Question about Hobart Food Mixers

1 Answer

If my mixer the hobart A200FT has been sitting and not being turned on for more than 2 years. should i be worried that it may need to be serviced?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 99 Answers

Not sure on model number but I assume you mean the big honking dough mixer found in nearly every pizza restaurant.
I would be that with a good cleaning you would be good to go, that said, I would pay careful attention when you 1st start it up to see if it needs to be lubricated. (listen for squeaks or other sounds that may indicate a problem). otherwise they are pretty sound machines, (having no recollection of ever having to track down a repair man for one in 10 years in the restaurant business)
so two years of storage shouldn't do it any real harm.

Now if you have just purchased this item, I would tell you to ignore everything I just said, find a Hobart certified repair-men and verify that it is functioning in at least as good of a capacity as the seller claims.

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hobart N50 / KitchenAid Model G: how do i remove planetary?


you need to remove all the back screws then if it doesnt come tap it with arubber mallet it may be seized on

Nov 19, 2008 | Hobart N50 Stand Mixer

1 Answer

Hobart 20 quart mixer


Hey tom dont worry about it.These mixers hold a decent amount of grease.If you need any other info let me know.

Jul 23, 2008 | Hobart A200 Stand Mixer

1 Answer

Hobart N50


Some of the N50's were packed with a white grease. It tends to seperate. So the oil portion finds it's way out. It sounds like it is getting into the motor case, and is running down the inside of the column. Hobart now uses a brown clay based grease --- Darina 2.

If the amounts are small, and the mixer is not excessively noisy, I wouldn't be concerned. If you wanted to fix it, the transmission would need to be removed, cleaned, and repacked. For a Hobart tech, 3 hours labor, $45 grease, plus parts.

Jun 19, 2008 | Hobart N50 Stand Mixer

7 Answers

Manual for Hobart Mixer A200


You can go to hobartcorp.com and register for free then you can print or download a parts
manual to help you to do repair. Hobart provide service manual to their technician only.

May 05, 2008 | Hobart A200 Stand Mixer

2 Answers

Hobart 60 quart mixer


the motor protection board is doing its job.you should only use 1st speed to mix pizza dough.im a hobart technician and service these mixers all the time.let me know

Jan 27, 2008 | Hobart D340-6007 Mixer

2 Answers

Old hobart s-30 mixer oil


man you got an oldie but goodie mixer!im a hobart service tech for 8 years and have only seen about two dozen,unfortuantly parts for these units are exhuasted.as for the sight glass they do become cloudy over time and you cant determine the oil level.use a heavy gear case oil.the only way of telling is to drain the oil or if the unit is loud you should probably cange the oil.

Jan 20, 2008 | Hobart A200 Stand Mixer

3 Answers

N-50's need restoration


im a hobart service tech and service these mixers alot.the usual suspect problems is the tumbler assembly.service manuals from hobart---good luck they dont release them.i can help you out,

Jan 18, 2008 | Hobart N50 Stand Mixer

2 Answers

Motor is not running now


Im a service tech for hobart and repair these mixers often-is it worth repairing the unit?YES it is.I have never seen a motor burn up on these units,i have seen keys sheared and gears broken but thats the extent.There is a overload/reset button that sits on the back of the mixers pedistal,if its tripped when you push it in it will click.when these units need service it is usually from overloading the unit with too much product.Any other questions let me know.

Nov 30, 2007 | Hobart N50 Stand Mixer

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1267 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1826 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...