Question about Audio & Video Receivers

1 Answer

Fisher stereo that has no display and the cd player keeps flashing a M-Error

Posted by on

  • keetonda Dec 09, 2008

    I have the same m-error on my (fisher tad 993) cd display and tried to clear the error by pushing the reset button on the driver board. The error cleared momentarily but returned. Also my cd wheel does not rotate when and I believe it might be the clutch gear. What is the part number for the gear, I want to try replacing it.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 624 Answers

If this is a multi-disc cd player with a carosel that holds lots of disc's the problem with the cd player is a clutch gear that is very difficult to replace unless you have some experience at changing it.

If you think you can replace the gear reply back and I will give you the part number for the clutch gear.

I would need the model number of the unit to be sure it is the same problem I am so familiar with. It would be very dificult to explain thru text messages how to replace this gear, the entire cd mechinism must be taken apart.

The display problem is probably a lamp that is burned out or the voltage supply to the lamp has a defective part.

Once again I would need the model number of the unit to give you any further details.

A repair center could fix this for around $100 to $150 depending on their rates.

If you have no experience repairing electronics it is advisable that you do not attempt this yourself, you could cause more damage to the unit and the repair would cost even more money.

Please let me know if I can be of any further help.

Posted on Jun 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What kind of dvd player and tv do i need for my fisher rs 929 receiver


Whatever your budget can afford. There is no special TV or DVD player required.

Aug 27, 2014 | Fisher Am Fm Stereo Receiver Tuner...

1 Answer

CD player displays error code: ER-1


That error code means an unknown error has occurred. Try cleaning the player itself, along with the CD's prior to insertion to see if that helps.

Feb 02, 2014 | Dual XD1228 CD Receiver

1 Answer

Fisher studio 60 cd player,constant M-error..Disks are all in the slots..


The CD feed gear is mis-aligned or broke. It need to be disassembled and repaired. Underneath the drive is a gear that drives the CD into place before it plays - it's stuck or broken. This is a common problem.

Feb 23, 2011 | Fisher Audio & Video Receivers

1 Answer

I have a fisher ca-9335 integrated stereo amplifier thats hooked up to sanyo tp 1010 turn table and plays out of yamaha ns-70t speakers. a simple jvc cd player is also hooked up to the speakers but not to...


Something doesn't add up. You mention two connections to the speakers - CA-9335 and a "simple jvc cd player". Is that true? If so, you might want to UNconnect the CD from the speakers and run it into the receiver where it belongs. An amp isn't designed to share the load with another live device; or even have electrical contact with anything BUT speakers.


Did you actually find documentation that supports this hook-up? Or just winging it?

Feb 20, 2011 | Audio & Video Receivers

1 Answer

How do I hook up a fisher stereo to my tv so I can here the sound from my tv on my stereo speakers?


You have to have audio outputs on either your TV or VCR/DVD to input into your stereo. Look for the red and white RCA connectors. Most TV's have RCA inputs for audio and video but not always outputs. VCR/DVD players all have audio out so if you have one of these units connect a RCA cable to a input of your Fisher amp. I hope this helps

Dec 01, 2008 | Fisher Audio & Video Receivers

2 Answers

My panasonic SA-AK750 hi fi stereo keeps saying disc change error and the changer will not open or change disc. ive tried turning it off at the wall and then turning it on again but its still displaying...


Tienes que llevarlo a un centro de reparaciones ya que el sistema de cd esta fuera de tiempo por eso no funciona nada.Hasta que no lo pongan a tiempo no va a funcionar.

Apr 06, 2008 | Audio & Video Receivers

1 Answer

JVC KD-G431 IN CAR CD PLAYER "000ZAAA" Error


I had the same problem. It started when I tried to play an MP3 track from a "Creative Zen Vision M" Media Player. The result was the same as you describe = Maddening. It was extremely annoying that the CD player did not work. I thought I had broken the equipment.

Then my wife read the product hand book , and noticed on page 2 http://jvcmobile.co.uk/documents/products/KD-G431%20Instructions.pdf it showed, where using a pen you can reset the equipment back to the original settings. I thought I might as well give a try. It worked = Fixed. Amazing. I was so relieved. Such an easy solution.

Give it a go. I reckon there is a good chance it will fix your problem, and you will also be very relieved. Just use a basic MP3 player in future. GOOD LUCK !!!

Mar 20, 2008 | Audio & Video Receivers

1 Answer

JVC STEREO PROBLEM


Did you unplug the unit and leave it that way for 10-20 mins and try again?

Feb 24, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68427 Answers

yadayada
yadayada

Level 3 Expert

61292 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...