Question about Casio FX-115ES Scientific Calculator

Ad

Hi friend, first will you on your calculator then click MODE(CLR) Button in thrice time then click 3(three) button and then again click 2(second) button then your calculator will change in normal mode. I hope this information is satisfication for you and thanks for join fixya!

Posted on Nov 12, 2010

Ad

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)

click here to download the app (for users in the US for now) and get all the help you need.

Goodluck!

Posted on Jan 02, 2017

Ad

Ambiguous case. 200 could have just one or 3. Check with your teacher what is meant here. If all figures are significant in 200, then your product will also have 3 sig fig: product=25400=2.54x10^4.

However if there is only one significant digit meant in 200, the result should rounded up to 30 000=3x10^4

However if there is only one significant digit meant in 200, the result should rounded up to 30 000=3x10^4

Aug 18, 2015 | Office Equipment & Supplies

A $20 part, the "inverter" inside the LCD case has failed.

Unfortunately for you, a qualified technician will charge you $50 to $75 for "one hour labour"

to disassemble your computer, remove the dead inverter, attach the new one, reassemble your computer, and test that replacing the inverter has solved the problem.

If you have to ask "how to replace the inverter", the best answer is "let a professional do it".

Unfortunately for you, a qualified technician will charge you $50 to $75 for "one hour labour"

to disassemble your computer, remove the dead inverter, attach the new one, reassemble your computer, and test that replacing the inverter has solved the problem.

If you have to ask "how to replace the inverter", the best answer is "let a professional do it".

Jul 13, 2011 | Dell Inspiron E1505 Notebook

1987 Plymouth Colt 1.5 liter SOHC L4 VIN "K"

or

1987 Plymouth Colt 1.6 liter Turbo DOHC L4 VIN "F"

1987 Plymouth Colt Vista 2.0 liter SOHC L4 VIN "D"

Hope this helps (remember to rate and comment this answer).

or

1987 Plymouth Colt 1.6 liter Turbo DOHC L4 VIN "F"

1987 Plymouth Colt Vista 2.0 liter SOHC L4 VIN "D"

Hope this helps (remember to rate and comment this answer).

May 05, 2011 | 1987 Plymouth Colt

Check the right serial (xxx) for your model (click over pic)...

Fig. 30: 1997 3.8L (VIN K) engine - Federal (JKE)

Fig. 31: 1997 3.8L (VIN K) engine - Federal (JKW)

Fig. 32: 1997 3.8L (VIN K) engine - Federal and California (JKO)

Fig. 33: 1997 3.8L (VIN K) engine - Canada (JKR)

Fig. 30: 1997 3.8L (VIN K) engine - Federal (JKE)

Fig. 31: 1997 3.8L (VIN K) engine - Federal (JKW)

Fig. 32: 1997 3.8L (VIN K) engine - Federal and California (JKO)

Fig. 33: 1997 3.8L (VIN K) engine - Canada (JKR)

Fig. 34: 1997 3.8L (VIN K) engine - Federal (JKJ)

Fig. 35: 1997 3.8L (VIN K) engine - Federal and California (JKK)

Hope helps (remember to rate this answer).

Mar 22, 2011 | 1997 Buick LeSabre

Thank you for posting your question here on Fixya.com.

The jets nearest to the ignitor are clogged causing a large ignition flame roll-out. You can try to fix this by unthreading them from the manifold and cleaning out all the orifices. Once done your unit should return to lighting normally.

If this answer does not fix your problem, please comment with additional details prior to rating the answer. You may also contact me thru our website at www.arrowpools.net. Positive feedback is appreciated once your problem is solved!

John

Mar 16, 2011 | Jandy Lite 2 Natural Gas Pilot Light...

Fig. Fig. 36 1984 305 (5.0L) V8 engine Canada

Fig. Fig. 37 1984 305 (5.0L) V8 engine California alternate

Hope this helps (remember to rate this answer).

Mar 15, 2011 | Chevrolet Caprice Classic Cars & Trucks

There are 4 sig figs (sfs) in 3.414.

Also,

The rule I use is the**"dot right-moving arrow"** rule.

I know it seems weird, but it is a very powerful rule, always reliable!

__Here is what you do__:

If the number has a dot in it (that is, if it has a decimal in it), imagine an arrow swooshing from left to right through the number. Start counting sig figs as soon as the imaginary arrow strikes a non-zero digit. Every digit the arrow goes through after it hits that first non-zero digit, is a significant digit (sig fig). The total number of sig figs is the sum of the first non-zero digit + all the following digits the arrow goes through after that. Very simple, right?

As an example, in 0.00098, the arrow sweeps through the leading zeros without counting until it stikes the first nonzero digit, 9. (BONK!!) So you must count it and the following digit (8). So the total number of sfs is only 2 for this number. Try it on the other numbers for practice.

__For a better closure, I guess I should explain the other related rule for sig figs__:

The "no-dot left arrow" rule. You can use this rule when a number does__not__ have a decimal in it. For example, the number 500 s. (I am using the same unit you gave in your quantities. As you can see, no decimal is shown. So you can not be sure the number has 3 sfs or not. It would only have 3 sig figs if you were informed it was an *exact* number. An exact number is a number which has been obtained by counting every object it represents. As in a classroom filled with 200 students, each one counted by their teacher during roll call.

To apply the*no-dot left-moving arrow* rule, simply imagine an arrow moving left until it hits the first non-zero digit. In this case, that digit is the 5, which is only one digit. Therefore, there is only 1 sig fig in 500 s.

Suggestion: Google up "sig figs" and get some more examples of quantities to practice counting sig figs. Also pay attention to the important related topic of proper rounding off of calculated quantities which have different numbers of sig figs. You will find this skill invaluable when you take a lab based chemistry or physics course!

Good luck!

###

Also,

- 4 sfs in 10.02
- 5 sfs in 58.325
- 2 sfs in 0.00098

The rule I use is the

I know it seems weird, but it is a very powerful rule, always reliable!

If the number has a dot in it (that is, if it has a decimal in it), imagine an arrow swooshing from left to right through the number. Start counting sig figs as soon as the imaginary arrow strikes a non-zero digit. Every digit the arrow goes through after it hits that first non-zero digit, is a significant digit (sig fig). The total number of sig figs is the sum of the first non-zero digit + all the following digits the arrow goes through after that. Very simple, right?

As an example, in 0.00098, the arrow sweeps through the leading zeros without counting until it stikes the first nonzero digit, 9. (BONK!!) So you must count it and the following digit (8). So the total number of sfs is only 2 for this number. Try it on the other numbers for practice.

The "no-dot left arrow" rule. You can use this rule when a number does

To apply the

Suggestion: Google up "sig figs" and get some more examples of quantities to practice counting sig figs. Also pay attention to the important related topic of proper rounding off of calculated quantities which have different numbers of sig figs. You will find this skill invaluable when you take a lab based chemistry or physics course!

Good luck!

###

Oct 11, 2010 | Scientific Explorer My First Chemistry Kit

switch the unit on.

indicator light illuminates on the control panel

(Fig. I). Each depression of the MODE key will

advance to a different mode setting (Cool -

Dehumidify - Fan - Auto )

speed can be adjusted. Press the FAN key (Fig.

J) to select the desired FAN SPEED setting. Your

selection will appear on the control panel. Each

depression of the fan key will advance to a

different fan speed (High - Med. - Low )

as shown in Fig. K. Otherwise fan speed is fixed

to low.

inside the room when using Dehumidify mode.

Jun 01, 2010 | Danby DPAC7099 Air Conditioner

If it stops after 22 seconds, that means the controller has detected a problem, usually a problem with the inverter, controller, magnetron, or a bad connection from one or the other.
Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.
You can find an authorized Panasonic servicer here.
In Canada, you can find an authorized Panasonic servicer here.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jun 11, 2009 | Panasonic Microwave Ovens

hold the button down for a long time

Apr 17, 2007 | Jabra COMMUNICATIONS BT160 Bluetooth...

81 people viewed this question

Usually answered in minutes!

×