Question about As Seen On TV Handy Stitch Mechanical Sewing Machine

1 Answer

How do i thread my needle with the singer handy stitch?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 149 Answers

  1. Loosen needle screw & insert needle with shank's flat side facing front of machine. Push needle in all the way, then tighten screw to hold needle in place.
  2. Install a fully wound bobbin by loosening bobbin nut & placing bobbin on top. Re-attach bobbin nut & tighten. If standard thread spool will be used, then attach spool pin to bobbin shaft & place thread spool onto shaft. Attach white spool cap on end of thread spool, then tighten. Bobbin/spool should unwind facing forward toward needle.
  3. Bring end of thread through thread guides & over tension control. Pass end of thread through needle eye, from back to front, & pull it out about two inches.
  4. A spring pushes pressor foot onto fabric that is being sewn, so lift pressor foot & place fabric underneath.
  5. Turn large handwheel on side of machine (handwheel can be turned in either direction) to raise needle arm to its highest position.
  6. Holding the Handy Stitch in place with your right hand, press on power switch & begin sewing. Guide fabric (being sewn) with your left hand.
  7. To end this sewing session, turn off power. Turn handwheel to raise needle to its highest position. Carefully pull out about three inches of thread through needle & snip, then lift pressor foot to remove fabric. Turn fabric over & loop needle threader through last stitch. Place end of thread from underside through eye of needle threader, & pull to loop through. Pull to tighten and snip end of thread.

Posted on Nov 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My machine turns on but it doesn't actually sew. The needle just pokes holes in the fabric and I don't know how to fix it


Is the bobbin full of thread, and is the needle threaded?
These are very inexpensive machines; some will only sew with what is in them when delivered, then you buy another. :-(

Mar 15, 2015 | Singer Handy Stitch Hand Held Portable...

1 Answer

What is the difference in the length of the needle on a "handy stitch" as opposed to the "stitch sew quick machine?


Check your manual for the "System" of needle
a normal sewing machine needle has a "System" or dimension
called 15x1 or 705 H. That indicates the length, the circumference
etc. If the needle you received with the machine is the same length as the above system then you should be ok. Also most often the needle package for most machines will be labeled "Universal"

Aug 04, 2014 | Singer Handy Stitch Hand Held Portable...

1 Answer

Singer 27


What kind of thread are you using. The most often problem today is that the thread is too thick for the size of needle. Try using a Metallica size 90 or a top stitching needle size 90
if the thread is a cotton type or a quilting thread it is often to thick to travel easily through the eye of a needle quickly to form a good stitch.

Aug 03, 2014 | Singer Sewing Machines

2 Answers

Stitch


Mine is doing the same thing. It's pulling the thread up from the bobbin and making a huge knot. Any suggestions. I've done all the above checks. Brand new needle, tension is on embroidery, threaded properly and no lint in bobbin compartment.

Jul 28, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Singer 301A needle breaks


do you have a book, refer to threading. This machine threads differently than most, threads like a 221 featherweight. Needle goes in backwards, and threads backwards. in wrong and you can have problems, also threading can cause your problem if you have missed tension or a thread guide. great little machine

Jun 01, 2009 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Stitch is uneven, not straight, and tension off on top and bottom


on my industrial machine this was caused by the wrong size needle. the length was off just a fraction. just an idea, in case you bought generic needles or something.

Nov 24, 2008 | Singer 3116 Simple

1 Answer

Singer overlocker


Most likely is the left looper thread is trapping the needle threads.

Remove the threads and start over in this sequence....

Left looper - right looper - left needle - right needle.

If you thread the needles before the lower looper, the needle thread wrapped over the looper will be under the looper thread and will never be free to form a stitch, so the threading sequence is critical.

Jun 08, 2008 | Sewing Machines

Not finding what you are looking for?
As Seen On TV Handy Stitch Mechanical Sewing Machine Logo

454 people viewed this question

Ask a Question

Usually answered in minutes!

Top As Seen On TV Sewing Machines Experts

Harjeet Singh

Level 2 Expert

103 Answers

R.A. Ellis
R.A. Ellis

Level 3 Expert

8899 Answers

CrisO

Level 2 Expert

242 Answers

Are you an As Seen On TV Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...