Question about NComputing L230 Network Terminal

1 Answer

Dear Mr. , I have VMware server and I create VM on it with WIN XP SP3 and install VSpace in XP, after that when I'm trying to connect NComputing devices with that machine it appears that machine in the configuration Box in NComputing but does not connect and that message appear (Update was canceled because Newer version of Firmware not found), So I go to VSpace and check for the firmware for NComputing device and found 1.02.08 Firmware virsion installed (this is the last Visrsion). I donot know what to do ?? waiting for your reply ASAP. With regards...

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hello Rana,
Please recheck which model number you are working with, since what you are describing sounds like the L300 and not the L230. If it is the L300, then you may have initiated a firmware update from the console or from within the device. We'd be happy to walk you through this -- please contact us online or by phone by going to: http://www.ncomputing.com/techsupport

Posted on Nov 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Terminal server yet not reddy plz retry atteempt a bit whar the solution?


Make sure you have the latest vSpace software, v4.x for W2K3/XP and v6.x for Win7/W2K8r2. Once vSpace is installed, make sure you have registered the software and ENABLED Hardware Activation in the Background.

Jul 08, 2011 | NComputing L230 Network Terminal

1 Answer

We are using L230 device and when we try to connect to the server the following error message pops up" terminal server is not at ready. please try a bit later". But when i use the same device to...


There were some issues with single core vs. multi-core processors with earlier versions of vSpace. Perhaps the two server/hosts you're using as a reference point are different in that one is single core, the other is multi-core. Regardless, my recommendation is to uninstall the vSpace software, reboot, run their cleanup utility, and reinstall the latest version. Before reinstalling, make SURE that you have applied any Service Packs and ALL of the current MS updates. Additionally, browse Device Manager and make sure there are NO missing or conflicting drivers. Do NOT, I repeat, do NOT install from the provided CD. As of this posting date, the cleanup utility is available here: nc-eng.com/tools/ncuninstall. The most up to date vSapce for L230 is on the NComputing download site. If you hit this post later and the supplied URLs are not valid call NComputing TS at 888-365-1210. Lastly do NOT forget to register the vSpace software.

Jun 23, 2011 | NComputing L230 Network Terminal

1 Answer

Cannot connect server ...... client PC diplay this message


Can you PING the L230 device from the server? In other words, are you confident there is a clear IP path from server to device? Also, if you're running on XP, turn off the XP firewall as a test. If that works and you still want to run with the firewall on, then you'll need to specify specific ports to be opened up on your firewall or your domain's firewall policy. Those ports, as listed from NComputing's website are:
Port Exceptions
  • For L-series device connection
    • TCP: 27605, 27615, 3581, 3597, 3645, 3646
    • UDP: 1027, 1283, 3581
  • For vSpace registration
    • TCP Port 3630
    • Point to:
      • register.ncomputing.com
      • or 85.214.107.229
  • For vSpace Update
    • TCP Ports 20 & 21
    • Point to:
      • 70.182.176.102
      • or 81.169.173.128
      • or 81.169.173.128

Jun 12, 2011 | NComputing L230 Network Terminal

1 Answer

Ncomputing cannot connect to the win server 2008


Please specify which Server 2K8 version you're using. If it's W2K8r1, and you had installed SP1 as of this posting date, their software didn't support SP1. They recently updated vSpace to support that so please either remove SP1 and retest, or update your vSpace software to the current version and you should be all set. Additionally, if you're server/host is a domain member, make sure it's a domain member when you install vSapce as the installation will manage the firewall port settings for you and many times those firewall port settings change when a system as added to the domain membership.

May 25, 2011 | NComputing L230 Network Terminal

1 Answer

First l230 connect to vspace ok,then i installed safe360 , then l230 report "terminal server - yet not ready. please, retry ..."


What is Safe360, an AntiVirus or Firewall software? If so, the program may have inadvertently blocked port access to the kernel which vSpace needs access to for user sessions. Below are the port exceptions for firewall configurations and file exceptions for Antivirus configurations. Current as of this post.
  • Port Exceptions
    • For L-series device connection
      • TCP: 27605, 27615, 3581, 3597, 3645, 3646
      • UDP: 1027, 1283, 3581
    • For vSpace registration
      • TCP Port 3630
      • Point to:
        • register.ncomputing.com
        • or 85.214.107.229
    • For vSpace Update
      • TCP Ports 20 & 21
      • Point to:
        • 70.182.176.102
        • or 81.169.173.128
        • or 81.169.173.128
  • File Access Exceptions
    • For vSpace functionality
      • C:\Windows\system32\KMServc.exe
      • C:\Program Files\Common Files\NComputer\Bootsrv.exe
    • For vSpace tray icon
      • C:\Program Files\NComputing vSpace\KmMsg.exe
    • For vSpace Registration
      • C:\Program Files\NComputing vSpace\KmRegWiz.exe
    • For vSpace Update
      • C:\Program Files\NComputing vSpace\KmUpdate.exe

May 01, 2011 | NComputing L230 Network Terminal

1 Answer

X300 internal error code 0x2025-0x08X-0 means


My recommendation is to uninstall the vSpace software, reboot, run their cleanup utility, and reinstall the latest version. Before reinstalling, make SURE that you have applied XP SP3 and ALL of the current MS updates. Additionally, browse Device Manager and make sure there are NO missing or conflicting drivers. Lastly, if Intel Active Management Technology is installed, disable it. This will be listed in the ports section of Device Manager as either IAMT or SOL/COM3. Do NOT, I repeat, do NOT install from the provided CD. As of this posting date, the cleanup utility is available here: nc-eng.com/tools/ncuninstall. The most up to date vSapce for X300 on XP is at: ncomputing.com/download/x300.zip. If you hit this post later and the supplied URLs are not valid call NComputing TS at 888-365-1210. Lastly do NOT forget to register the vSpace software and related XD1 boxes. Do NOT install from the provided CD, rather download the latest software from the link provided and install straight from that resulting download.

Apr 18, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

Terminal server - yet not ready, please, retry attempt a bit later, with L230 and vista 32 bits


Uninstall any current version of vSpace. Reboot. Makesure you have no missing or conflicting device drivers inside of devicemanager. Then run the NComputing cleanup utility located here:www.nc-eng.com/tools/ncuninstall.exe. Download current version for yourOS from the NComputing download site, install vSpace and reboot and register. Do NOT, I repeat, do NOT install from theprovided CD and upgrade. Simply install straight from the downloadfile I provided in the link. Lastly makeSURE you REGISTER vSpace. Be sure toenable the background hardware activation option. This is available on the last screen of theregistration or in the NComputing System console, under System Settings.

Mar 21, 2011 | NComputing L230 Network Terminal

2 Answers

L230 Network Terminal: terminal server yet not ready please retry attempt...


This problem appear after u updated windows. U must update vspace with vSpace_4.05.002.03_for_Windows_L-Series. Register required and free on ncomputing sites, download and try...Itried it and solved this problem

May 17, 2010 | NComputing L230 Network Terminal

1 Answer

Which VMware product for dual VISTA and XP Operating systems?


for vmware server u need licenses for installing and its not meant for a novice user also. the easiest way to do virtualisation is sun's VMBOX, which is relatively light than the others wich support vista also. here is link try it and feel it

http://www.virtualbox.org/wiki/Downloads

Jul 23, 2009 | Computers & Internet

Not finding what you are looking for?
NComputing L230 Network Terminal Logo

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top NComputing Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tom Chichester

Level 3 Expert

36408 Answers

Dan Shibata
Dan Shibata

Level 3 Expert

542 Answers

Are you a NComputing Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...