Question about Kodak EASYSHARE 300 Photo Printer

2 Answers

How do i remove the ink cartridge from my easy share photo printer

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

Installing and removing the color cartridge:
> Open the cartridge door on the side of the photo printer.
> Check to make sure there is no slack in the color cartridge ribbon.
to remove the slack, push in on the cartridge spool, then rotae the spool closkwise.
>Be careful not to rotae the spool more than necessary. doing so could reduce the number of prints you are able to make.
> slide the color cartridge in, label side up, with the arrow pointing toward the printer. push the cartridge until it clicks into place then close the cartridge door...

http://www.retrevo.com/d/ds/progress?doc=397c6c90cd1e2a9479116e4175a15fe0&rk=0.11348919974620686

or you can check this link for the manual, you can see it on page 3.

Posted on Nov 12, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kodak Master
  • 4,338 Answers

See page 3, under "Getting Started" to chane/remove the ink cartridge:


http://www.kodak.com/global/plugins/acrobat/en/service/manuals/urg00384/PhotoPrinter300_GLB_en.pdf


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.

Thanks, Joe

Posted on Nov 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Epson R2400 paper and ink lights blinking red. Ink waste pad replaced and counter reset to 0. Lights still blinking red. Close inspection for any loose objects in printer but none found. Please advise....


Try to turn on your printer without the ink cartridges. When the printer starts and ask for the cartridges, put them back in.

(To remove the cartridges turn on the printer, watch the print head carriage move, when it is at the center quickly unplug the power cable, move the carriage by hand to a position where you can remove the cartridges, after removing the cartridges push the carriage to the right where it should be parked.)

Sep 02, 2010 | Epson Stylus Photo R2400 InkJet Printer

Tip

How to replace the ink cartridges on a Dell All-In-One 948 Inkjet Printer 1....


How to replace the ink cartridges on a Dell All-In-One 948 Inkjet Printer

1. Turn the printer on.

2. Lift the printer unit.

3. The ink cartridge carrier moves and will stops at the loading point unless the printer is busy.

4. Press down on the ink cartridge lever to raise each ink cartridge lid.

5. Remove the old ink cartridges from the printer.

6. If you are installing new ink cartridges, then remove the sticker and transparent tape from the back and bottom of each ink cartridge.

Note: If you are wanting to print photos you will want to install a photo cartridge along with the color cartridge. Also if you are switching between the photo and black cartridge but they still have ink in them be sure to store then in an air tight container so they do not dry out.

7. Insert the new ink cartridges. Making sure that the black or photo ink cartridge is secure in the left ink cartridge carrier and the color ink cartridge is secure in the right ink cartridge carrier.

8. Snap each lid closed

on Apr 01, 2010 | Dell 948 All-In-One InkJet Printer

1 Answer

Koadak easy share all in one, won't print in bacl


Check the version of AiO software you are using. We had to re-install the Aio Kodak software yesterday because the print que did not register when I changed the ink cartridges. The AiO would scan, but the computer side still thought it was out of ink.

Perhaps the latest software will fix your problem too.

Juliasew

Jan 30, 2010 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

I have a Kodak Easy Share 5500 AiO Printer. I was


Bad new catridge not impossible, I would return the catridge to the store.

Sep 03, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Photo ink


Remove the tab from your photo cartridge. Power the printer. Open the printer cover and the cartridges should move to be accessible. Remove the color cartridge: move it gently toward you and remove. Insert the photo cartridge. Close the printer cover.

Jun 13, 2009 | HP Photosmart C3180 All-In-One InkJet...

1 Answer

Lost manual-how do I get the toner/ink cartridge out to replace-won't budge


Hi can you also please provide the printer model number

thanks AJ

also check out this site

http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=7418&pq-locale=en_US&_requestid=3316

May 31, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

New ink cartridge for Kodak Easy Share 5300 will not work


The version of firmware you originally had on the printer when you changed the ink cartridge was bad. There is a known issue that when you put in a new ink cartridge when the printer is in the error state "COLOR INK EMPTY. REPLACE COLOR INK CARTRIDGE" the unit writes that value to the new ink cartridge so you will continue to have that error.

So to fix your problem Open the access door and Remove the ink cartridges. Then download and install the new Firmware. Heres the link.

Kodak AiO 5300 Firmware

Then sadly you have to go get another new ink tank and install it.

If you can get through to kodak you should request reimbursement of some sort like a free set of ink tanks.

I hope this helps

Mar 09, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

Not finding what you are looking for?
Kodak EASYSHARE 300 Photo Printer Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5054 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...