Question about Sharp PC UM10 (PC-UM10M) PC Notebook
If you have lost windows password, the best thing for you is creating a password reset disk.Actually,when you add a password to your pc,the first thing you should do is creating a disk in case you lost the password.But how to make a password reset disk after you have lost the password ? Follow these
You need to prepare:
1:A blank CD/DVD or USB flash drive
2.A computer which can link to internet
3.A program called Windows Password Key
Then let's begin
Step 1.Login to a PC which can link to internet,Download and install the program from in that PC
Step 2.Run the program and burn to CD/DVD OR USB flash drive
Step 3.Turn to your locked PC,insert the newly create CD or USB to your drive.Reboot the Computer and then follow the instructions,it is very easy to use.
Posted on Nov 15, 2010
In a word, no. http://www.fixya.com/support/r5393255-windows_password_recovery
I have no faith in these bootleg files but as it has been on Fixya in the past, try this link:
Hope that helps.
Posted on Nov 12, 2010
Hack HP Computer Password ' Erase HP Desktop / Laptop Password Without Being a Hacker
Posted on Apr 27, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Computer is booting from a non-bootable source
Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM. First verify that no floppy diskette
or CD is in the computer, unless you are attempting to boot from a diskette.
Note: This error has also been known to occur when a
memory stick is in a card reader and the computer is attempting to boot from it.
If you have any card reader or flash reader make sure that no memory
stick is inside the computer. Additionally disconnect all USB drives, cameras,
ipods, iphones, etc. from the computer.
If you are attempting to boot
from a floppy diskette and are receiving this error message it is
likely that the diskette does not have all the necessary files
or is corrupt.
If you are attempting to install
Windows XP or Windows 2000 and are receiving this error message as the
computer is booting verify that your computer BIOS
has the proper boot settings. For example, if you are attempting to run
the install from the CD-ROM make sure the CD-ROM is the first boot
device, and not the hard disk drive.
Second, when the computer is booting you should receive the below prompt.
Press any key to boot from the CD
Important: When you see this message press any key such as the Enter key immediately, otherwise it will try booting from the hard drive and likely get the NTLDR error again.
If you are not receiving the above message and your BIOS boot options
are set properly it's also possible that your CD-ROM drive may not be
booting from the CD-ROM properly. Verify the jumpers are set properly on
the CD-ROM drive.
Computer hard disk drive is not properly setup in BIOS
or NTDETECT.COM file
Sep 24, 2011 | Computers & Internet
on Jan 11, 2011 | Computers & Internet
Dec 22, 2010 | Computers & Internet
Feb 23, 2010 | Computers & Internet
Jun 21, 2009 | Dell Latitude C840 24X CD-R W/ DVD Combo...
Jun 05, 2009 | IBM Computers & Internet
Oct 31, 2008 | Acer Aspire 3690-2196 Notebook
Aug 19, 2008 | Intel (AXXSCD) (s2894109) Internal 24x...
Aug 25, 2007 | Microsoft Windows XP Professional With...
Sep 20, 2017 | AOL Computers & Internet
109 people viewed this question
Usually answered in minutes!