Question about HP (D7580-60003) Motherboard

Open Question

Updated bios for HP media center 8003f. need to undo as I didn't see that the bios update was for systems with 400 mb of ram keep getting blue screen that the system was shut down to protect it. Had a hard time to get it to go back to factory condition but it did and no new programs were installed.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
quadrantmind
  • 14 Answers

SOURCE: Hp xw 6000, keeps shuuting down during initial boot up.

reseat ram if not i'd say to take 1 stick of ram at a time and start the computer with such might be a ram issue or run memtest 1.7 which can be downloaded here http://www.memtest86.com/ boot to cd once downloaded and burned to test ram

Posted on Mar 19, 2008

Ad
oldnovii
  • 667 Answers

SOURCE: HP PAVILLION dv 9000 laptop new bios instalation instructions

Would you mind just adding a comment to this post. Please just copy the text body part of the email and paste in a comment. No need for your name or email addy or personal info. Also please tell me which operating system you are using. Thanks.

Posted on Mar 28, 2008

sivareddy040
  • 53 Answers

SOURCE: bios update

Hello!!


I am not sure after installing which update the display has gone. I mean Windows update or HP software update or BIOS update.

Let me take the senario of the BIOS update and assist you in this regard.

If the display has gone after installing the BIOS update, then the issue cases are 1. Installed wrong BIOS update 2. Notebooks might have restarted or hanged while installing the BIOS update.

In both the cases BIOS will get currupt and there will be no display on the notebook.

Solution for the issue is: If you notebook is under warranty, HP will arrange for mail-in repair, plss contact HP. If the notebook is out of warranty, then you need to contact HP authorized service center.

Posted on Aug 08, 2008

SOURCE: hp pavilion m7330n motherboard issue

The system in question requires motherboard model ms-7184 and can be found on ebay for less than $100.  If your repair guy used a different motherboard you will get the issues described and need to reinstall the OS.  It is impracticle to put any more than $200 in most desktop computers more than 2 years old, your repair guy should have advised you of this straight off.  Find a new person to take your equipment.

Posted on Sep 08, 2008

  • 30 Answers

SOURCE: I want to upgrade my HP BA 600 Mother Board`s RAM Capacity

Hello,
Most likely your MB is too old for this upgrade although there is a chance you could flash your bios (reprogram your computer's brain to accept the new memory providing hp has a flash for it).
here is a link for the latest bios flash for your computer, use at your own risk.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=32895&swItem=vc3903en&prodNameId=20305&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=0
good luck.
Thank you,
agadycom

Posted on Nov 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My presario sr5510f keeps on freezing


you need moore RAM.rockuo you got to little RAM from start your program fights ower it.i'am suppresed you succed to install windows 7 with so little RAM .you need to upgrade to 6 o 8 minium.then think of upgrade BIOS.when you upgrade the RAM be SURE you get the right kind.

Apr 09, 2013 | HP COMPAQ Presario SR5510F Athlon 64 X2...

1 Answer

Latest bios for HP Media Center PC?


sad how, how fixya AI guessing wrong??? pathetic, mess....
wow a very old media center, gen 2 of 14 or so.
HP does not support this quote
HP Media Center m1070n Desktop PC,its RETIRED now
https://support.hp.com/us-en/retired-products


The BIOS does not do that!
what HP, it has full name and model.
the MMC controls this, and is very strict. (mem-managment controller)
the memory you are buying is no good. for YOUR PC.
this is so very common
and worse every year,
ever heard of Crucial or Kingston memory
they can fit up memory for you, it very complex.
not just DMM1, 2,3, but speed, min.
density rules.
chip count rules
chip voltage, 1.3. 1.5 or both or?
Total memory max allowed and PER SOCKET !
and even number of chips per side of stick , rule.
that worst was intel i5 old processors.
those are facts, and only the exact motherboard you have a
and what processor is there, (and if mmc is external to processor that)
matter.
? this?
M1070n

finding data on such and old box.
is not easy but google can dig up bits.
why not ask Kingston? for help,.

key facts are, (besides old)
HP Media Center m1070n Desktop PC
Intel Pentium 4 520 / 2.8 GHz
Intel 915P Express (my guess, mmc is inside here)
oops
  • 512 MB / 4 GB (max)
  • Memory Speed 400 MHz
  • Memory Specification Compliance
    PC3200
  • Features
    unbuffered
  • Configuration Features
    2 x 256 MB
  • Technology
    DDR SDRAM
  • Installed Size
    512 MB
  • Data Integrity Check
    non-ECC
  • 4 GB
  • Form Factor
    DIMM 184-pin
looks like 1GB max per slot , 1 to 4.
good luck finding SDRAM in 2017 that works.

why not find a newer box? (pc) say 2010 or newer.,
they will run better and can buy ram easy
vastly better.... even Goodwill has them for few bucks
or this.
or like this,

https://www.walmart.com/ip/Refurbished-HP-7800-Desktop-PC-with-Intel-Core-2-Duo-Processor-4GB-Memory-19-Monitor-250GB-Hard-Drive-and-Windows-10-Home/54997432

May 21, 2017 | HP Pavilion Media Center M1070n...

1 Answer

Hi , my motherboard is k7n2 delta 2 platinum ms-6570e , i've had a problem to install windows xp , but finally i did it . Now i've got problem to install some programs like office , nero itp....


Hi, you can download the drivers manualy from here:

http://www.msi.com/product/mb/K7N2-Delta2-Platinum.html#/?div=Driver&os=XP%2032

The drivers or the bios file needs to be unziped before installation.
Install first the system and chipset drivers.

Try also to run windows update.
You will need the updates to install office and etc.

Try also to add more memory ( ram ) to your system.

Supports DDR200/266/333/400

Aug 24, 2011 | MSI K7N2 Delta2 Platinum Motherboard

3 Answers

I bought new 2gb ddr2 with 800 mhz and its not working on my motherboard d102ggc2 can u plz help me with the solution


i guess you did not check the compatibility of the RAMs to your MB limitations....
the only solution is to return the RAMs and get the RAMs that is supported by your MB.....

the MB (D102GGC2) can hold only a max of 533 mhz and max of 1GB each in each slot of RAM....
so if you are trying to install one 2GB card of 800 mhz IT WIILL NOT WORK....
get TWO RAM cards of 1GB each (total 2GB) of RAM.... each of 400 mhz....

hope this helps...
Reg
Suresh

to check what your MB supports, look for the details below...
http://www.intel.com/support/motherboards/desktop/d102ggc2/sb/CS-029352.htm


Intel® Desktop Board D102GGC2 Technical product specification circuit388.gif Product Specification
This product specification applies only to standard D102GGC2 boards with BIOS identifier GC11020M.86A. Changes to this specification will be published in the D102GGC2 Desktop Board Specification Update before being incorporated into a revision of this document.
pdf.gif D102GGC2 Technical Product Specification [PDF]
File Name: D102GGC2_TechProdSpec.pdf
Size: 1,706,923 bytes
Date: April 2006

Specification Update
This document is an update to the specifications contained in the D102GGC2 Technical Product Specification. It is intended for hardware system manufacturers and software developers of applications, operating systems, or tools. It contains specification changes, errata, specification clarifications, and documentation changes.
pdf.gif D102GGC2 Desktop Board Specification Update [PDF]
File Name: D102GGC2_SpecUpdate03.pdf
Size: 88,102 bytes
Date: November 2006

Apr 27, 2011 | Intel D102GGC2 Motherboard

2 Answers

I upgraded my RAM to 1 Gig but it's still showing only 256 meg. Why?


Hi this model sopport 2Gig Memory Ram.


RAM Technology DDR SDRAM Installed RAM 512 MB Max Supported RAM 2 GB Number of Memory Slots 2 x DIMMs Supported RAM Speeds 400 MHz • 333 MHz Installed Cache Memory 256 KB
RAM Technology DDR SDRAM Installed RAM 512 MB Max Supported RAM 2 GB Number of Memory Slots 2 x DIMMs Supported RAM Speeds 400 MHz • 333 MHz Installed Cache Memory 256 KB
RAM Technology DDR SDRAM Installed RAM 512 MB Max Supported RAM 2 GB Number of Memory Slots 2 x DIMMs Supported RAM Speeds 400 MHz • 333 MHz Installed Cache Memory 256 KB
RAM Technology DDR SDRAM
Installed RAM 512 MB
Max Supported RAM 2 GB
Number of Memory Slots 2 x DIMMs
Supported RAM Speeds 400 MHz • 333 MHz
Installed Cache Memory 256 KB

Please check in to your Bios system maybe share memory Video or capacity is setting

Nov 03, 2010 | Dell Dimension B110 PC Desktop

1 Answer

I need an updated bios for a M7VIG 400 motherboard


go to their support page here http://www.biostar.com.tw/app/en/mb/driver.php?S_ID=273 then click on the BIOS tab for the file. BE SURE to read all directions carefully. print them and follow them exactly. a faulty bios update can totally screw up your system

Sep 14, 2010 | Biostar M7VIG-400 (M7VIG 400-COMBO4)...

1 Answer

Only half of the RAM is active


HI,

Well, you need to understand that The first 2 slots on the board supports DDR2 and the last 2 supports DDR, so first off make sure that your using the first two slots. With that said, I assume that the Ram are identical? If not, that can be problematic. The next thing I would check is the bUS speed, and check with the mfg to make sure they are compatible modules. It supports DDR 333/400 and DDR2 533/400
As well as supports 128/256/512/1024 Mb technology up to 2GB. If your memory falls within these specifications, then put one chip on at a time to test to make sure that each one works independently, as well as try each slot independently. , If both work that's a good thing. You also need to update your BIOS which you can do HERE. If you've checked your slots and each memory stick, and you've updated BIOS, they should work. If not, they there is something wrong with the board when two chips are inserted, your connector between the two slots must be damaged. However, most unlikely, If you follow the above suggestion, you should be OK.

Good Luck,

Mark

Dec 29, 2009 | Foxconn P4M800P7MA-RS2 Motherboard

1 Answer

Bios update


Hello!!


I am not sure after installing which update the display has gone. I mean Windows update or HP software update or BIOS update.

Let me take the senario of the BIOS update and assist you in this regard.

If the display has gone after installing the BIOS update, then the issue cases are 1. Installed wrong BIOS update 2. Notebooks might have restarted or hanged while installing the BIOS update.

In both the cases BIOS will get currupt and there will be no display on the notebook.

Solution for the issue is: If you notebook is under warranty, HP will arrange for mail-in repair, plss contact HP. If the notebook is out of warranty, then you need to contact HP authorized service center.

Aug 07, 2008 | HP Compaq nx7300 Notebook

2 Answers

My Dell C610 won't reconize the second stick of 256 mb memory


As the computer boots, it detects the additional memory and automatically updates the system configuration information
where did you get the memory?
If it is in properly and does't work,it is either bad or the wrong part number for your Dell C610

Nov 27, 2007 | Dell Latitude C610 Notebook

Not finding what you are looking for?
HP (D7580-60003) Motherboard Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...