Question about Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

Hi im having problems with putting my dish network cable on my tv

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 286 Answers

I hope that this is working for you already, but you are still having issues, or have questions, I can help you out. If you are not getting a picture, you will want to make sure that the tv is on the correct channel/input. If you are at TV1(where the receiver is located) the tv needs to be on channel 3 or 4 and sometimes on an input. Such as video 1 or 2. If you are at TV2 (away from the receiver) then you want the tv to be on channel 60 or 73. I hope that this helps!!!!


Becki Barned
DISH Network Customer Service

Posted on Jan 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dish Network remote and receiver problem


Hi Tracy, my name is Mike Houston a Social Media Representative at DISH. With the TV2 remote working for both TVs, you will want to make sure the TV1 input on the receiver is connected to the TV cable (RCA or Coax cable) and TV2 input is connected to TV2 port on the back of the receiver. I will provide you our link explaining in more detail about connections. If you have any further questions I will provide you my e-mail; michael.ouston@dish.com. Here is the link I promised you: http://www.mydish.com/support/same-video-2-tvs

Aug 02, 2012 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Dish network Blue screen No "Signal


Hi john harrison!

A blue screen with "No Signal" is usually related to a video problem. The TV may be getting changed off the correct input/channel, or the video cable might be going bad.

If you have a spare, I would recommend a different cable and seeing if that fixes the problem. If it continues, verify the input/channel your TV is on when it receives a picture and if it goes out try putting it back on that input/channel.

If problems still continue I would be happy to review additional options with you. You can reach me here or at thomas.faust@dish.com

Tommy Faust
DISH Social Media Representative

Jun 03, 2012 | DISH Network Televison & Video

1 Answer

Getting snow when connecting polaroid tv to dish


Hi bevybab!

I would need more information as to which TV (1 or 2) you're experiencing the problem with, but if this is a new TV it sounds like you may need to change the modulator setup.

You can find the setting under Menu -> System Setup -> Installation -> Modulator Setup. If this is TV1, change the TV 1 Out to channel 3 or 4 depending on what you have listed. If this is TV2; change the mode from air to cable or cable to air and then put the TV on the channel it shows after selecting done to save the settings.

If you can provide more information or have any other questions let me know!

Tommy Faust
DISH Internet Response Team

Nov 27, 2011 | DISH Network 322 DTV Receiver

1 Answer

I disconnected power from the tv to install carpet & im not sure if iam hooking it back up correctly


danny_burse

I am assuming when you say you disconnected power from the TV to install carpet, you disconnected the cables from the receiver to your TV. Depending upon your installation, you have a cable that comes from the dish located outside that is connected to a splitter and has 2 cables coming off the splitter. The 2 cables will connect to SAT 1 and SAT 2 on the back of the receiver. Your TV 2 connection either goes directly to your TV 2 or goes to a second separator, connected to the UHF/VHF connector. If you still have problems with the connections, please email me at ray.calo@dishnetwork.com and I will assist you further.

Ray Calo
DISH Network

moz-screenshot.pngmoz-screenshot-1.png

Apr 21, 2011 | DISH Network 322 DTV Receiver

2 Answers

IM TRYING TO PROGRAM MY RCA TV REMOTE TO DISH NETWORK. PRODUCT INFO. MODEL # L40FHD41YX9 SERIAL # J516C40DI SERIES # F2 PLEASE CONTACT ME WITH SOLUTIONS TO THE PROBLEM


Hi amielynn221, my name is Mike Houston of DISH Network and I see youwant to program the RCA remote to the DISH Network receiver. We do have thecodes to program our DISH remote to the RCA TV we do not have the codes toprogram the RCA remote to DISH Network receivers, I will send a link to helpwith these steps. http://remotefinder.rca.com/default.aspx?site=rca

Apr 19, 2011 | RCA RCRN04GR Remote Control

2 Answers

Hi, my Phillips was hooked up and working fine directly to the DISH receiver using the HDMI 1. I moved and had to put the DISH receiver in another room and ran a coax cable to where the TV is now using...


Hey murphypat321,

Sounds like the TV may need to be on ch 73 cable rather than 60 air. Try switching the TV to 73, if it goes to 69 then put back on 60, if goes to 73 good. Once you have that set go to your TV1 and bring up the menu. Go to System Setup (6) -> Installation (1) -> Modulator Setup (5) and change the TV2 setup to either cable if on 73 or air if on 60 and the picture should come in if everything's hooked up.

Hope that helped! You can email me at thomas.faust@dishnetwork.com if the problem persists.

Tommy Faust
DISH Network

Mar 09, 2011 | Philips 42PFL5332D 42 in. LCD Television

1 Answer

Im trying to hook up my dvd recorder to my dish network dvr i have a jvc tv im using the red, white,and yellow cables but i dont get a pic or anything


No problem. o.k. line in to Dish receiver, out of receiver into dvd recorder, out of recorder, into tv. all units need to be powered on to work with this set up. anymore help, find me on facebook, Mark D Villandrie

Mar 06, 2011 | Televison & Video

1 Answer

I'm trying to hook up my dvd player & recorder but i can not get a picture on the tv. I put it on channel 3,4,60,73 like the book says


Hi donsol45my name is Mike Houston of DISH Network and I was reading over your post abouthooking up your DVD player to play. If you are using RCA cables that have Red,White and Yellow for tips. You can connect them directly to your TV and it willrun off your Video Input 1, 2 or 3 and if you're still having a problem please e-mailme. Michael.houston@dishnetwork.com

Feb 20, 2011 | DISH Network Televison & Video

1 Answer

I have dish network and dont know what channel to go to in order to use my dvd player. I cant find my manual.


Hi my nameis Mike Houston of DISH Network and I was going over your post and see you wantto watch a DVD and not sure what channel or input the TV should be on. Whilewatching a DVD the connectors may be RCA cables (Red, Yellow, White), if those arethe connections you will want to put the TV on either Video1 or Input1. Whilethe DISH Network should be connected to the TV by Coax cable (it will have ascrew on connection). The TV channel should be set to ch3 or ch4, if you haveany questions please e-mail me at michael.houston@dishnetwork.com.

Dec 01, 2010 | Sansui DTV2760 27" TV

1 Answer

Codes for jumbo remote to dish network


The code for the Dish- are 128,129,130,168,187,188,194,195.....hoppe this was helpful.....

Apr 22, 2010 | Innovage Jumbo Remote Control

Not finding what you are looking for?
Dynex 32 in. LCD Flat-Panel HDTV Logo

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5099 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...