Question about Garmin nuvi 1350 Car GPS Receiver

2 Answers

Garmin Nuvi 1350 - will not power on unless I hold power button down for the 10 second reset. At this point, the device powers on until it reaches the "loading maps" point and then shuts down.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My nuvi 1350 will let me enter an address...to a certain point. then it just doesn't let me finish the address. I can use the eraser to erase what I've already entered and try again and it gets so far and that's it. I've reset it and it did no good. The help screen told me to shut it off, then hold the power button for 30 seconds til the calibration screen comes on. It doesn't ever show me a calibration screen. It just starts loading the maps again. So far, nothing has worked. Any suggestions?

Posted on Jul 01, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Garmin Master
  • 587 Answers

If your device is currently experiencing the following symptoms it may need to come in for service/repair:

  • The device powers on and freezes at the Garmin logo with no trademark or copywrite info displayed on the device which normally shows up below the logo. The device will not display the Main Menu and will not go into Mass Storage Mode.
  • The device powers on and freezes at the Garmin logo and then flashes a white screen briefly. The device then begins a loop of showing the Garmin logo and then flashes the white screen over and over again. The device will not display the Main Menu and will not go into Mass Storage Mode.
  • The device powers on and then freezes or shuts down when displaying the Loading Maps screen.
For service/repair of a device due to the three symptoms listed above please select "No - I would like to submit a follow up email" below this article. You will be taken to an email form that you can submit to obtain a Return Material Authorization number.
Please note: It is important to completely fill out the form with as much information as possible including:
  • Market Name: On the Road
  • Serial Number (listed on the bottom of the device)
  • Question Type: Repair Information
  • Provide a short description of your problem or question: nuvi frozen on Garmin Logo
  • Full Name
  • Contact Phone Number
  • Shipping Address

Posted on Nov 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It is working ok but the screen is too bright, without adjust Is it a hardware or software problem? thanks


You should be able to adjust it using Tools - Brightness. If you can't it is more likely a software glitch, as long as all the other touch controls on the screen work.

You can update the software here.

http://www8.garmin.com/support/collection.jsp?product=010-00782-20

You can also do two types of reset.

How to Reset a Garmin 1350 by Kefa Olang, Demand Media Whether you're on a local or national business trip, a Garmin Nuvi 1350 GPS can help you find your way around. However, if the device is not functioning as expected, performing a reset is a troubleshooting step that can solve common problems. A soft reset reboots the GPS's hardware without deleting saved data, but a master reset clears saved data and settings to restore the device to the factory state.
Step 1 Press and hold the "Power" button for a few seconds to reset your Garmin Nuvi 1350 if it's not performing as expected. This soft reset reboots the device's hardware without deleting saved files.
Step 2 Turn off the Garmin Nuvi 1350 if you're still experiencing problems, and then disconnect it from a power outlet, if it's connected to one.



Step 2
Touch and hold the lower-right corner of the screen while powering on the device. Release the power button when the screen turns on, but keep pressing down on the screen. Step 4 Touch "Yes" when the "Do you really want to erase all user data?" message appears on the screen. If the text is in another language other than English, touch the button on the right to confirm your selection.
Step 5 Wait for the GPS to reset automatically, and then follow the on-screen guided prompts to reconfigure it.

Jan 15, 2016 | Garmin nuvi 1350 Car GPS Receiver

1 Answer

Garmin nuvi 1350 showing numbers not addresses in favorites


Try pressing and HOLDING the power button for up to 15 seconds (or until it powers up - whichever happens first). This is a "hard reset" and should be done whenever the GPS stops acting as expected / locks up / won't turn on / etc..

Nov 18, 2011 | Garmin nuvi 1300 Car GPS Receiver

1 Answer

How to reset Garmin nuvi 1350


You can rest your Garmin by pressing and holding the power button for 10 seconds.

Regards

Sep 13, 2011 | Garmin nuvi 1350 Car GPS Receiver

1 Answer

Flashing garmin, then goes flash white. wont come on


Hello,

Try doing a reset on the nuvi by pressing and holding the power button on for at least 10 seconds.
You could also try running the Garmin WebUpdater.
Download and Install WebUpdater.

Sep 09, 2011 | Garmin nuvi 1350 Car GPS Receiver

1 Answer

Hi, I bought a Garmin nuvi 1350 early this year. Recently I noticed that it stops at the Garmin page, on powering it. It does not get past this page. how can this be resolved? Chidos


Hello,

Try doing a reset on the nuvi by pressing and holding the power button on for at least 10 seconds.
You could also try running the Garmin WebUpdater.
Download and Install WebUpdater.

If the problem cannot be resolved, it may be necessary to return the unit to Garmin to claim for warranty.

Sep 07, 2011 | Garmin nuvi 1350lmt GPS Receiver

1 Answer

When turn the Garmin on it gets the the screen that says Garmin and shuts off


Hello,

Doing a soft reset on the nuvi will usually get the nuvi up and running.
If there is a reset button on the bottom, press and hold it until the nuvi powers back on. If it does not have the reset button on the bottom, slide and hold the power switch to the left for at least 10 seconds.
Also running the Garmin WebUpdater and reloading the latest update will resolve most issues.
Download and Install WebUpdater.

Aug 22, 2011 | Garmin nuvi 205W GPS Receiver

1 Answer

Garmin starts loading maps, then screen goes blank


First do the master reset -Hold down finger in lower right corner of screen and press switch on button. Hold still until asking of erasing all private data appears. FAST click on YES.

If it doesnt work:
From www.garmin.com -cllick on SUPPORT -> SOFTWARE
Get webupdater and install it. Run it and you'll find button "Find device". Of course you can't because it does restart all the time.

Hold down finger in UPPER LEFT corner of screen and press switch on button. Hold still for about 10 seconds (GARMIN appears and nothing more) and fast connect the USB.
HOLD switch until icon of connected computer appears on the screen. After then device stops resetting.

Webupdater can find your device, and now you can put a new firmware by doing step by step instructions from webupdater.

wildadam

Jun 19, 2010 | Garmin nuvi 1350 Car GPS Receiver

1 Answer

My garmin 1350 stopped working while we were on a trip. We got it at Christmas. I just plugged it into the computer and it says garmin with a blue triangle above the n and has a picture of a garmin plugged...


Have you tried resetting the unit, by holding the power button for 10-15 seconds. I had a similar problem, and it actually required two steps to fix it. Simply holding the power button for 10-15 seconds would restart the unit, but it would shut down again during the "Loading Maps." part of the boot process.
So, do this. Hold the power button for 10-15 seconds until it appears to begin booting. See if that takes care of it. If it still doesn't work, plug it into your PC and let it get to the state you described. Then unplug it from the PC, and see if it reboots on its own. If it still isn't working, then hold the power button again for 10-15 seconds.
This worked for me.

Apr 16, 2010 | Garmin nuvi 1350 Car GPS Receiver

Not finding what you are looking for?
Garmin nuvi 1350 Car GPS Receiver Logo

658 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

TO Lady

Level 3 Expert

638 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...