Question about Broan-NuTone Dryers

This should not be a problem. If you think you need a more powerful fan a there is a 110 CFM replacement fan that will fit in the same housing. The NuTone part# is 0696B000. There are some generic versions out there on ebay and amazon that have been causing people a lot of trouble. I would recommend buying from an Authorized NuTone dealer only.

http://bit.ly/8WYtJd

Posted on Nov 19, 2010

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

You can't convert cubic feet to square feet because cubic feet has an extra dimension, you could fit an unlimited number of square feet into cubic feet.

The formula for Cubic feet is:

length × width × height

The formula for Square feet is:

length × width

The formula for Cubic feet is:

length × width × height

The formula for Square feet is:

length × width

Aug 19, 2016 | Office Equipment & Supplies

cubic feet is Length x width x height. so the 2.2 cubic foot would still have Length x width and therefore you would have 4,84 square feet.

Jan 08, 2016 | Panasonic Microwave Ovens

Hi Paula:

A mathematical logic question.

You need to get all of the measurements in the same units.

- A cubic yard is 1 yard x 1 yard x 1 yard

- equals 3 ft x 3 ft x 3 ft

- equals 27 cubic feet,

so once you have the volume of the pipe in cubic feet, you divide by 27 to get the volume in cubic yards.

- Volume of a cylinder (the pipe) is the cross sectional area X length.

- Area equals Pi x r squared.

- equals 22/7 x 1 x 1

equals 3.14#####

times length (20)

equals 62.857### cubic feet volume

divide by 27 cubic feet

equals 2.328### cubic yards.

- The answer is always the easy part.

- what is important is knowing exactly what the question is, and

- determing what calculations are needed to get the answer.

Wasn't that better than if I'd just said 2 1/3 cubic yards?

Cheers

A mathematical logic question.

You need to get all of the measurements in the same units.

- A cubic yard is 1 yard x 1 yard x 1 yard

- equals 3 ft x 3 ft x 3 ft

- equals 27 cubic feet,

so once you have the volume of the pipe in cubic feet, you divide by 27 to get the volume in cubic yards.

- Volume of a cylinder (the pipe) is the cross sectional area X length.

- Area equals Pi x r squared.

- equals 22/7 x 1 x 1

equals 3.14#####

times length (20)

equals 62.857### cubic feet volume

divide by 27 cubic feet

equals 2.328### cubic yards.

- The answer is always the easy part.

- what is important is knowing exactly what the question is, and

- determing what calculations are needed to get the answer.

Wasn't that better than if I'd just said 2 1/3 cubic yards?

Cheers

Jan 05, 2016 | Office Equipment & Supplies

2.33 Cubic Yards

Jan 05, 2016 | Office Equipment & Supplies

Not enough information to answer. For AREA, you multiply length times width and get square feet. For VOLUME you multiply length times width times height and get cubic feet. You need a third value to calculate cubic feet.

Jun 25, 2015 | Office Equipment & Supplies

There is no relation between square anything to cubic anything.

If you want to calculate how many cubic feet 312 sq tiles are, you need to tell how this the tiles are.

Cubic is length x width x hight.

square is length x width.

All in the same dimension so even 1/4 of an inch, should be added in feet. with 0,00xx I don't want to calculate in these old measures anymore.

If you want to calculate how many cubic feet 312 sq tiles are, you need to tell how this the tiles are.

Cubic is length x width x hight.

square is length x width.

All in the same dimension so even 1/4 of an inch, should be added in feet. with 0,00xx I don't want to calculate in these old measures anymore.

Mar 18, 2015 | Measuring Tools & Sensors

Calculating the cubic feet of a space requires multiplying the area of the bottom times the average height. You get the bottom area by multiplying the length times the width. Remember, to get cubic feet, you need all your measurements in feet to start with.

Here is your formula:

VOLUME (in cubic feet) = Length (in feet) X Width (in feet) X Height (in feet)

If it's a rectangular room you're working with, it is all straightforward. If there are irregular walls, it may be necessary to divide up the room into rectangular sections and then add together their individual volumes. If the ceiling is sloped, you need to use the height that has the same ceiling area above it as below it. Good luck! Truly.

Here is your formula:

VOLUME (in cubic feet) = Length (in feet) X Width (in feet) X Height (in feet)

If it's a rectangular room you're working with, it is all straightforward. If there are irregular walls, it may be necessary to divide up the room into rectangular sections and then add together their individual volumes. If the ceiling is sloped, you need to use the height that has the same ceiling area above it as below it. Good luck! Truly.

Jul 25, 2014 | Building Materials

Cubic square feet is determined by multiplying length (depth) X width

X height. Example= 2X2X2 = 8 cubic feet. A typical countertop microwave is going to be 1.1 to 1.6 cubic feet of oven capacity.

X height. Example= 2X2X2 = 8 cubic feet. A typical countertop microwave is going to be 1.1 to 1.6 cubic feet of oven capacity.

Feb 15, 2014 | Hotpoint RVM1435 Microwave Oven

That is something that cannot be done (cubic to square). You can convert cubic meters to cubic feet or square meters to square feet as follows:

Multiply cubic meters by 35.3146 to get cubic feet

Multiply square meters by 10.7639 to get square feet

Multiply cubic meters by 35.3146 to get cubic feet

Multiply square meters by 10.7639 to get square feet

Apr 01, 2011 | Office Equipment & Supplies

the fan is pulling too many cfm (cubic feet per minute).you can replace the switch of the fan with a potentiometer type switch (this works like a light dimmer)you can reduce the speed of the fan,or you can use a couple of synthetic fiber filters to trap the condensation.good luck

Jan 04, 2008 | Fantech Fans Exhaust Fan In-Line

Jun 24, 2017 | Broan-NuTone Dryers

Dec 06, 2015 | Broan-NuTone Dryers

Dec 17, 2013 | Broan-NuTone Dryers

359 people viewed this question

Usually answered in minutes!

×