Question about D-Link RangeBooster G WBR-2310 Wireless Router (WBR2310)

1 Answer

Win7 & vista keeps losing connection with WBR-2310 router

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 7,733 Answers

Signal strength drop or fluctuation are common causes of RF interference.

Try these basic troubleshooting steps:

• Change the channel on your access point or wireless router.
• Change the location of your wireless products. Subtle changes (2-3 feet) can make a big difference. Do not put the access point or wireless router in a cabinet or enclosure.
• 2.4GHz phones, X-10, and bluetooth devices will interfere with your wireless network. Change the location of the base for your phone, or downgrade to 900Mhz phones, or upgrade to 5.8GHz phones.
• The wireless signal will degrade (or die completely) when going through brick (fireplace), metal (file cabinet), steel, lead, mirrors, water (fish tank), large appliances, glass, etc.

If your wireless connection is only dropping during large file transfers or when a large number of wireless clients are connecting, change the preamble on all wireless devices to short.

Posted on Nov 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my d-link 2310 wbr you can see it's working but no signal for the wireless


There are Old computers cant conect to the higher frequencies of the new routers so if you have tested the router on a newer computer and its working i suggest you either:

1. connect by cable.
2. buy a new network card.
3. buy a new computer.

(Also the antenna can be lose or be broken just screw it lose and check.)

Aug 23, 2011 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Have dlink router 1310 when switched over to jumpstart no longer usable


There are multiple versions of both of your routers, you can click on your version and try there tech info from there. If you have no luck, just post the right versions here and I'll see what I can do for you.

.............................................................................................................

There are multiple revisions of the WBR-1310, each with revision specific drivers, firmware, installation guides, and other resources.



There are multiple revisions of the WBR-2310, each with revision specific drivers, firmware, installation guides, and other resources.

Go to there support page and click on your model.

http://www.dlink.com/products/default.aspx?pid=WBR-2310&tab=3

Dec 22, 2010 | D-Link RangeBooster G WBR-2310 Wireless...

2 Answers

I keep losing my network connection with my D-link WBR 2310


Try upgrading the Routers firmware settings, before you do that make sure that you take down the settings , as you will have to resetup your network .

Feb 04, 2010 | Computers & Internet

1 Answer

Windows 7 not connecting with wbr-2310


You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.

Click here for step by step instructions

Jan 18, 2010 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Wbr-2310 wireless stops resonding randomly.


unplug for 10 seconds, plug back in. These units to tend to get a stat build up charge

Nov 08, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

2 Answers

How to set up vonage my wbr-2310 router and 2wire ATnT modem


2wire routers will only work with another device (router) if you will set it up to bridge mode. you need to go to the ip address of 2wire and check the box to enable routing.

Mar 25, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Installation problem of D-link wbr- 2310 wireless router


plug everything in first and just run the router, that's what i did and then set up the disk later
you dont really need it personally

Feb 25, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

5 Answers

D-link WBR-2310 has serious drop out problems


I'm pretty sure that downgrading the firmware to 1.0.3 will work. I had been running at this level for quite some time and for some reason I decided to upgrade to the latest version which started the problems for me. I am downgrading to this now and I expect better results. All of the firmware versions are available at http://www.dlink.com/products/support.asp?pid=470&sec=0. You pick the right hardware revision. PLEASE NOTE: Save off/remember your settings as when you change the firmware it resets all of them back to system defaults.

Dec 12, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

Not finding what you are looking for?
D-Link RangeBooster G  WBR-2310 Wireless Router (WBR2310) Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...