Question about Linksys SRW2008MP 8-Port Gigabit Ethernet Switch

1 Answer

We have lost the password for Linksys srw2008mp switch and would like to reset it to factory defaults we cannot get into it to reset it.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 124 Answers

Hi,

To reset to factory Default settings you need to do the below steps

1. Look for the reset button. The reset button is a tiny black button on the back of the switch.
2. Power Off the switch.
3. Press the reset button (preferably with help of a ball point pen or a small head scew driver) keep the tiny black button pressed and do not release that.
4. Power On the switch and the sys LED will blink slowly and then rapidly. 5. Now release the black button
6. Wait for 5 minutes. The switch will boot up with factory default settings.

Best Regards

Posted on Nov 15, 2010

  • ecloss Nov 29, 2010

    As far as I can see there is no reset button on the back of this switch. Anyone know the real answer to this question?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i delete a bt broadband account,??


Here is how to reset your Linksys wireless router to the factory default settings in order to clear any existing properties.

  • Note: All your settings will be lost including WEP encryption information, MAC Address filtering information, and any SSID information you have entered. The router user name and password will revert to the default of admin as the user name and no password.

To reset your Linksys BEFW11S4 router to the factory default settings:

  1. Hold the reset button on the back panel of the Linksys router for 30 seconds. All your settings will be lost including WEP encryption information, MAC Address filtering information, and any SSID information you have entered. The router password will revert to the default of Admin and all user name information will be removed.

flioqsktle4l2on3s2rwrurpaery4ednch7fnrcft2qykek7dl9puwp12tebm2epxiv1cic0cgjbtccmwjiymzmxbli0zgzkwq5ytgrmzmeowlrkzmtdjf24rlu2laabtaaaaaelftksuqmcc

  1. When you access the router utility to change the router settings from the default values, be sure to leave the User name field blank and enter admin in the Password field.

Aug 18, 2014 | Linksys Wireless-G Broadband Router

1 Answer

I ofrget my router password


MOST, if not all, cisco routers have a small recessed button to reset the router to Factory defaults. If you've lost your password, you can hold that button for 30 seconds to reset ALL router settings to factory default. MOST Cisco/Linksys routers use admin/admin for the factory default id/password.

Jul 07, 2014 | Computers & Internet

2 Answers

Forgot guest pw on cisco e2500


If a password was set by user, no one else will know it if you forget it.
If the password needs to be reset to factory, so you can log in with the "default" password AND RE-SETUP EVERYTHING, then you'll need to reset the Linksys E2500 to factory defaults. You can usually do that via a special button or sequence of actions.
The E2500 manual will have specific directions for performing a factory default reset. You can download the manual for the E2500 from http://support.linksys.com/en-us/support/routers/E2500

Aug 08, 2013 | Linksys By Cisco E2500 DualBand WirelessN...

1 Answer

Lost password


Perform a Linksys reset:

Aug 13, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

I have lost the username/password pair for the Linksys ProConnect II PC22604. How can I reset to factory defaults. If someone has the .rom configuration file that this unit will export (and the UN/PW...


Hi this works on a netgear router you could try this on you Linsky or the hair pin

Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

or

if there is a small hole in the front or back of the router push a hair pin in to reset to factory settings


hope this helps

Feb 11, 2011 | Linksys ProConnect II 2604 (PC22604)...

2 Answers

I need to figure out how to re-set my Linksys WRT54GX2 Wireless0G Broadband Router With SRX200


This article will guide you how to change the router's password and reset it to factory default.
NOTE: Accessing the router's web-based setup page requires a password. The default password of a Linksys router is "admin". For security purposes, it is recommended to change default password.
Changing the Router's Password
Resetting the Linksys Router to Factory Default
Resetting the Router Using the Web-Based Setup Page.


If any more problem encounter,post or thumbs back.




















Nov 02, 2010 | Linksys WRT54GX2 Wireless-G Broadband...

1 Answer

Lost my password and cannot connect new netbook


hi
  • If you have forgotten your LinkSys router password, the easiest thing to do is to reset your router to the factory default settings.

    To restore the router configuration to factory defaults, hold the reset button on the unit for 30 seconds.
  • Step 2reset-password-linksys-router-1.2-120x120.jpg jQuery(document).ready(function(){ jQuery('#jsArticleStep2 span.image a:first').attr('href','http://i.ehow.com/images/a02/2p/6m/reset-password-linksys-router-1.2-800X800.jpg'); }); Once your router is hard reset, you will need to login and reconfigure it again.

    To reconfigure your LinkSys, connect a PC to one of it's Ethernet ports, load a web browser, and go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router.
    LinkSys Default Password

    On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."

    Once you are past the login screen, you are able to reconfigure the LinkSys router.
    You want to go to the management tab and change the administrator password to something else to keep others from accessing your router.
  • Step 3 After changing the administrator password then you will need to enable WEP or WAP security so your nosy neighbors aren't tapping into your wireless network. I am picking up 4 networks with my pc antenna.
  • Jul 21, 2010 | Gateway Belkin 54g Wireless DSL/Cable...

    4 Answers

    I lost the username and password for Linksys WRT54G2 Wireless Router ,,how can i get them back?


    Just reset your router and use (admin) for user name and password. To reset your router you can see a small hole in your router which is labeled reset. Use a pin and insert it to the hole and push.

    Jun 09, 2010 | Linksys WRT54G2 Wireless Router

    1 Answer

    Need help... is there a way to reset the switch login password?


    You can reset it to factory defaults in which case it will have the factory default login.

    Reset — Press and hold the Reset Button for less than ten seconds to
    reboot the switch. Press and hold the Reset Button for more than ten
    seconds to reset the switch’s settings to the factory defaults.

    Mar 14, 2010 | Linksys Cisco SLM224G Managed Ethernet...

    2 Answers

    Reset linksys wcg200


    If you purchased it from comcast, the default username is comcast, default password is 1234. If not, please post back details of where it came from and I should be able to assist you with the default password.

    Dec 21, 2008 | Linksys Wireless-G Broadband Router

    Not finding what you are looking for?
    Linksys SRW2008MP 8-Port Gigabit Ethernet Switch Logo

    1,318 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Linksys Computers & Internet Experts

    Prashant M
    Prashant M

    Level 3 Expert

    2260 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Michael Galve
    Michael Galve

    Level 3 Expert

    1269 Answers

    Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...