I just got optimum online and I wanted to use my FriendlyNet FH105T5 hub to network the internet to my Mac (OS 10.4.11), my Pc( Windows 7), and my xbox- latest software), at best I've only been able to get 1 device at a time to work with the internet. Right now I'm using my PC. What can I do to get the internet to all of these devices?

Manufacturer's site for this product:

http://www.dlink.ca/products/?pid=DUB-H7

Click on the Support Resources tab.

Click on Quick Install Guides

Your going to find that only Win98, WinME, Win2K, WinXP, Mac OS are currently supported.

Suggets tou write to D-Link to express your need: http://www.dlink.ca/contactus/feedback/

You cannot install Windows on a Macintosh with a PowerPC processor.

i would suggest a USB transfer cable

here is a link to a good one

CLICK HERE

I have the same problem. This is what Tripp Lite told me: "We have tested the existing drivers for the US-4A on both Windows 7 and Mac OS 10.6.2. Neither Windows7 nor Mac OS 10.6.2 functioned with the USB server products (US-4A and U2S-2A) while utilizing current drivers. I suspect that this is due to the fact that both OS' appear to have undertaken a major overhaul over their prior counterparts (XP, Vista, 10.5.X). In order for functionality to exist between the operating systems (in this case Win 7 and Mac OS 10.6.X) new drivers would need to be released. At this point, there is no plan to move forward with drivers to accommodate these operating systems."

I told them I was not impressed and that this lack of support would affect any future purchases of thier products.

That deal is OK, but if you want a high end gaming machine you need at least 4gb RAM

Download the mac drivers for your switch, you windows machine have the drivers. For some reasons it nesds the mac drivers.

here's the compatibility requirements:

Compatibility PC with Intel® Pentium® processor; Windows 98 SE, 2000, ME or XP;
Mac PowerPC processor; OS 8.6-9.x, 10.X and later

http://www.dynexproducts.com/pc-357-2-dynex-7-port-usb-20-hub.aspx

you might want to update your drivers to the latest version
http://www.dynexproducts.com/t-drivers.aspx

hello,

The media is compatible in the following OS:

PC with Intel® Pentium® processor; Windows 98 SE, 2000, ME or XP;
Mac PowerPC processor; OS 8.6-9.x, 10.X and later


So there is no need to install the driver;
for more info about the product is here:
http://www.dynexproducts.com/pc-357-2-dynex-7-port-usb-20-hub.aspx

best melnavz,

PS:
pls do not rate me if my solution not solve the issue and you need more further information. but if is invaluable solution rate me fixya.

Hi dj,
That hub doesn't require any drivers. You can get the manual here. Second link down, http://www.google.com/search?q=+FriendlyNET+FH10T5+&hl=en&rls=com.microsoft:en-us&start=10&sa=N
A hub just shares connections between computers. Don't try using it as router.
Good Luck,

Sounds like you may need what is called a "Crossover Cable' connecting your router to your hub, or if either device has an uplink port, use it on one device to connect to normal port on other device. Here are instructions for making your own cables: http://www.lanshack.com/make-cat5E.aspx