Question about Craftsman 11324540 11324560 Drill Press Manual

1 Answer

Trying to find out what size chuck key for the 11324540 drill press.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,100 Answers


Check out the web site, type in the numbers you have here and you should find the part or the number, size, whatever. Check it out. If the web site doesn't work, just take the first part of it and dump the rest.

Posted on Nov 12, 2010

  • dilw6022 Nov 12, 2010

    i am trying to find a chuck key for this drill press and Sears says it is no longer available. Any ideas where I could purchase one?

  • Ned  White
    Ned White Nov 12, 2010

    The 1/2 chuck on most drill presses was/is a common chuck key, you should be able to find one at a flea market or ebay. I have a couple here, I'll admit, there are a couple different sizes but, it should not be a problem. When you get to the list of drill presses in the sears website, click on a bunch of them, see if the numbers are the same, then you will know if you have something rare or not. I just did the same thing with my planer, They don't have anything for my planer, but I found the same belt Number on all the planers, so I know I can get the belt from any model.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can i find a 5/8 in. chuck for a Pit Bull CH-16NF Drill press

Take it to a local engineering sales shop. They are all basically the same and fit into the shaft with a morse taper. You just need the correct taper.

  • 5/8 in. Keyed Drill Press Chuck ' Princess Auto
    • 4.5/5
    • 2 REVIEWS
    Email Signup. Never miss a sale and receive special online only offers.
  • King Canada KDC-58M Chuck, Drill Press, 5/8" JT6 for ... King Canada KDC-58M Chuck, Drill Press, 5/8" JT6 for Milling At East Coast Power Tools
  • 5/8 in. Keyed Drill Press Chuck ' Princess Auto Help others make a decision about this product by sharing your experience.
  • Related searches for 5/8 in. chuck for a Drill press
  • Woodstock D3455 Drill Chuck, 5/8-Inch by JT33 - This item: Woodstock D3455 Drill Chuck, 5/8-Inch by JT33 CDN$ 47.71. In Stock. Ships from and sold by FREE Shipping. ... (Canadian Tire) Drill Press.
  • 5/8 Drill Chuck ' eBay 2q== Suitable for drill presses or lathes spindle accepts R8 shank. Chuck key and R8-JT33 arbor are also included in the package. Special quenching treated ...
  • 5/8" Drill Press Chuck [MAG-DPC58] - $29.99 : KMS Tools ... KMS Tools & Equipment from Vancouver BC 5/8 ... Home > Metalworking > Lathes and Milling Machines > Chucks and Taper Adapters > 5/8" Drill Press Chuck 5 /8 ...
  • 1 32 5 8 Heavy Duty Drill Chuck with Chuck Key and R8 Arbor Amazon com

    Jun 05, 2016 | Drills

    1 Answer

    I lost my chuck key. what one will I need to buy

    39 No Drill Chuck Key? No Problem • How To Remove Drill ...

    ? 5:23
    Nov 19, 2010 - Uploaded by AskWoodMan
    All you need is a slip joint pliers and the proper size drill bit. When a drill chuck key goes missing, it can ...

    DIY - Missing Drill Chuck Key? - I Have a Solution! - YouTube

    ? 1:10

    Jan 16, 2016 | Drills

    1 Answer

    I need a chuck key for a 1987 duracraft drill press 40160

    Ebay has chuck keys. Chuck comes in different shank sizes. There are all in one types too, fits all chucks, cheap too.

    Oct 16, 2014 | Drills

    1 Answer

    What is the size of the replacement chuck key for the Duracraft DP514?

    The 1/2 inch is the max size drill that will fit into the chuck. There are only a few different key sizes, and sears sells them in their tool area. Easiest thing to do is find the size of the hole the chuck fits into by using the back end of a drill bit that fits the best. Measure that drill bit or take it with you to the store. You might find two different size keys with that size pilot hole, or maybe only one. Good luck!

    Dec 27, 2012 | Drills

    1 Answer

    Where can I get a replacement chuck key for a Parkside PBTM500 bench drill

    Sears sell chuck keys in all of the common sizes, of which there are only a few. If you have the old key, take it with you. If you don't have the old key then find the diameter of the three holes in the chuck (easy way to do this is to see what size drill fits into those holes) and measure as closely as you can the diameter of the gear you need. This is tapered, so measure (and double) the distance from the center of one of those three holes to the bottom of one of the gear notches on the ring on the chuck. You could also take the drill to the store with you!
    Good luck!

    Oct 03, 2012 | Drills

    1 Answer

    I purchased a secondhand Pentium Metalworker BT1000 drill press, but it came without a chuck key. I haven't been able to find one to fit, as the standard 1/4 inch shank is slightly too large. I think...

    if there is any manufacturers name on the chuck like "JACOBS or ROHM" you would also need the chuck size 13mm or something like that, you should be able to go to a BOX store that sells tools and find the correct one. ROHM has a completely different key than other brands. Usually on the key on the back of the packaging it will give you what it fits. I would also suggest taking a drill bit and trying one till it fits snug in the hole and then look for a key with that pilot size. Good luck

    Jun 24, 2011 | Drills

    1 Answer

    Need a chuck key for model 1140b,f powermatic drill press,manual part number 6285469.

    There are only a few sizes of chuck key. Easiest thing to do is first find a drill bit that fits in the hole where the key goes to determine the size of the pin on the end of the key. (Use the back end of the drill bit.) Then take any other chuck key you have and see how closely it fits or doesn't fit - just as a reference. Take the reference chuck key and the drill bit with you to Sears or any place that sells a good assortment of tools. You will probably be able to determine the correct size key from what they have available very easily. Good luck, Al K

    Mar 14, 2011 | Powermatic 1140 B,f 14 " Drill Press...

    1 Answer

    Where can I get a manuel for my drill press sears model #113-24560. Thanks, Chuck 702-622-7404

    the usual place I find them is at "" and under manuals type in your model number and you can download it frim there. If you have a problem let me know and I will try and find another source.

    Sep 23, 2010 | Craftsman 11324540 11324560 Drill Press...

    1 Answer

    3/8 Drill Driver, chuck replacement.

    hi friend,
    Step 1. Determine what kind of replacement drill chuck you want - a keyed chuck or key less chuck. Over the years, key less chucks have been widely used for handheld power tool drills, due to their improving grip torque and convenience.

    Step 2. If you prefer replacement key less chucks, then you have to know what type of key less chuck you will need - a single sleeve key less chuck or a double-sleeve chuck. You can simply determine it by checking your current chuck. If your current chuck is a keyed chuck or a double sleeve chuck, then you will need a replacement double-sleeve key less chuck. On the other hand, if your current chuck is a single sleeve chuck, then you should get a replacement single sleeve chuck.


    Step 3. Confirm the threaded mount size (spindle size) on the chuck. 3/8"-24 threaded mount for 3/8" capacity drill chucks and 1/2"-20 threaded mount for 1/2" capacity drill chucks, but there are some exceptions where just the opposite may occur. To be safe, always check the threaded mount before you buy replacement drill chucks.

    hope this helps u
    please rate me.........................
    thank u for using fixya

    Nov 26, 2009 | Craftsman 19.2V C3 DRILL/DRIVER

    1 Answer

    Chuck key

    As a start, use drill bit that fits into blind hole in chuck, note size and find chuck key at hardware with same diameter

    Oct 26, 2009 | Clarke Power Products Clarke 16-Speed...

    Not finding what you are looking for?
    Craftsman 11324540 11324560 Drill Press Manual Logo

    Related Topics:

    194 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Craftsman Drills Experts

    Gareth Cockram
    Gareth Cockram

    Level 3 Expert

    661 Answers

    John Trevino

    Level 3 Expert

    1383 Answers


    Level 3 Expert

    75197 Answers

    Are you a Craftsman Drill Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides