It worked fine until about a week ago and then suddenly stopped mid-print and hasn't started again. When you give the print command it says "printing page 1, 85% complete" and then nothing happens. When you look under the 'completed' categorie, it says the job is finished, but nothing has happened.
The red status light is red and the red and yellow (2nd and 3d) coloured toner lights are red.
I tried changing the waste toner cartridge with no success.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: not printing, making me crazy
A paper jam has occurred. To solve the problem, see “Clearing Paper Jams” on page 6.3. • The front or top cover is opened. Close the front or top cover. • There is no paper in the tray. Load paper in the tray. • The waste toner container is not installed or full. Check the container. • Your system has some problems. If this problem occurs, contact your service representative.
Also i can indicate that the Toner Cartridges are empty and need replaced with Genuine Samsung Cartridges
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Pl. check the error on smart panel, which is available at program window(Click on START .> ALL PROGRAM > SAMSUNG CLP 300 SERIES > SMART PANEL.) give print comand, it will pop up the erro detail.
Thanks and Happy new year.
Try reinstalling the printer, as it sounds like a driver problem. This shouldn't happen, but occasionally the drivers get corrupted. And refilled cartridges certainly don't help, and may continue to give trouble even when replaced with OEM ones. Have you tried turning the printer completely off - disconnecting the power lead, for a few minutes? That sometimes clears things.
how do you connect to the printer? USB/parallel/Network?
Does it prints fine if you print an information page from the printer display/butons?
I would try to uninstall the printer driver and install it again to start. It's definately a communication problem so it may take a few tries to get it to work again.
the printer gears assembly is brokem or gor cracked so it is giving this message that ---cannot complrte print task---
just get that assembly replaced to make it proper.
it will cost u near $20 for the assembly.
hey wildd, Try unplugging the printer from the electrical source for "several" minutes. Shutdown the computer too. Turn on the printer, then turn on the computer. If that doesn't work go the whole mile. Uninstall all printers and software. download the latest drivers from Epson.
This link is to the epson site and your machine. Download the drivers from here.
Have you had any paper jams lately? Make sure there aren't any pieces of paper stuck or any other debris. How about the print properties, or open print jobs? what does it show when the job stops.
Let me know what happens.