Question about D-Link AirPlus DI-524 Wireless Router

1 Answer

I can not run 192.168.01 on my computer to change it to ppoe,i have a di-524 dlink and a motorola mstatea dsl modem,the other computers desk top and laptop can connect to the internet,but the one these componets are hardwired to cannot.has worked fine for years but stopped suddenly!!!!!!!!!!!

Posted by on

  • jnolan6524 Nov 12, 2010

    Sorry typo,I do type 192.168.0.1 but cannot open the wizard

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 4,338 Answers

You should type in 192.168.0.1.
In your request you have:



i can not run 192.168.01 on my computer to change it to ppoe,i have a di-524 dlink and a motorola mstatea dsl modem,the other computers desk top and laptop can connect to the internet,but the one these componets are hardwired to cannot.has worked fine for years but stopped suddenly!!!!!!!!!!!

Posted on Nov 12, 2010

  • jnolan6524 Nov 12, 2010

    Sorry typo,I do type 192.168.0.1 but cannot open the wizard

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do I need the power cord to my D-Link router to set up my computer?


From the port marked "Wan" on the back of the D-Link, install a lan cable to the cable/dsl modem.

Insert the lan cable from Dlink port labeled "1" to the PC.

The Dlink, cable/DSL modem, and PC should all be powered on.

I believe the router comes with a CD/DVD. Insert this into the PC to set up the router.

Be sure to read through your Dlink manual for additional instructions.

Dec 25, 2011 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Motorola MSTATEA takes long time to "reconnect"


Check the speed and call ISP tech support to run the line test
Before calling them do a complete power cycle
Turn the modem off and the computer off and router if any
Wait for 30 seconds and turn the modem on and wait for the lights to turn solid
Once ready turn router if you have else computer
Delete the temporary internet files browsing cookies,cache memory.
If the modem turns too hot after running for an hour please replace the modem
DSL light blinking green indicates that there s no proper signal to the modem
Check the wall jack for any loose contacts
If you have any filter check them too
Isolate them and try with it
Change them if possible

Feb 06, 2010 | AT&T High Speed DSL Modem

1 Answer

Need software to download dlink di-524


Are you trying to install the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online
through the modem.
If your computer is able to go online through the
modem
Then you need to connect the computer to the router
ad the modem to the router.
open the set up page of the router and change the
settings of the router according to the ISP.
Click Here for step by step by instructions

Jan 16, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

I have been using my DI-524 for about two years now without problems. I went away on vacation, left my computer and routers running and now when I get home I cannot connect nor see the wireless connection...


When you say your rebooted the modem and router, do you mean you power cycled them both? If you're unfamiliar with power cycling, this the technique:
1) Unplug your main Cable or DSL line from your modem.
2) Unplug the power from the modem.
3) Unplug the power from the router.
4) Wait about 20 seconds.
5) Plug the Cable or DSL line into the modem.
6) Plug the power into the modem.
7) Plug the power into the router.

Make sure that all computers are shut down and completely off. After you have power cycled, reboot the computer(s). If you still do not see the SSID (the name of the network), then someone probably hacked into your router and changed the password. Here's how to overcome that:

1) Unplug the power from the router.
2) Press and hold the Reset button on the router for at least 30 seconds.

3) Plug the power into the router.
4) Open an internet browser (Internet Explorer, Firefox, etc.).
5) Type in the IP address of your router. For this router the IP address should be 192.168.0.1
6) You should be at a login window. The User Name is admin and leave the password blank.
7) You should now be in your router's configuration options. You should enable the highest security possible, then change the default User Name and Password to something secure, with letters and numbers.

My information for you router came from this link:

http://www.myacrobatpdf.com/8429/dlink-wireless-router-dl-524-setup-instructions.html

Jan 13, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

I have hooked my di 524 from my DSL cable modem then hooked the two in line to my computer when I hooked up to the computer I have no connectivity why?


OK, if I understand:
telephone----DSL Modem--di 524--computer.
That is what you are supposed to do.
Has any configuration of these devices ever had any connectivity?
1. Is the DSL modem in "Bridge Mode"? That is the first thing I'd check.
2. Are you using the right wires and ports? There may be a DCE-DTE problem. Be sure you have used the wire that came with the DSL modem to hook it to the internet port on the DI-524.
3. What is the state of all the various lights? Do they show that you have valid connections?
4. Most of these devices can be configured with a browser. When you browse them, what do you see?
5. What is windows telling you?

Jan 09, 2010 | D-Link DI-524/DWL-G630 (di524dwlg630kit)...

1 Answer

I just conected my DI-524 with a new cable modem


The first question is whether your change of service provider really has any connection with your new lack of range. If your new cable modem contains a wireless router, it's possible it is interfering with your old router. You only need one, so in that case you should remove your DLink and configure your wireless cable router to your satisfaction. Otherwise, you may have coincidentally picked up a new source of interference; you may want to change the channel on your DLink router to see if that improves your range. The third possibility is that your DLink radio is going sour with age -- it happens -- and may simply need replacement.

Nov 25, 2009 | D-Link AirPlus DI-524 Wireless Router

2 Answers

D-Link DI-524 is not communicating with modem


Checklist:
* Is DHCP configured correctly?
* Connect your server and laptop to a switch (not directly with the cable)
* Can they ping each other?
* Check that the firewall is configured (or switched off if you have another FW in place)
* Default gateway should be your router, not the computers (until you have configured RRAS for example)

Here you can find more information about how to configure various roles in 2008: http://technet.microsoft.com/en-us/windowsserver/2008/default.aspx

Sep 07, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Cant connect my laptop wirelessly...


Try to reconfigure your wireless network on your DI-524.

To access the configuration page of your router by Default type in on the address bar 192.168.0.1. On the login page by default the Username is admin and leave the Password blank.

If inside the the configuration page of the router

>Click Home
> Click on WIRELESS located on the left side and you will have the wireless setting of your network
> Change the wireless network name
> Under security choose either WEP or WPA -PSK for this type of router.
> Type in your new network key (also know as Passphrase of Key1).

For WEP use 0 to 9 Number or A to F character and it should be exactly 10 characters.
For WPA-PSK you can use alpha numeric from 0 to 9 and from A to Z. The minimun character would be 8.

> Click on apply
> Click on continue.
Try accessing your wireless network first using your wireless computer. If you are connected to your wireless network try connecting to the Internet.

Jan 27, 2009 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Using a ppoe connection to a DI-524 is it necessary to put a modem in line?


DSL connection:

Computer -> Router(Dlink) -> DSL Modem -> Telephone wall jack/outlet

OR

Computer -> DSL Modem -> Telephone wall jack/outlet

PPPOE = using a username/password combination to authenticate the connection to the ISP.

Nov 04, 2008 | Computers & Internet

1 Answer

Problem regarding firewell


If it is a brand new unit, the default confiration should work for most Cable and DSL providers. If you use DSL and need to setup a PPPoE login and password, you just need to point your browser to http://1292.168.1.1 or http://192.168.0.1 this would all depend on the make and model of your router.

You can also reference the manufactorer's support page to find the owners manual and resetting and confiruation help. The owners manual will also discuss the firewall, port forwarding, universal plug and play (UPnP), and more.

Linksys: http://www.linksys.com/
D-Link: http://www.dlink.com/
Netgear: http://www.netgear.com/
Belkin: http://www.belkin.com/
Cisco: http://www.cisco.com/

For a D-Link AirPlus DI-524, look at the bottom of your router and locate the revision. Then visit http://support.dlink.com/downloads/ and select DI then 524 and choose the revision. That website will show pictures and show you where to find the revision. From there you can download the manual.

With the question being vague, all you need to set it up is a cable or dsl modem with an ethernet cable running to the WAN port of the router. From there, you need another ethernet cable running to another computer OR if it wireless, connect to the wireless SSID (network name). You may need to configure the router for the SSID.

Hope this helps!

Oct 17, 2008 | D-Link AirPlus DI-524 Wireless Router

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

1,112 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...