Question about Cell Phones

1 Answer

I have a Plantronics M2500 bluetooth headset but i cannot connect it to my phone, which is a Samsung D900.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 294 Answers

1. Charge it 4-7hrs 2. When ready, it must be light up either Green or Red when you PRESS IN on the Up/Dn Volume button 3. Press and hold the Answer button (on microphone boom) for 2-3secs, then Push IN and UP on the Up/Down Vol button'Light should flash Red/Green/Red/Green..... 4. Go to Phone, Enable Bluetoth and tell it to FIND new adapter/Devices 5. When it 'finds' M2500, punch in 4-zeroes (0000) and hit enter/Dial and it should connect 6. When connected, the 2500 will flash BLUE Thats it! If it will not charge up (light either RED or Green) the charger is bad, or the M2500 Battery is gone. I opened mine up and will (!) replace it eventually, but it is consisted of 2 tiny batteries, about 1/4 as long and same diameter as a AAA connected together. They measure 1.3v each, but I think this is SUPPOSED to measure 2.4v/4.8v total(?). To Open, you have to use force and pry it apart starting at the charger socket end. Go slow and it wont break.

Posted on Jun 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ATT BB Bold 9000 pairs with plantronics bluetooth headset fine but always drops connection when call is made


Make sure there are no other bluetooth devices interfering with the connectivity between headset and phone. Remove the Plantronics headset from the phone menu, if it's showing up. If possible, remove and re-attach the battery of the phone. Power off the headset. Pair the headset to the phone again and you should be okay.

Good luck from Headsets Direct!

Aug 11, 2011 | RIM BlackBerry Bold 9000 Smartphone

Tip

How to pair a Plantronics Explorer 245 Bluetooth headset and a Samsung Intensity...


To pair a Samsung Intensity cell phone with a Plantronics Explorer 245 headset, follow the 10 steps below:

1. Turn your cell phone on and your headset off.

2. On the Intensity, press the Menu button (the center round button) and from the main menu, go to Settings & Tools (in the bottom right corner).

3. Select item #3, Bluetooth Menu.

4. Select item #1, Add New Device.

5. If your Bluetooth radio is currently off, you'll be asked if you want to turn it on -- select Yes.

6. Turn on the Explorer headset. After a few seconds you should see either red and blue flashes or just blue flashes. If you see red and blue flashes, go on to step 7. If you see only blue flashes, hold the Call button down (the button on the side of the earpiece) for five or six seconds, until the LEDs begin to flash red and then blue.

7. On your cell phone, click OK on the screen telling you to place your device in discoverable mode.

8. The phone will search for Bluetooth devices in the area, and the Plantronics headset will appear at the top of the screen. It should be labeled "245Plantronics" or something similar. Once you see the headset appear on the screen, press the menu button to stop the search.

9. Press the menu button again to pair the two devices.

10. A message will appear once pairing has been completed, and you will be prompted to connect the phone to the headset. Select Yes.

The connection has now been established between the two devices, and you can use your Explorer 245 as a hands-free headset in conjunction with your cell phone. To see information about the headset (such as what services it offers, what its Bluetooth address is, or how long it has been paired to your phone) scroll down to its name on the phone's Bluetooth Menu and click the right option button to bring up the device's Options screen.

on Oct 26, 2010 | Samsung SCH-U450 Cell Phone

1 Answer

How to install a bluetooth headset to this phone


Hi,

To connect a bluetooth headset follow the below steps.

1.Switch on the bluetooth headset

2.Set your Bluetooth phone to discover the headset.
‘Settings,’ > ‘Connection’, or ‘Bluetooth’ menu on your phone and then selecting the option to discover Bluetooth devices.

3.Your phone will find the headset and ask if you want to pair with it. Confirm this by pressing the Yes or OK key.


Thank You

Aug 14, 2010 | Samsung SGH-D900 Cellular Phone

1 Answer

Unable to pair LG GM200 bluetooth 2.0 A2DP with Plantronics Pulsar 260. Error: "Request Failed" Please help in connecting this two devices


Each pair of BT enabled phone and headset is a particular world. I don't have the Plantronics, but my LG phone pairs fine with my Lubix stereo headsets. I'll tell you how I managed to pair them: I put my headsets in pairing mode. Then, on my phone, I go to 'Connectivity > Bluetooth > Device list > Options > New'. If my bluetooth stack is off I'm prompted to turn it on. It starts to search for devices, and comes up with my BT headsets' name, I press 'Pair', it prompts me for the pairing code. I enter '0000' (the same code for your Plantronics' headsets, by the way) and Ok. Then, back to the Device list, I select the BT headsets and go to 'Options > Connect'. I'm good to go. After listening to music, I use to go again to 'Connectivity > Bluetooth > Device list', select the headsets and press 'Options > Disconnect'.
Hope it works for you.
Cheers! Carlos

Apr 18, 2010 | LG GM200 Cell Phone

1 Answer

CAN'T GET MY BLACKBERRY 8330 TO PAIR WITH MY


Did you do the steps listed here?
This is the Plantronics information.
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The rst time you turn your headset on, your
headset automatically enters pairing mode for 10 minutes. Once paired
successfully, your headset stays on for instant use.
If not sucessfully paired after 10 minutes, your headset automatically
powers o. When you turn the headset on again, it automatically goes
into pairing mode until successfully paired with a Bluetooth phone.
To pair your headset for the rst time:
Turn ON the Bluetooth feature on your phone.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth > On.
See your phone’s user guide for more information.
Press and hold the call control button to turn on your headset. (The indicator
ashes red/blue to show that the headset is on and in pairing mode.)
TIP: If you don’t see the red/blue ash, press and hold the call control button to
turn your headset o, and then press and hold the call control button again until
you see the red/blue ash.
Use the commands on your phone to locate your headset.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 520Plantronics. See your phone’s user guide for more information.
When prompted for the passkey, enter 0000.
When pairing is successful, the indicator on your headset ashes blue. Your
headset is now connected and ready to use.

Apr 15, 2010 | RIM BlackBerry? Curve 8330 Cellular Phone

1 Answer

Plantronics explorer 220 bluetooth


I have a Samsung t 509, and a Plantronics 220. When set it up it connected fine. It wil not connect anymore. Need a lil help

Mar 19, 2008 | Motorola Mobility MOTOKRZR K1 Cellular...

1 Answer

Bluetooth not working anymore


CYBERSOUL - take the phone to a mobile center and ahve them correct it for you.

Mar 02, 2008 | Samsung SGH-D900 Cellular Phone

1 Answer

I have a m2500 plantronics bluetooth heasdset and it will not connect to my new palm centro


All you have to do is connect and pair the two together, the bluetooth will flash a purple light when it is connected to your phone. make sure your bluetooth is charged if you use it, a flat battery will also make it not connecting to your phone.

Feb 29, 2008 | Cell Phones

1 Answer

Bluetooth from Samsung D900 (HELP PLEASE!)


nback - DO AHARD RESET *2767*3855#

KEWL - BUT YOUR BT TO SEARCH SWTCH THE JABRA ON THEN PAIR THE P/W 0000

Sep 27, 2007 | Samsung SGH-D900 Cellular Phone

2 Answers

How do i connect a plantronics m2500 to a nokia 6233


Did you set your headset to pairing-mode before you searched for it ? Must headsets dont broadcast their prescence by default.

Aug 29, 2007 | Nokia 6233 Cellular Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...