Question about Acer Aspire 6920 Notebook PC
follow the diagnosis outlined in this article to check whether the
backlight lamp or the inverter board are the root cause of the problem
If you connect the external monitor & nothing is displayed on it, then this means that both the backlight lamp & the inverter board are fine. The main indicators in these cases are the sound, and the hard drive LED on the laptop case. If the laptop sounds just like it always does for a minute or two after being turned on, it means it's going ahead and booting the operating system, but the video processor or part of the motherboard circuit for video output has failed. If the laptop just sits there and beeps when you turn it on, or if you hear the fan but not the hard drive chuckling with its active LED flashing away, it means the laptop isn't getting as far as trying to boot the operating system. While this could be due to any number of hardware problems, the most common and easiest to
troubleshoot or repair is RAM failure. If your laptop has two RAM modules installed, try booting with just one and then the other in the primary slot. If your laptop only has one RAM module, you might consider buying one online from a site with a good memory selector, like Crucial.com
Posted on Nov 11, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 20, 2010 | Acer Aspire 6920 Notebook PC
Apr 02, 2010 | Acer Aspire 6920 Notebook PC
Nov 09, 2009 | Acer Aspire 6920 Notebook PC
Oct 06, 2009 | Acer Aspire 6920 Notebook PC
Jun 18, 2009 | Acer Aspire 6920 Notebook PC
May 04, 2009 | Acer Aspire 6920 Notebook PC
Apr 18, 2009 | Acer Aspire 6920 Notebook PC
Jan 10, 2009 | Acer Aspire 6920 Notebook PC
168 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: