does not conform to FCC Rules
  • 10-32- I will give you a radio check
  • 10-33- Emergency Traffic at this station
  • 10-34- Trouble at this station, help needed
  • 10-35- Confidential Information
  • 10-36- Correct Time is .........
  • 10-38- Ambulance needed at .........
  • 10-39- Your message delivered
  • 10-41- Please tune to channel ........
  • 10-42- Traffic Accident at ..........
  • 10-43- Traffic tieup at .........
  • 10-44- I have a message for you (or .........)
  • 10-45- All units within range please report
  • 10-50- Break Channel
  • 10-62- Unable to copy, use phone
  • 10-62sl- unable to copy on AM, use Sideband - Lower (not an official code)
  • 10-62su- unable to copy on AM, use Sideband - Upper (not an official code)
  • 10-65- Awaiting your next message/assignment
  • 10-67- All units comply
  • 10-70- Fire at .......
  • 10-73- Speed Trap at ............
  • 10-75 -You are causing interference
  • 10-77 -Negative Contact
  • 10-84 -My telephone number is .........
  • 10-85 -My address is ...........
  • 10-91 -Talk closer to the Mike
  • 10-92 -Your transmitter is out of adjustment
  • 10-93 -Check my frequency on this channel
  • 10-94 -Please give me a long count
  • 10-95 -Transmit dead carrier for 5 sec.
  • 10-99 -Mission completed, all units secure
  • 10-100 - Need to go to Bathroom
  • 10-200 - Police needed at ..........
. The common ones that are wellworth knowing are
10-1
10-4
10-7
10-8
10-9
10-10
10-20
10-100
Receiving Poorly
Received
Out of Service, Leaving Air (you're going off the air)
In Service, subject to call (you're back on the air)
Please repeat
Transmission Completed, Standing By (you'll be listening)
Location, 'What's your 10-20?'
Toilet, 'I'm going 10-100'
I am more than happy to answer any other questions you may have about it, just give me a hoy :) If you are still unsure, or have problems, then before you give a rating for this advice, please get back to me and we can try some more things.
Thanks for using FixYa, If you consider the advice I have given you as sound, a FixYa rating is a great reward for my efforts to help you. Cheers.

regards
robotek

Posted on Jun 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Nad T760 receiver/amp (not sure what the difference is). The remote cannot function. Is there a universal remote that I can buy? As this is quite an old piece of kit not sure if there is a


some remotes can be programmed by entering a manufacturers code using the numeric keys. i use a Sony RM-VLZ620 remote. it lists NAD as a supported receiver.
P.S. - a receiver is an amplifier with a built in radio tuner.

Nov 15, 2014 | NAD T760

2 Answers

I need the Anti-theft code for my 2003 volvo c 70. The radio went blank after having to get a jump.


well the code is in the car manual front or back page if you dont have the manual you will have to cakk volvo and they will provide you with the code and the u enter the code usally 4 to 5 digits

Sep 09, 2008 | Audio & Video Receivers

1 Answer

I bought a stereo from a friend who is selling their car and the pass code is missing and i am trying to find the pass code for a kenwood kbc mp7028.


KENWOOD SECURITY CODE CLEAR procedure


Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

Mar 20, 2008 | Audio & Video Receivers

1 Answer

How can I get my onkyo remote control (RC-693M) to control my Sony LCD tv?


Manual says: 1. While holding down the REMOTE MODE button for the mode in which you want to use the command, press the [ON] button. *** Hold both buttons down for 3-4 seconds *** 2. Press the button you want to learn the new command 3. Point the remote controllers at each other, about 2-6 inches apart, and then press and hold the button whose command you want to learn until the Remote indicator flashes. *** Hold them level with each other, 2-3 inches apart, and don't move them at ALL while you press the button on the old remote *** 4. To learn more commands, repeat steps 2 and 3. Press any REMOTE MODE button when you've finished. *** If the command was learned correctly, the remote indicator will flash *SLOWLY* twice - about a 1 second blink, and the red light will remain on. If the command was NOT learned correctly, it will blink twice *QUICKLY* - about .5 seconds, and the red light will go off. *** If the red light stays on, you're golden - keep going until you get to a button that flashes red quick and the light goes off. Some of the buttons I programmed took 6-7 tries in exactly the same position to learn.

Oct 09, 2012 | Onkyo TX-SR705 Receiver

1 Answer

Radio screen showen ( code )


The anti-theft feature was engaged. This is usually caused by the battery being disconnected. Do one of the following:
1. Check your owners manual for the User Card showing the code.
2. Call Hyundai National Consumer Affairs at (714) 965-3006.
When you call, you may need the VIN number or the radio chassis identification number (That might be the radio's serial number). They will tell you how to retrieve the information needed.

If the wrong lock-out code is entered, the Anti-Theft system will activate and the radio will become inoperable. To correct this, press and hold the "BAND" button for at least 3 seconds until the incorrect number on the radio disappears and "CODE" is displayed again.

Let me know if this helps!

Apr 20, 2009 | Audio & Video Receivers

3 Answers

1998 bmw 328 I radio code


I found the code for the radio in the book some one wroted down the # is 51534 if some one need it

Sep 19, 2008 | Harman Kardon AVR 130 Receiver

1 Answer

I need the 4 diget security code to unlock a kenwood kdc-w6027?


Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Aug 21, 2008 | Kenwood Audio & Video Receivers

1 Answer

Need to get radio to show unlock code,has not been changed since put in car,can you help,thanks


Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Jul 31, 2008 | Audio & Video Receivers

1 Answer

1995 V.W PASSAT


Hi,

If I understand your post right, you have the code but need the procedure on how to input/enter it into the radio. To my understanding, a 1995 Volkswagen Passat would have a non-BOSE unit with or without CD changer controls. It was a premium sound system with anti-theft coding.

Pls try:
1. Power the radio ON till "SAFE" is displayed;
2. Press the AM/FM and SCAN buttons simultaneously till display shows "1000". (In some versions, it is the seek and the two scan buttons);
3. Release the AM/FM and SCAN buttons;
4. Enter your security code using the first four station buttons on the radio;
5. The first button changes the first number of the four digit code;
6. The second button changes the second number and so on and so forth;
7. Once the proper code has been entered press the AM/FM and SCAN buttons at the same time and hold until the radio accepts the code;
8. You have two tries before the system will lock you out for an hour;
9. Should you happen to have a three digit code, pls make the first digit a zero;
10. The first digit can only be 1 or 0 (the 0 will not show up so for a zero, push the button until the 1 disappears).

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Mar 08, 2008 | Audio & Video Receivers

2 Answers

Security code for a kenwood kdc-319


This is the workshop procedure for resetting the code.

KENWOOD SECURITY CODE CLEAR procedure


Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!
Please rate me FixYa for this solution. Good Luck :)

Feb 17, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68427 Answers

yadayada
yadayada

Level 3 Expert

61292 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...