Question about Logitech QuickCam Pro 9000 Web Cam

2 Answers

I'll insert the disk and try to install the program but it just comes up with a white screen, blank. i cant click anything; and when i try to exit another window pops up with no words as well, just a white blank screen. i can webcam but i cant install the video effects or anything else. ive tried to clean install it but the same thing keeps happening.

Posted by on

  • Janniejam Nov 11, 2010

    i cant see anything with the installer . its blank. all i see is a pop-up that says "logitech webcam software installation" i can use the webcam on messenger sites i just cant download the effects and all the other stuff.

  • Janniejam Nov 11, 2010

    http://i1029.photobucket.com/albums/y351... heres what it looks like

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Logitech Master
  • 10,322 Answers

1st You download Webcam Driver.
install After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Logitech Camera Drivers for Windows XP Vista Windows 7

Posted on Jan 08, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Copy this site and paste it in your web browser address bar and hit ENTER.

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

From the images, select the webcam and then download your cameras driver.

Then to install and use it on the Web, do this.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web, do this.
Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

Posted on Nov 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to recovery a hp envy dv7


It depends on which operating system you are using. Here are instructions for Windows 7:
  1. Click on Start -> All Programs -> Maintenance.

    Tip: An alternative is to execute from the Run box or a Command Prompt window. If you do that, you can skip to Step 3 below.
  2. Click on the Create a System Repair Disk shortcut.
  3. Choose your optical disk drive from the Drive: drop-down box.
  4. Insert a blank disk in your optical drive.

    Note: An empty CD should be large enough for a System Repair Disk. I created a Windows 7 System Repair Disk on a new Windows 7 32-bit installation and it was only 145MB. If you only have a blank DVD or BD available, that's okay too of course.
  5. Click the Create disk button.

    Windows 7 will now create the System Repair Disk on the blank disk you inserted in the previous step. No special disk burning software is required.
  6. After the System Repair Disk creation is complete, Windows 7 displays a dialog box that you can close by clicking the Close button.
  7. Click the OK button back on the original Create a system repair disk window that's now showing up on your screen.
  8. Label the disk as "Windows 7 System Repair Disk" and keep it someplace safe.

    You can now from this disk to access System Recovery Options, the set of system recovery tools available for the Windows 7.

    Tip: As with a Windows 7 installation disk, you'll need to watch for a for a Press any key to boot from CD or DVD... message on screen, right after your computer turns on or restarts with the System Repair Disk inserted.

Aug 23, 2014 | HP ENVY dv7-7240us 17.3" Notebook PC

1 Answer

BLUE SCREEN


Which Operating System? You'll need a system disk to run the chkdsk command for a Dos Prompt (black screen with white lettering).

Insert the Operating System Disk in the cd drive, reboot from the operating system disk and select the option to Repair. It will search for your operating system and once found you will select it by entering a 1 for windows. Then it will ask for the Administrator's password which in most cases is blank so just press enter. When you see the Dos Prompt simply enter the command: chkdsk /r
Check disk will run well over an hour and you will notice the percentage of completion going from high to low, but that's normal. Let it run to completion then reboot the machine.

If you still have issues, then you'll need to reinstall windows. Try doing a Repair Install which preserves your music, pictures, documents, data and videos.

Windows XP Repair Install:
Insert the Operating System Disc in the cd drive and boot from it.
When the Options come up select the Option to Install Windows (Don't select Repair). It will start loading windows files and at some point it will ask you to accept the License Agreement by hitting F8. On the next screen after hitting F8 it will begin searching your system for an already installed operating system. It should find yours and give you more options to which you want to select the option to Repair. This will preserve everything you have on the system.

In windows vista to get to the dos prompt you will need to use the operating system disk and boot to it. Then get into the Recovery Console and look down at the bottom for the Dos Command Prompt or Repair option.

Mar 22, 2012 | Intel Computers & Internet

1 Answer

Have windows 7 on new computer, installed Adobe Pagemaker which is fine but want to turn files into PDF format, message say's no printer driver installed. Have tried to install but windows will not let...


the printer will need to be installed in compatibility mode....un-install the printer from control panel.
pain in the **** i know, but least you'll know from now on, how to install older programs & drivers in to windows 7....
if your installing from a disk, then put the disk in, then when the auto run box comes up, close it...
open computer instead from the start menu.
right click on the cd drive with the disk in, & select open.
drag & drop the contents of the disk on to your desktop....make a new folder to put it all in, if you need to.
then once it's copied across, right click on the install/application icon.
from the top of the menu click "check compatibility" if you dont see it,click off it & then try right clicking on it again untill you see it.
windows will scan & set itself to the right settings for that program.
then click try recommended settings.....followed by START PROGRAM.
if it all installs ok click next then click YES KEEP THESE SETTING FOR THIS PROGRAM NEXT TIME.
then go to the printers web site & update it with the latest software,thats if windows doesn't do it for you.....TIP:(white flag @ bottom right of screen)
do this with all older software.....windows 7 is **** hot when it comes to running older programs, im using a windows 98 program call photo express on mine...no problem.

GOOD LOOK MATE.

Sep 10, 2011 | Computers & Internet

1 Answer

I have a problem installing my Vimicro USB PC Camera 305 on my Windows XP. I start to install but still doesn't work. I try to uninstall but I cant do that from CONTROL PANEL pls tell me how to do that....


It is a pain.
Try the following. Re-run install, insert CD and it should start to load?

The exception is it should come up and say do you wish to uninstall Blah blah . Click Yes. When finished it will want to restart.

Before restart, remove usb webcam. restart.
Go to my poota/programs/and look for the camera file/ it may have been removed in that no problem/ if file is still there/right click/remove. Restart.
Complete restart/then setup CD Webcam again. Sit with it click Ok when asked even not a recognized prog, still click continue.
After completion. Reinsert usb of webcam! wait till it loads, asking silly Q, continue. till finish.
If sucessful, find it in programs if you didn't click for desktop icon?
Startup screen should show small white screen, couple of Q's it can't do something, ignore. You will end up with blank white/black square.
Click menu at top, click devices, dropdown click your cam name, should then open to a larger screen. If you need to alter things, click options.
All this of course if it loads.

Best of British.

Nov 14, 2009 | Computers & Internet

3 Answers

Trying to use Toshiba "recovery Disk creator"


u need a blank dvd, or tell the program your using regular cd, it will be like four dvd's or like 11 regular disks. in some cases it wont work with either, i have seen it where the program just doesnt know any disk is inserted or blank. if thats the case, update the program or contact toshiba

Sep 01, 2009 | Toshiba Satellite L305-S5907 Laptop

2 Answers

There is a ? and mac os symbol on the screen coming out


when booting immediately after the first chime before the grey screen hold down keys (apple,option,p,r) allow the computer to restart if it still goes to that blank screen restart again and this time hold down only the (option) key or maybe (option,s) depending on model try option key first then select the main start up disk from the menu and click the arrow underneath

Apr 22, 2009 | Apple Power Mac G4 Desktop

2 Answers

Blank screen with blinking folder


This is a sign that the startup disk can't be found.

When you power on the computer, try holding down the "alt" key or "option" key on your keyboard.

Then after a while, it should ask you to select the location of the operating system. Select your macintosh HD. Everything should load as normal.

If this doesn't work, insert the install cd's and hold down "c" instead. This will load the cd with mac os x on it. You can then install the operating system. Please make sure you have backups. Unless the option to simply upgrade or repair your mac pops up, you will loose your files following this method.

Nathan.

Apr 13, 2009 | Apple MacBook 13"White /2.0Ghz Intel Core2...

2 Answers

Macbook Error


It's not finding your operating system. Could be failed hard drive, corrupted registry or a start up disk error. Have you tried starting on the Macbook Pro install disk 1? If not, insert the disk while it's starting up, it and hold down "c" key. When I comes to the start up window, click the right arrow button, proceed to the install window but don't install! Instead select "disk utility" under the pull down menu (upper left hand corner of the screen). Select the hdd in the upper window and click the "repair" button. Repeat the repair again after is finishes. If there is no hdd icon in the upper window, the hdd is probably fried and needs to be replaced. Hope this helps.

Jul 05, 2008 | Apple MacBook 13"White /2.0Ghz Intel Core2...

2 Answers

I have an acer aspire 5315. i want to change my os from vista to xp, is this possible and how can i do it?


http://soulpass.com/2007/11/10/installing-windows-xp-professional-sp2-on-acer-aspire-5315-2153-laptop/


Looks like a nice tut to do it.

Apr 20, 2008 | Computers & Internet

Not finding what you are looking for?
Logitech QuickCam Pro 9000 Web Cam Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2855 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...