Stereo Code required for Mazda 323 Protege SP 2002

1993 mazda protege Try this website, they can help you. Go to live chat and consult

2002 Mazda Tribute Workshop Repair Service Manual PDF Download


get your car fix right now

i dont know what codes you managed to trip but those are not proper diagnostic codes. OBDII codes will start with a letter and have four numbers (P0304, for example). these codes can be retrieved with a code reader or a scan tool.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Firstly remove the stereo system and see if that fixes the problem as if it started after you installed it then you have interfered with the power systems for the ECM. Best have the stereo system fitted professionally if that is the case.

Hi, there is a factory wire (red with a black stripe) in your car for illuminating the stock radio. This wire is not to be used in an aftermarket radio, so you need to make sure it isn't connected and also isolate and bare wire with electrical tape. Please let me know if you have questions, and thanks for using FixYa.

1999 Mazda Protege Car Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Blue/Red
Car Radio Accessory Switched 12v+ Wire: Blue/Black
Car Radio Ground Wire: Black/Yellow
Car Radio Illumination Wire: Red/Black
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 6 1/2? Speakers
Car Audio Front Speakers Location: Doors
Left Front Speaker Positive Wire (+): Violet
Left Front Speaker Negative Wire (-): Blue/Orange
Right Front Speaker Positive Wire (+): Yellow/Blue
Right Front Speaker Negative Wire (-): Violet/White
Car Audio Rear Speakers Size: 6? x 9? Speakers
Car Audio Rear Speakers Location: Rear Deck
Left Rear Speaker Positive Wire (+): Yellow
Left Rear Speaker Negative Wire (-): Orange
Right Rear Speaker Positive Wire (+): Green/Orange
Right Rear Speaker Negative Wire (-): Green/Black

The code entry instructions depend on the make + model of your radio

Select yours from this free list of instructions

CLICK HERE

Main Dealer or Decoding Service only for this code...Sorry !

First you must cut the Dimmer wire from your stereo installation.Second, replace the 5amp or maybe the 7amp fuse that blew at the fuse panel near the LEFT foot rest.If you are certain that all the fuses check fine, then go to your MAZDA dealer and purchase a new thumbwheel dimmer control,because the rheostat has burned in your present one.Do not reconnect the dimmer control wire 2 your stereo wiring,because U don't need to.

it may be the security code

check in ur manual for the car to see if the radio is there if not go to ford with ur reg no and chassis no and they should be able to give u the radio code