CONTrols of Welbilt bread machine do not respond and change settings
When I plug my machine in the display window is not blank as it should be. None of the controls will allow me to switch any settings. It is on 4:00, wheat, 2 lb, and medium browning. When pushing any of the buttons nothing changes. I am presently making a loaf to see if it will reset itself when finished, but in the meantime I am requesting your help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
See if you can match your blade to the ones on the linked page. There are a frew places that have used paddles on line but would rather have you look at new stocks vs old stocks first. I realize that none of the paddle descriptions state specifically they are for the ABM6200 Model. The stem sizes are all the same so you should be able to find a correctly configured paddle. If you have the angled upright paddle you may have to look at breadman paddles to find a replacement.
when the bread maker is first pluged in it "looks" for its temp sensor if its does not see it it will not "boot"up and the display is blank . first make sure the outlet is working then if your handy remove the cover on the breadmaker and make sure everthing is plug into the control board if it is you out of luck , no parts like that made ... note: breadmakers are a pain to take apart and put back together with lotts of sharp parts , there not realy made to repair so "BE CAREFULL"