Question about Watches

1 Answer

Rado Diastar Hi Waid, I have a similar problem with a Rado. Itook out the stem and can't get it back in. How were you able to solve your problem? Would you send me an e-mail and let me know? Thanks. denvergems@yahoo.com Greg

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Your problem is in setting lever,when the setting lever is jumping the stem cannot get back and lock,you better unscrew the complete barrel drum bridge plate take it out ,and the winding pinion is expose,take the winding gear and the setting lever is expose then arrange the alignment,align the winding pinion to the setting lever,alignment is ok.back bridge plate and screw,,make some winding of the crown,let see rachet wheel can turn transmission wheel of complete barrel drum,if can then checked the stem if already lock.,if lock already the job is done,...email if you some question regarding a watch ;lacarontito@yahoo.com

Posted on Jun 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where to get a new. Watch strap


You can get Watch strap and everything of watch from The Prime Luxury Boutique. It is an authorized luxury watch retailer. http://theprimewatches.com/

Aug 09, 2014 | Rado Diastar Anatom Jubile watch

1 Answer

What's the price of this watch rado diastar


hi the watch i found is pretty much identical. only thing is anchor is at different angle. points straight down not to the right and its a females watch. price is bout 506 pounds or 895 dollars. hope this is useful to u.

Jan 21, 2013 | Watches

1 Answer

Hi, The first link on my Rado Strap has chipped. Can I get the link replaced without having to replace the whole strap.


Just go to your local service center found on www.rado.com and they will replace the link for you for about $25.

Jun 09, 2011 | Rado DiaStar watch #R20282192 Watch for...

2 Answers

How do i set time and date of my rado wristewhatch?


Hi - I have a Rado Jubilee-Black Face-Lovely Dial
Problem:Time is set with a Key - Back of the watch
I have LOST this Key & need to buy or get one?
Can you please advise - rozilamohamed@yahoo.com
Many Thanks
Ms>Mohamed

Feb 23, 2011 | Rado Diastar Anatom Jubile watch

1 Answer

The release buttons on the clasp of my Rado Jubile wrist watch have lost their spring tension can it be fixed


mcdevito75 here, Best Bet with your Rado watch, Look for a small watch repair shop in your area for adjustment / replacement.

Jun 21, 2010 | Rado Diastar Anatom Jubile watch

1 Answer

Rado watch stopped working


It sound like a fault. Be careful who looks at it though and what they charge - a complete new quartz movement for most watches, even fancy ones like your don't cost as much as £90 so almost all of what you are charged is labour.

Feb 02, 2009 | Rado Diastar Anatom Jubile watch

1 Answer

Rado diastar swiss 196-0364-3


I bought the same watch recently and have the same problem. The hours can be adjusted in the dual time zone by looking up the manual, but the minutes stay put. I can't bring them to blink so that these could be adjusted. Any ideas? I sent a mail to Rado through their website but no answer.

Jan 06, 2009 | Rado Coupole R22531723 Watch

1 Answer

I have a Rado DiaStar watch (with digital display), and the hands are out of synch with the digital display. Is there a way of adjusting the hands independently of the display? or must it be sent back to...


Hears how i do my watch, i have the same watch as you.Just make sure nothing is displayed on the clock face by turning the winder, ie NO digital time, NO daul time, NO alarm, NO stop watch etc, Pull out the winder(crown) and adjust the hands to the time you require by spinning the winder.(Gentley for mins and fast for hours) The digital clock will display wilst doing this, but not change the time.handy if you want to sync both clocks.Push the winder back in at the time to sync and the digital display will go out, then spin the winder again if you want to display the digital features. I hope this helps, please post if it does, Maurice Chevalier- Herts

Nov 01, 2008 | Rado Diastar Anatom Jubile watch

Not finding what you are looking for?
Watches Logo

Related Topics:

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Jimmy Accardi

Level 2 Expert

97 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...