Question about Mitsubishi Televison & Video

1 Answer

How do you get the model number? I just see "Mitsubishi" on the front. Where's the data plate?? I can't get the TV to stay on. The green power click will click on for about a second then clicks itself off. The color is sometimes distorted too. The ad for this website says I can download a manual, but I don't see where.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,476 Answers

Twmorton3,

The data plate, which contains the model number, chassis number and serial number is located on the rear of the television. Usually you need some kind of magnification to be able to read the small print. It may or may not also include a manufacture date and possibly a version. All this information is useful when making repairs and ordering parts. As far as I know, and I am only an expert, there are no manuals on this site but plenty of links to sites which have them. I get many manuals (service manuals) from http://www.encompass.com . They do not always have every model but you did not mention your model number. If you had I could have checked for you. Another resource is http://www.retrevo.com . Again they do not have all manuals but they are free. If you are serious about repairing your unit go to http://www.servicemanuals.net . Their manuals are not free, but they have them all. Typically a download of the service manual is only about $16.00 US. Cheap for all the information you get.

From your description of the problem I would say that you have a high voltage problem. If you are serious about trying to fix the unit I have a tip at http://www.fixya.com/support/r6396176-projection_tv_troubleshooting which will walk you through the process of troubleshooting the unit. It should help you find the problem.

Thanks for using FixYa and for the great rating. Great ratings keep experts helping solve everyone's problem. Thank you.

hardrocko

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv wont turn on


To begin with the model listed here does not have a lamp, it has three picture tubes so we have the wrong model number--willing to try to help but need correct model number.

Dec 12, 2012 | Mitsubishi WS-55613 55" Rear Projection...

1 Answer

I have a Mitsubushi Model WS-65511 Projection TV . Green light is flashing on the front, screen won't come on. tried resting , no change. What could be the problem?


ONLY 1 of 2 things can cause this problem----

First thing to do is remove front speaker grill--it should pull out and issecured with plastic pegs--behind it you will find an inspection plate---

Notice the one or two pairs of wires coming from the front keyboard of theset---remove the inspection plate and follow the wires to the right--you canunplug both plugs(most have two and they are marked with letters and differents so you cannot get them wrong)

The idea here is to remove the front keyboard with its reset button etc fromthe circuit---You will still be able to try to turn the set on with theremote---

These sets have a Receiver that is called a DM board--(large metal box to theleft as you look from the back) and if the power goes out the green light willblink for about 70 seconds and then go out---it is the Receiver booting up. Itis called the DM board.

If disconnecting the keyboard allows the set to turn on--you have a bad resetswitch and two choices---either operate the set only with the remote or toremove the front screen and get at the reset switch (it is tiny) and removeand/or replace it.

If disconnecting the keyboard does not restore the set to operation---thereceiver is bad---there are 4 or more caps and some pico fuses that can fail inthat unit---Mitsubishi no longer sells or repairs these--if it is bad and notthe caps there is a company you can send the unit to and have it repaired--ifyou need to know their name let me know---

You can call them and get a quote for repairing the receiver.


Let me know what more information you need--I am here to help.


SD TECH

Apr 15, 2012 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi projection tv timer light is flashing


If the model begins with VS or WS or WT:

ONLY 1 of 2 things can cause this problem----

First thing to do is remove front speaker grill--it should pull out and issecured with plastic pegs--behind it you will find an inspection plate---

Notice the one or two pairs of wires coming from the front keyboard of theset---remove the inspection plate and follow the wires to the right--you canunplug both plugs(most have two and they are marked with letters and differents so you cannot get them wrong)

The idea here is to remove the front keyboard with its reset button etc fromthe circuit---You will still be able to try to turn the set on with theremote---

These sets have a Receiver that is called a DM board--(large metal box to theleft as you look from the back) and if the power goes out the green light willblink for about 70 seconds and then go out---it is the Receiver booting up. Itis called the DM board.

If disconnecting the keyboard allows the set to turn on--you have a bad resetswitch and two choices---either operate the set only with the remote or toremove the front screen and get at the reset switch (it is tiny) and removeand/or replace it.

If disconnecting the keyboard does not restore the set to operation---thereceiver is bad---there are 4 or more caps and some pico fuses that can fail inthat unit---Mitsubishi no longer sells or repairs these--if it is bad and notthe caps there is a company you can send the unit to and have it repaired--ifyou need to know their name let me know---

You can call them and get a quote for repairing the receiver.


Let me know what more information you need--I am here to help.


SD TECH

Apr 11, 2012 | Mitsubishi WD Televison & Video

1 Answer

"i have a mitsubishi HDTV


The green blinking light is telling you the error code. count the number of blinks and make note of any sequence. Then google your make and model with blink codes added to the end. This will lead you to sights that will tell you what the error or blink code means.

Aug 20, 2011 | Mitsubishi Televison & Video

3 Answers

Vin number location on a mitsubishi rosa deluxe


drivers side windsheild itll be in the bottom corner stamped on the dashbord

Apr 05, 2009 | Mitsubishi Minivan Cars & Trucks

1 Answer

I have a Mitsubishi 65" rear projection TV that has only a fast


having the model number would help.
green light flashing is telling you that it is in shutdown mode.
with model number we could reserch it futher.
thanks,
daniel.

Jan 12, 2009 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74245 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...