Using keyboard, sound does not work - Logitech Computers & Internet

Sounds like your keyboard is bad. try another one.

try to re-heat your keyboard by the use of hair drier for a couple of seconds.

use the audio output to send the keyboards internal patch sounds, or use a usb midi adapter to use the keyboard to trigger the garageband midi sounds, if the keyboard has a midi output, that is. the usb output requires software drivers to use, and IS NOT mac compatible. You may have to select a midi source in garage band preferences or settings if you are using midi.

I think you have a multimedia keyboard and you hear nothing when you try to use it or your keyboard is not working.Well if you remove the keyboard do you hear anything from the speakers?You might want to check the volume levels,make sure nothing is muted.The device you are trying to play make sure the levels are turned up.
Good luck

Hi Danadepatter,

You have to check were the problems is, with exclude way.

1. you first find out if your "master keyboard" really works: Try to run another program where you can run the the keyboard(you can use a trial and the uninstall it after)

2. if that works then it is another place not the keyboard, then it can bee the program / sound card / configuration . you can find the reason manual here :
http://www.scribd.com/doc/13823619/Reason-4-Manual-English
Check if the configuration to the midi keyboard is ok.
FOR THE SOUND CARD: be sure that you do not have anything else that can interrupt the sound card. Shut down other recorders and other software that use the sound card and bee sure that you use the same sound card configuration (normally it is realtec the default)

If nothing happens please go to the support here for Reason software :
http://www.propellerheads.se/company/contact/techsupport/index.cfm?fuseaction=get_article&article=reasonsupport

Hope that helps
Have a nice weekend

Please rate my answer

Relax, nothing wrong....
click is simply a user's preference.
Old old keyboards used to click all by themselves. Now the keyboard uses the onboard speaker to do its clicking.
Go to "Sounds" in the [Control Panel] and un-mute the speaker.
I prefer no sound...

sounds like those are your funtion keys on the lower left of your keyboard press the ftn key and try it then they should work there is alot of different things they are used for

Sounds like you might need a new keyboard.  

when you loaded the software for the keyboard, the buttons on the keyboard for functions will be active, have you made sure that the mute key on the keyboard is not pressed 'on' to mute the sound?

my dash doesn't have instant messgaing.... what can i do to get the instant messgaing on my phone... plus the keyboard is not functioning well like it suppose to.. it works as key pad like d regular phone..but i can't use the whole keyboard...what can i do...???