Question about Sony Radio Communications

2 Answers

My son has a Sony PS3 headset - bluetooth. It is around three months old and has worked fine until yesterday . He is unable to communicate with his friends and is unable to turn off. The green power light and the Red mic/mute circle light flash alternately. Hope you can help?

Posted by on

  • forrestgumps Nov 13, 2010

    Thanks but still not working. it has stopped flashing red and green when on black ops for example the icon for the headset is at the side but when my son talks it does not flash. hope i have explained this ok

    cheers

  • forrestgumps Nov 13, 2010

    My son has a Sony PS3 headset - bluetooth. It is around three months old and has worked fine until yesterday . He is unable to communicate with his friends and is unable to turn off. The green power light and the Red mic/mute circle light flash alternately. Hope you can help?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 515 Answers

It seems that the headset stuck in the pairing process. You can pair (register) the headset again with the PS3™ system using automatic mode. You will need to remove the headset from the list of registered devices, and then repeat the pairing process.

Posted on Nov 14, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 11,800 Answers

Alternate blinking the green power button and the red mic mute circular ring - this means its in discovery mode = it's no longer paired .
You must do the pairing again:make sure it's fully charged then just plug it in with the USB cable connected directly to the headset (no cradle), and it'll automatically become paired with your PS3.

Posted on Nov 12, 2010

  • Azrael SRL Nov 13, 2010

    If it has stopped flashing and it's recognized in the games then it is paired and active. If even now it doesn't work then it's defective, it will have to be replaced - it can't be repaired. If it's only 3 months old then it should be in the warranty period so it should be exchanged with a new one for free.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Connect sony dr-tn200 bluetooth headset to samsung mx-h620 hifi


Bluetooth is a short-range (33 feet/10 meters) wireless technology that allows two Bluetooth-enabled devices to connect wirelessly and communicate between them. If your son's Samsung MX-H620 HIFI is not Bluetooth-enabled, the two devices will not be able to connect in any way. If the headset were corded (it is not because it is Bluetooth) you could plug its cord into the headphone (LINE/AUX IN) jack on the Samsung. if the Samsung system is not Bluetooth, the only option is to find a suitable Bluetooth adapter to make it Bluetooth-enabled. However, you can use the Sony headset to listen to music or make phone calls from Bluetooth-enabled devices that you own such as phone, tablet, iPod, iPad.

Dec 29, 2014 | Samsung Radio Communications

1 Answer

How do you connect to the ps3?


*NB: it will ONLY work for communications, NOT for game audio. (lame az, I know!)
  1. hold in the headset's power-on button until it flashes red/blue for pairing.
  2. Next make the ps3 scan: settings> accessories settings> manage bluetooth devices> register device (yes)> scan and add. (probably passkey 0000)

How to connect any Bluetooth headset to your PS3

Dec 25, 2013 | Creative WP-350 Headset

1 Answer

How do you get the ps3 to pick up the blue tooth head set


Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be ‘paired’ so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the “Settings” menu, press X on “Accessory Settings.”

3. Press X on the icon labeled: “Manage Bluetooth® Devices.”

4. Scroll down and press X on the icon labeled: “Register New Device.”

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.


6. Once the Headset’s LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on “Start Scanning.”

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate “8860” from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: “Register completed”

Trouble Shooting
Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Source: www.madcatz.com/faq

Aug 11, 2010 | Mad Catz PS3 Bluetooth® Headset Wireless...

3 Answers

Unable to pair my bluetooth with PS3


Is The Blue Tooth In Find Mode? To Inable Find Mode Hold The Power Button Until The Blue Tooth Stays Solid Lit Or Flashes. Then Search For It With Your Device And Once Completed Hit The Power Button Again And It Should Be Able To Pair Right Up.

Mar 04, 2009 | Samsung BLUETOOTH? WEP210 MONO HEADSET...

1 Answer

Bluetooth headset makes game play jump


Hi and Welcome To FixYa, i had it with my ps3 i had to buy another bluetooth head set went though 3 a jabra,Phonix,and Nokia but was incompatible with my ps3 and did the same thing i found out the cheaper the bluetooth headset the better it was with my ps3 i got one from Argos in the end was £12 and works a treat no recharge on it but it works that's the main thing and still working 9 months later with no problems No Jumping or Skipping anymore also i found out that reformatting my ps3 made this problem better u should try that first its easy to do and don't take long

hope this helps ya

Feb 06, 2009 | Sony Playstation 3 (PS3) Console

3 Answers

Instruction manual for the datel bluetooth headset for Sony ps3


Here is a link for Sony with detailed instructions for pairing the bluetooth device to the PS3.

http://tinyurl.com/53tg8k
When it propts you for a code, use 0000.

Good luck to you and your son!! Happy gaming!!

Aug 21, 2008 | Microsoft 20GB Hard Drive for Xbox 360

6 Answers

Mic Problems with H700 and Ps3


hmm.
1.well try pressing those little arrow buttons on the top and bottom of the headset.
2.Try charging it until the ring turns green.
3.On your PS3 go into accessories, audio and increase the output volume

Hope i helped :)

May 24, 2008 | Motorola Mobility H700 Wireless Headset

1 Answer

Headset


Some bluetooth headsets have been known to not link up after the playstation has been turned off, or if the power goes out. You may have to redo the linking process again to make it work. Some headsets this has to be done every time the playstation is turned on. Another possible scenario is that the plantronics has on/off and a bypass function when its turned on. If you turn on the headset, try tapping the on button again and see if it links up.

Hope this helps.

Apr 05, 2008 | Sony Playstation 3 (PS3) Console

2 Answers

Linking a BT125 Bluetooth to my PS3


I had the same problem trying to connect my old Jabra BT125 headset to my brothers PS3, here's what worked for me:

-Turn on the headset by holding down the button but keeping it down until a solid light comes on.

This puts the headset into discovery mode, you can the start scanning for the device and it should find it.

Jan 26, 2008 | Jabra BT125 Headset

1 Answer

H350 pairing with Blackjack


1. SWITCH ON THE POWERBUTTON BTHS AND PRESS THE PUSHBUTTON FOR A FEW SECONDS UNTIL THE
LIGHT STOPS BLINKING.
NOW YOU CAN SEARCH FOR THE BTHS. AFTER SEARCHING PAIR IT ,PASSSWORD IS 0000.

Sep 14, 2007 | Motorola Mobility H350 Wireless Headset

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

1,236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Radio Communications Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

basssplayer

Level 1 Expert

4 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Are you a Sony Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...