Question about Magellan RoadMate 6000T Bluetooth GPS Receiver

1 Answer

I have my GPS pluged in and the little red indacater light is on. but the unit will not turn on it has been stored for about 6 months. does it have to be pluged in for a few hours before i can use it thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,111 Answers

Hi buddyd56

press and hold the power button for up to 15 seconds...the 6000T 3000T and the 3050 all require you to hold the power button for up to 15 second if its in the off position or the battery is dead.. most all other magellan gps will start within 7 seconds if the battery is totally drain or its in the off position.


let me know if that doesnt wok, but it works if there
is no damage to the gps like a bad screen ect


good luck

bill

Posted on Nov 13, 2010

Testimonial: "THANKS VERY GOOD THE PROBLEM WAS I WAS PUSHING THE WRONG BUTTON STUPID ME "

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It works intermittenly


3) The LED turns on or flashes red during initial boot up :
When the temperature inside the car is too high or too low, the red LED flashes. In this case,
follow the steps below.
Turn the product power off and ventilate the car to return to normal ambient temperature.
Turn the power on after a little while and observe the LED color.
If the red LED still flashes under normal temperature, contact customer service.
Ref: Plenio VXA3000 Users Manual Pg 5/6 1-4 Troubleshooting
DVSSynchrome_VXA-3000_UserManual.pdf
Download Files At MS Skydrive Email jeffreydrescher@Bellsouth.net For
Login and Password

Dec 23, 2013 | Digital Video Systems Plenio VXA-3000 GPS...

1 Answer

Sonocaddie v100 won't turn on....


Looking directly at the unit from the front, hold the left side button down for several seconds. The unit will turn on and if not, then the unit is defective.

May 23, 2010 | Sonostar Sonocaddie V100 Handheld GPS...

1 Answer

GO 720 GPS Receiver: Haven't used my 720 for 6 months, have had it plug...


It will do that, diconnect your unit and try switching it on, have you downloaded tomtom home 2 to your computer? as you need this to manage your unit.

May 06, 2010 | Tomtom GO 720 GPS Receiver

1 Answer

TomTom GPS navigation system will not turn on. Had it for only 9 months.


There is a RESET button on unit somewhere,older tomtoms had it on bottom of unit. Have you tried to reset unit? If this do not work, is green light on, when you connect to charger?
If yes then it will be probably GLD-green light of death, take it to the store, where you bought it and they will repair it for free, it is common problem, just type green light of death tomtom to Google and you will see you are not only the one.

Peter

Aug 29, 2009 | GPS

1 Answer

Black screen


This problem has happened to me before turn the gps unit over and clean off the gold colored conductors on the bottom take a paper clip and touch the 1st and 4th pins together this resets the unit be sure it is the 1st and 4th pins on the opposite side of the little power connector though.

Jun 26, 2008 | Mitac Mio C320 Car GPS Receiver

1 Answer

No Green Light or Lite Screen


I fixed the problem DAH the sleep switch was on and in order to turn it back on, I had to slide the little switch that is located on top of the unit.

Jun 14, 2008 | Magellan RoadMate 860T GPS Receiver

1 Answer

Power pin fell off inside of Magellan Roadmate 3000T


I managed to solder my connector back in place. The ground trace broke away from the board so I had to install a jumper to ground. I put RTV on the connector to secure it after the repair.
Worked great for a few weeks until it was dropped again and lost power, something else has a broken connection.

Jan 05, 2008 | Magellan RoadMate 3000T GPS Receiver

Not finding what you are looking for?
GPS Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magellan GPS Experts

Jungle Ghost
Jungle Ghost

Level 2 Expert

154 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

Are you a Magellan GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...