Question about Black & Decker String Trimmer Cordless 12" 18V

Open Question

Hi, just got a new spool and line for my Black and Decker GL550 strimmer and can't find the instructions anywhere on how to fit it, TIA, John

Posted by on

6 Suggested Answers

  • 1 Answer

SOURCE: how can i repace the

Instructions can be found at: https://www.2helpu.com/PDMSDocuments/EU/Docs//docpdf/gl550_uk.pdf.

If the line keeps getting too long, it's because swivel 14 in diagram 7 was in the wrong position when you inserted the spool - just move it to the ouside position, re-insert the spool and away you go. Frankie.

Posted on Jun 11, 2008

  • 4 Answers

SOURCE: got a Black & Decker GL301 strimmer but have lost instruction manual. dont know how to fit new cutting wire

Go to Homebase, B&Q, Ebay or your local hardware shop and buy a new spool, ALM part number BD032.

Posted on Jun 01, 2009

#1 Taper
  • 1040 Answers

SOURCE: threading line on black & decker GL301 strimmer

Do you mean that the string keeps feeding as you try to operate the trimmer?

If so, you are winding the string on the spool the wrong way. Put the string on the spool in a clockwise direction. This should do it.

Jim

Posted on Jun 21, 2009

thydzik
  • 86 Answers

SOURCE: How do you fit a new spool?

refer to here for generic instructions of replacing the wire/string on a trimmer.

http://wiki.answers.com/Q/How_do_you_replace_a_weed_eater_trimmer_line

have a read through, it may help assist you.

Posted on Jul 21, 2009

  • 133 Answers

SOURCE: i have a black & decker gt701 strimmer. i

Remove cup from bottom of unit by depressing 2 detent tabs and pulling away from unit.
Replace empty spool with new full one or wind on aftermarket string. Wind in direction of
arrow on spool. Make sure spool is seated on rachet firmly.

Posted on Apr 21, 2010

budgie140
  • 501 Answers

SOURCE: How do i fit the spool on my black and decker

guide the two strings thru the holes in the outer ring,then push it down into place,and screw knob on

Posted on Jul 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, i have a b&d gl430 strimmer. lever that links to line spool is broken, where can i find another please ?


Try Tulsa Engine Warehouse. TEW.com those guys are very helpful., Can also try Pat's Part Supply. All do business on-line.

Apr 06, 2014 | Black & Decker Lawn Trimmers & Edgers

1 Answer

How do i fit the spool on my black and decker strimmer model no GL535


guide the two strings thru the holes in the outer ring,then push it down into place,and screw knob on

Jun 21, 2010 | Black & Decker String Trimmer Cordless 12"...

1 Answer

I have a black & decker gt701 strimmer. i recently replaced the line on the spool but now it wont feed, ??


Remove cup from bottom of unit by depressing 2 detent tabs and pulling away from unit.
Replace empty spool with new full one or wind on aftermarket string. Wind in direction of
arrow on spool. Make sure spool is seated on rachet firmly.

Apr 16, 2010 | Black & Decker Lawn Trimmers & Edgers

1 Answer

How do i replace strimmer wire on a black and decker 315


how do i replace a spool and line on a black and decker GL20 strimmer x

Sep 10, 2009 | Black & Decker Lawn Trimmers & Edgers

1 Answer

How do you fit a new spool?


refer to here for generic instructions of replacing the wire/string on a trimmer.

http://wiki.answers.com/Q/How_do_you_replace_a_weed_eater_trimmer_line

have a read through, it may help assist you.

Jul 21, 2009 | Black & Decker Lawn Trimmers & Edgers

1 Answer

Spool not auto feeding on gl701 and need diagram of how to set it up correctly in strimmer


When putting new line on, it must be wound clockwise onto spool. Make sure to use the correct size line.

Jim

Jul 01, 2009 | Black & Decker Lawn Trimmers & Edgers

1 Answer

Gls 220 auto strimmer


When putting new line on, it must be wound clockwise onto the spool

Jim

Jun 30, 2009 | Black & Decker Lawn Trimmers & Edgers

2 Answers

Threading line on black & decker GL301 strimmer


Do you mean that the string keeps feeding as you try to operate the trimmer?

If so, you are winding the string on the spool the wrong way. Put the string on the spool in a clockwise direction. This should do it.

Jim

Jun 19, 2009 | Black & Decker Lawn Trimmers & Edgers

1 Answer

Got a Black & Decker GL301 strimmer but have lost instruction manual. dont know how to fit new cutting wire


Go to Homebase, B&Q, Ebay or your local hardware shop and buy a new spool, ALM part number BD032.

Jun 01, 2009 | Black & Decker Lawn Trimmers & Edgers

1 Answer

How can i repace the line on a black & decker strimmer gl550


Instructions can be found at: https://www.2helpu.com/PDMSDocuments/EU/Docs//docpdf/gl550_uk.pdf.

If the line keeps getting too long, it's because swivel 14 in diagram 7 was in the wrong position when you inserted the spool - just move it to the ouside position, re-insert the spool and away you go. Frankie.

Apr 20, 2008 | Black & Decker String Trimmer Cordless 12"...

Not finding what you are looking for?
Black & Decker String Trimmer Cordless 12" 18V Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Lawn Trimmers & Edgers Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you a Black & Decker Lawn Trimmer and Edger Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...