Question about Computers & Internet

1 Answer

When I follow [as instructed] the CD explicitly whether it's the wireless setup of if I just try to do it using just the USB setup---it sets up quickly and in a normal manner UNTIL it gets to the "configuration"---THEN after 15-20 minutes "Fatal Error" --- and then "Run Time Error" after that. I have an HP wireless laptop with Vista. I made 12 attempts yesterday AND today wasted my time calling HP and speaking with someone in India for HOURS who was also unsuccessful and then told me he would call me back!!!! Haven't heard from him and it's been 6 hours. Don't expect a call.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,653 Answers

What's the model of the laptop?
Do you have the means of connecting to the internet with a WIRED cable?
We can solve this easily, don't worry ;)

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How i setup for wireless


Hi
If you go here:
Product Support Dell US

you can click on the "PDF" link next to Manuals, and the manual will be downloaded to your browser. It can then be saved to your computer for future reference.
Pages 30 to 35 give displays all the settings for wireless operation, you need to enter the correct settings for your wireless network and the printer should work.
You may find it easier to connect the printer via USB and then use the setup CD to setup wireless for the printer which will then allow you to disconnect USB & start using wireless. This is on pages 92 & following.

Dec 16, 2014 | Dell 3110cn Laser Printer

1 Answer

My At&t 2Wire 3800 BGV-B will connect through the USB Netopia 3D Reach adapter using the 3D Reach Utility and my Sony BR and Cell Phone but, It will not connect through my Win Xp Wireless Zero Conf....


Insert the 2Wire CD and follow the on-screen instructions. If the 2Wire Setup Wizard does not
automatically start:
- Double-click the My Computer icon located on the desktop.
- Double-click the icon that corresponds to your CD-ROM drive.
- Double-click Setup.exe and follow the on-screen instructions.
2. If prompted by the Setup Wizard, enter the 20-digit key code you received from your service provider.
If you were not provided with a key code, contact your service provider.

Apr 27, 2012 | AT&T Computers & Internet

3 Answers

I bought AE1000 wireless N USB adapter, and i cant get it to install, says "wireless adapter setup requires that wireless connections are managed by Microsoft windows, says to try the following,...


When you insert the setup disk on your computer, you can exit from the setup and then connect the adapter to the computer and a new window will popup "Found New Hardware Wizzard" and in that select the option "Install the drivers Automatically" and click on next, so it will automatically search for the drivers and install it on your computer... Once the drivers are installed on your computer then you can try to connect to your wireless network.

Setup

The Linksys AE1000 Wireless USB Adapter helps you connect your computer to a wireless network for quick Internet access. Installing the Linksys AE1000 is fairly easy. Just follow the steps below in setting up the Linksys AE1000 on your computer or laptop.

Minimum system requirements
- A computer with 1 GHz or faster processor.
- 512MB or more RAM.
- An available USB port.

NOTE: The Linksys AE1000 is supported for Windows 7, Vista SP1 and XP SP3 but NOT for Mac.

Step 1:
Insert the Setup CD into your CD-ROM drive.

Step 2:
Click Set up your Linksys Adapter. Proceed to Step 4.

If you do not see this, click Start on your computer and click Computer. Double-click on your CD-ROM drive. Continue to Step 3.

NOTE: For Windows XP, the file may be known as Setup.exe.

Step 3:
Read the License Agreement and click Next.

kb21488-001_en.png


Step 4:
Insert the Wireless USB Adapter into a USB port on your computer or laptop.

kb21488-002_en.png


Alternatively, you can also use the USB Extension Base to connect the Wireless USB Adapter. Plug the Wireless USB Adapter into the USB Extension Base and connect the Base to a USB port on your computer or laptop.

kb21488-003_en.png


Step 5:
If you have an Easy Setup key, select Yes, I have an Easy Setup Key and click Next. Proceed to Step 8.

Otherwise, select No, I don't have an Easy Setup Key and click Next. Proceed to Step 6.

NOTE: For more information on Easy Setup Key, click here.

kb21488-004_en.png


Step 6:
Select your wireless network and click Next.

kb21488-005_en.png


Step 7:
If prompted, enter the wireless password for your network. Proceed to Step 10.

kb21488-006_en.png


Step 8:
Follow the on-screen instructions. Click Next once you have completed the on-screen instructions.

kb21488-007_en.png


Step 9:
The installation is complete when you see the screen below. Click OK.

kb21488-008_en.png


Step 10:
You are directed to the Cisco Connect screen. Click Close to exit.

kb21488-009_en.png


Nov 04, 2010 | Linksys AE1000 IEEE 80211abg IEEE80211n...

4 Answers

Quick instruction to install leeds asi/66887 wireless mouse


You need installation disc, if you have lost the CD, than go to this site Driver Update Software for XP Vista 7 8 and download their update tool. I hope I helped.
Micky

Feb 12, 2010 | Microsoft Wireless Notebook Optical Mouse...

1 Answer

Can't get it networked on my mac that has windows parallel xp cant find it


Hi
I recognize the importance of resolving this issue and I look forward in providing you with the necessary assistance you need.

Problem: Cannot get network on the Mac not specified
OS : MAC computer Windows installed on it
Printer Office jet 6500 Wireless.


Solution :
There are few thing which are required to know before we start trouble shooting

IMPORTANT : Before you can install the product, your wireless network must already be set up. (To set up your network, follow the instructions that came with your particular access point.)

IMPORTANT : Before you can install the product, you must have the following information about the network:
  • Network name : The network name is the SSID (Service Set Identifier).
  • Password : WEP key or WPA passphrase


For a new product:CD installation is a quick and easy method and if you do not have a CD, you can download the software you need.

CD installation : CD installation might not work if you are installing the product on a computer running a newer operating system that released AFTER the HP product released as the software on the CD is current to the date of the product release.

Downloading the HP Drivers :Downloading the software provides the best results for your older product. Even though it takes more time than using the CD, downloading the latest software can help you avoid installation issues. Downloading is also the recommended method if your computer operating system released after the HP product released. The software that you can download from the HP Web site is the most current software available for your product. HP often updates software and drivers AFTER the product and CD release to the market ..




Wireless installation: If you have not previously installed the software, follow these instructions.
Step one: Prepare for installation
1 Make sure that you have the following requirements before you begin:
  • Network name: The network name is the SSID (Service Set Identifier).
  • WEP key or WPA security passphrase
  • A computer that is connected to the wireless network.
  • Internet access. HP recommends broadband Internet access such as cable or DSL.
  • Your wireless-capable HP product. Place it close to the computer during the installation procedure.
  • A USB cable (used only during installation).
  • Administrator privileges or password
2. Make sure the product, access point, and computer are all on, and that the computer is connecting to the wireless network.
3. Connect the USB Cable to the rear port of the HP product and to any USB port on the computer.
4. Exit all applications running on your computer.Install the software
To install the product software, follow the steps for the method that you want to use (CD or download).
Method one: Install the software with the software CD
  1. Insert the Macintosh product CD into the CD drive of the computer.
  2. Double-click the HP software disc icon that displays under the Xp/Macintosh HD icon.
  3. Double-click the HP Installer icon. The HP Installer program opens.
  4. Follow the on-screen instructions to start the installation.
  5. When prompted to set up your device and software, select Continue .
  6. If a check mark does not appear, select Configure your device for a wireless network , and then select Continue.
  7. Follow the on-screen instructions to finish installing the software
Option two: Change connection type
1. Open HP Device Manager.
2. From the Information and Settings drop-down menu, click Setup Assistant . 3. The HP Setup Assistant window opens.
4. Follow the on-screen instructions to change your connection type to an existing wireless network.

Jan 04, 2010 | HP Officejet 6500 Wireless All-in-One...

1 Answer

How do you install wireless usb adaptor


A wireless USB adapter is a simple device that connects to an open USB port on your computer or laptop, allowing you to connect wirelessly to a network that is within range. They come with different connection speeds, ranges and security protection allowing you to connect to the Internet and use email servers, without complicated setups. Installing USB adapters to a computer is a simple task that anyone can perform. With just a few steps, you can access wireless networkmag-glass_10x10.gif where there is one.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); }); Difficulty: Moderately Easy Instructions
  1. Step 1 Research around before purchasing a wireless USB adapter. There are many different networking companies such as Belkin, Netgear and Linksys (see links in Resources). Compare prices and features such as speed in megabytes per second (mbps). Look for wireless USB adapters with a compliance of IEEE 802.11b or IEEE 802.11g. These options give you increased security on your network.
  2. Step 2 Plug your purchased USB into a USB port on your computer. Depending on the chosen model, you may have an installation CD. Place your installation CD into the CD-ROM on your computer, and follow the setup instructions to install the wireless USB drivers. Some adapters will install automatically.
  3. Step 3 Locate the wireless icon on the lower right of your computer screen. If there is an "X" marked on it, use the manual that comes with your purchased wireless USB adapter to configure it properly. The wireless icon usually lights up when a wireless connection point is detected.
  4. http://www.microsoft.com/windowsxp/using/networking/setup/wirelessadapter.mspx#2

Dec 11, 2008 | Computers & Internet

2 Answers

Help how to install Mikomi Mouse ,Keyboard and Webcam?


Here are step by step instructions:

1.Enter disk given with product into CD-ROM
2.Follow installation instructions
3. Enter adapter into computer
4. SEtup settings
5. Enjoy!

These can be used for the webcam to. If my answer helped you rate me! Good luck!

Nov 29, 2008 | Toshiba Wireless Mouse PA3205U-1ETC

1 Answer

I have an Acer Aspire 8.9....and I need to know what type of router I need to go wireless. I purchased one from Netgear, but it has a disc that must be installed and adapter that has to be used {with...


Aspire one does not have a CD/DVDROM however you can use another computer to be able to setup your router. You can probably ask a friend to use his/her laptop that has a CD/DVD ROM. After setting up the router, you can connect your Acer Aspire by letting it detect the wireless signal and connecting to your router wirelessly.

**You can also try to insert the installer disc on another PC and copy all the contents of the CD/DVD installer of the Netgear into a USB flash Drive. Plug the USB flash Drive into your Acer then run the setup file inside and follow the instructions.

Oct 26, 2008 | Computers & Internet

1 Answer

What do i need to do to install lexmark 2550 to my windows xp


Do not plug printer yet.
First put in the disk that came with the printer and run setup program.
If you do not have the printer CD download setup program from here: Windows XP

When the program starts follow instructions, connect printer to usb only when required explicitly by printer setup software.

Check also Lexmark X2530/X2550/X2580 User's Guide



Aug 15, 2008 | Computers & Internet

1 Answer

Basic Installation


Hi,

You need to use the D-Link USB WiFi Utility and manually configure the WiFi Network. Sometimes the built-in Windows WiFi Configuration doesn't work well with some USB WiFi and/or when no WEP/WPA security installed.  You may need to manually enter the SSID, "Open" encryption and "Disabled or "Not USed" security settings.

Good luck and kind regards.

Nov 01, 2007 | D-Link AirPlus G DWL-G122 802.11g/b...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...