Question about Palm TX Handheld

1 Answer

Hi! I bought a referbished TX from you in January of 2009 (I think). It has been working great. However, the other day when I turned it on, the digitizer wouldn't work. Buttons work, everything else seems to be fine, just cant use the stylus to maneuver around. Can you give me an estimate on repair? Thanks, Ramona Andrews

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Palm Master
  • 4,338 Answers

Disclaimer: I'm just a tech answering you request. I don't know who sold you the TX.

Have you tried to reset the TX?

First, save your data:
then reset:

While holding the Power button, use the tip of the stylus (or a similar object without a sharp tip) to gently press and release the RESET button inside the hole on the back of your device.
The RESET button may be somewhere else on the back of your particular device.
First you'll see a palmOne or Palm logo and a progress bar. Keep holding Power.
Then you'll see a grey circular Palm PowereWhen the warning appears, press Up to confirm the hard reset.
If a language selection screen appears, select the same language you selected for your desktop softwared logo. Now you can release Power.

Then sync it to you PC.

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.

Thanks, Joe

Posted on Nov 12, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I want to know if my mp3 video player still has gurantee

Yup it is still under wurentie sorry I can't spell It should still be under wurentie but if it isnt try getting it fixed they will get it fixed if it is under warntie

Dec 23, 2011 | Audio Players & Recorders

1 Answer

My BTM 630 starts a very anoying noice after I raise the volume up from 13. I believe it has to do with the ventilation. Do you have any idea?

I found this user review that may coincide with your experience...

"When receiving the unit the fan was very loud and the cd player did not work. However, after calling phillips that same day they mailed a new "referbished" unit out with prepaid postage and pickup service for the old unit. The new one works great and sounds great in a smaller room. Sound is very crisp and clear."

Negative Opinion after several replacements:

"worst product ever by adiklaus - November 14, 2009
Pros: The third replacement unit is still not working, Philips send two faulty replacement units. All displayed signs of previous use and did not work. CD player was not working, the same in second unit, the third unit had no working display .
Cons: For the short time it worked the unit was adequate in sound quality but unfortunately this was short lived.
Review: I certainly dislike a product that does not work and is backed up by second hand unit which also do not work. Beware of this Unit"

Mar 01, 2011 | Philips BTM630 Shelf System

1 Answer

I bought an Elliptical on january 7 2009. It not

This is normal stuff with the cheaper stuff. You need to the lube the joint all the time to get rid of the noise. Contact you local walmart they will get you in touch with their service provider. Best of luck


Oct 08, 2009 | Exercise & Fitness

1 Answer

Hi my name is Maribel

It's possible that the screen itself went defective or the controller board for the screen. It's best to use the warranty at this point because the replacement board or screen panel maybe somewhat expensive. Being that it's only 8 month old, manufacture warranty shouldn't be an issue.

Aug 18, 2009 | Sony Televison & Video

3 Answers

Acer aspire one not booting

ohh no its an ACER! it will never aspire to be of use now

Jun 20, 2009 | Acer Aspire One PC Notebook

2 Answers

April 2009: I Did a stupid thing! I bought a New

Hi there, First thing you want to do is oil all the spots as noted in your manual. Turn the hand wheel slowly as to get the oil in all the nooks and crannies. Get it a day and then re-oil it again. I think it just needs a bit of tlc and patience to get it working.

Apr 13, 2009 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Starview box

NTL UK (54 01) 29th January 2009:

KEY 00 = 2E E9 B1 3F F7 F8 53 B2

KEY 01 = 9F 09 00 66 3B D2 43 8B

EX C&W (5c 01) 29th January 2009:

KEY 00 = 7D 9B 0E 8B 69 3F E7 34

KEY 01 = 83 61 00 3A FD F3 DC 0A

Jan 29, 2009 | StarView SV211K 2-port KVM...

1 Answer

Finding a compatible remote

Hi there, this may take a little research to find, back to you real soon

May 11, 2008 | Yamaha TX-497 2 Channels Tuner

1 Answer

Zone 2 with Onkio TX-SR605



All you have to do is to do a factory reset on everything, but I thing mostly on your 605. I think what had happened is after I set everything up for the first time, it worked great. As the days when on I started to play with all of the futures the 605 and the TV had to offer. I was turning them on and off to see what everything did. What I think I did was, I turned on something in the 605 that the TV did not know how to cope with. If I had to guess, I think it is the Lip-sink feature (Spelling?) in the 605.

Anyway disconnect everything, look in your manuals of the TV and the 605 to see how to do the factory reset on both. Then turn your TV on. After it does it’s start up for the first time (again), start connecting the 605.

It has been working great for me after I did this. Do not count on help from the people you bought it from or the people who made it. This stuff is so new they do not really know how to fix it.

Please feel free to call me if you need more help. 410-456-1290.


Jan 20, 2008 | Onkyo TX-SR605 Receiver

Not finding what you are looking for?
Palm TX Handheld Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Palm Computers & Internet Experts

Michael Vincent Cruz

Level 3 Expert

868 Answers

Raj Patel

Level 3 Expert

916 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

15604 Answers

Are you a Palm Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides