Question about Juki MO-735 Mechanical Sewing Machine
Go back to the seller. If it was listed as new and does not work, the seller should either repair, replace, or refund. Note--you may need to get eBay involved in case the seller refuses to address the issue. EBay will refund your money and reverse the charge to the seller.
Posted on Jul 17, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: attaching the cover stitch plate
The extension plate must be easily removed,
therefore has to be easily attached.
Usually they are slided in from left to right.
If you can upload a picture of the extension table, may be I can help you more.
Posted on Jun 13, 2008
Open the font of the serger and the instructions will be printed on the serger or on the door.
Raise the presser foot and set the tensions to zero when threading.
Turn the hand wheel so the upper looper (curved one) is at it's highest point and thread it first, and then the lower looper.
With some sergers you must thread in a certain sequence. This should be indicated in the instructions on the serger.
Set the tensions back to normal ( 4 - 6), lower the presser foot and run a length of stitching to see if the threads are knitted together as they should before you start serging your project.
Posted on Feb 19, 2010
This video starts off a little ****, but expected if you have ever visited the Threadbanger site - http://www.metacafe.com/watch/1462325/how_to_use_a_serger_indie_pendent_designer_spotlight_thread_he/ Not your brand, but the same "serger basics". Lift the antenna to it's highest position. Set the tensions to zero. Have the presser foot up when threading. Raise the upper looper to it's highest position. Sergers are great little machines, but they can be nerve racking when it comes to threading. After years of threatening my old FunLock, I bought a Babylock Imagine with air-jet threading - what a relief!
Posted on Mar 12, 2010
Testimonial: "Thank you very much. i like the website that you suggested!!"
Tips for a great answer:
Oct 25, 2012 | Juki MO-644D Mechanical Sewing Machine
Mar 03, 2012 | Sewing Machines
Jun 13, 2011 | Juki MO-735 Mechanical Sewing Machine
Jul 12, 2010 | Juki MO-644D Mechanical Sewing Machine
Mar 12, 2010 | Juki MO-735 Mechanical Sewing Machine
Mar 03, 2010 | Juki MO-735 Mechanical Sewing Machine
Oct 08, 2009 | Juki MO-644D Mechanical Sewing Machine
Jan 11, 2009 | Juki MO-735 Mechanical Sewing Machine
320 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: