Question about Philips 60PP9202 60" Rear Projection HDTV-Ready Television

2 Answers

I have a Philips 60pp9202 60 hdtv i need to replace the stk 392 120 chips.I found the chips but i don't know how to take them out.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,476 Answers

Musiciromero,

I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which will walk you through the process and also links to the best place to get parts and equipment to do the job.

Thanks for using FixYa and for the great rating. Great ratings will keep experts solving everyone's problems. Thank you.

hardrocko

Posted on Nov 12, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,909 Answers

Buy a reel of Desolder Braid, that will allow you to remove multiple solder pins by desoldering each one in turn. A solder ****** will work but modern pcboards tend to have very thin copper and will be destroyed very easily.
Hope this helps.

Posted on Nov 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen colors jumble after one or two minunits of warm up. Can the bulbs be adjusted or does some other service need to be done?? Thanks, Bill Ormerod


Most likely one of the two STK-392-120 convergence chips is going bad, both will need to be replaced (seen this in several of these sets) and if you have some skill it can be a do it yourself repair.

If you are handy and can solder (the chips each have 18 pins) the parts on EBAY will be under 20 dollars.

Let me know if you have questions.

SD TECH

Apr 14, 2011 | Philips 55PW9363 55" Rear Projection...

1 Answer

I have a Philips 60" with a convergence problem.


info20999,

You need to use the exact chips that are in your unit. Any other ones would cause bigger problems and not work. The number is on the IC and from what you have said you must have already identified them. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which explains in detail how to change the units. You will need very good soldering skills and equipment. Also an attention to detail couldn't hurt. It can be done but be concientious and methodical. Leave nothing to chance and your repair should turn out great.

Thanks for using FixYa and for the great rating. Great ratings will keep experts helping everyone solve their problems. Thank you.

hardrocko

Nov 13, 2010 | Philips 60PP9202 60" Rear Projection...

2 Answers

I need to replace the divergence chips on my 60PP9202 projection TV. What are the stock numbers for the chips? Are the STK392-110?


With the back off look from the back to the far left side: two metal heat sinks side by side with fins---chips are bolted to them and will have either STK-392-120 OR -110 ON THEM. There are a few versions where it is one large heat sink on far right side as view from back.

Best place to get the chips: On EBAY select advanced search, then search by seller: sewsales55 is the one I buy from---a pair of the chips will cost less than 14 dollars.


Let me know if you have questions, I am here to help.

If this told you something you did not know rate this solution as very helpful as I do this here for free.

SD TECH

Aug 21, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

Toshiba 65hdx82 convergence issues


check fuse resistors near STK, and broken PCB around digital convergence board (board in a metal box verticaly mount beside STK.

Apr 23, 2010 | Toshiba 65HDX82 65" Rear Projection...

1 Answer

We have a philips projection tv 60PP920217F we can not alighn the blue color the picture is concaved on bottom and top


This is a convergence problem and can be repaired by replacing the two STK-392-120 convergence chips and adjusting the set with the original remote control

I have specific instructions for this repair from start to finish.

SD TECH

Feb 16, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

Is there any ic to relpace or change stk 392120


There is another but I do not recommend doing it. You are better to stay with the Original STK-392-120 CHIPS, the real reason they fail is the heat sink grease to transfer heat dries out---

A pair of the chips on Ebay is about 12 dollars.

If you need information about how to replace them let me know.

If this helped you rate this solution as I do this here for FREE.

SD TECH

Dec 01, 2009 | Philips 60PP9202 60" Rear Projection...

1 Answer

Convergence problem with Philips 60PP9352




You have a convergence problem. Here are some of the most common symptoms. 

Screen looks 3D
One or more colors can't be adjusted when when using the convergence menu. 
Screen is bowed in but stationary.

Solution: 
You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kit for your exact model. The kit inlcludes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc. Everything you need to fix it yourself. Its an easy fix. 

Oct 01, 2008 | Philips 60PP9352 60" Rear Projection...

2 Answers

Toshiba 42H83 projection TV red convergence issue


the Convergence Ics are STK392-110 ICs you can get replacement Ics at the following link and they provide free instalation instructions.
http://servicemanuals.vstore.ca/

Jul 03, 2008 | Toshiba 42H83 42" Rear Projection...

1 Answer

Convergence


http://home.comcast.net/~dande76530/ConvergenceOutSchematiics.pdf
http://www.servicemanuals.net/results.aspx?type=SM&brand=15&model=AV-48WP74

Dec 17, 2007 | JVC AV-48WP74 48" Rear Projection...

3 Answers

Pioneer 610HD Rear Projection


Check all solder joints on the deflection board.

Dec 10, 2007 | Pioneer SD-582HD5 58" Rear Projection...

Not finding what you are looking for?
Philips 60PP9202 60" Rear Projection HDTV-Ready Television Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...