Question about Creative Labs ZEN Vision:M Digital Media Player

1 Answer

Firmware prblems Whenever reset my zvm, it says rebuilding... After this it come up with firmware problem.. No matter when i connect it to my laptop it will not register my zvm for the fireware update.. :S Help!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

Go to Creative's website and get the firmware Update.

If no:
I stumbled on a knowledge base on the Creative web-site after I had registered the player; maybe this was not available to me previously.
This player has a Reset button sunk into the base. It needs a prod with the end of a paper clip during the boot up. The resultant Recovery menu gives the option to Format the disc which I've done and successfully loaded my music back again. It is now playing very nicely and hopefully will continue to do so.

I hope this info will help others with the same problem. I t appears that the music files can become corrupted very easily.

Posted on Jun 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Zen M 30g keeps rebuilding....tried to reset but it won't work...I put the pin in the reset hole and it won't do anything til I pull the pin out then it comes on but is rebuilding???? Help please!!!


Hello.
Welcome to Fixya's Community.

Your Mp3 Player is Having Problem with the Firmware(Corrupted) Now you need to Upgrade it Firmware, in order to solve this problem Please follow these Steps:

  • To install this firmware
    1. Download the file into your local hard disk.( check out the link below)
    2. Close all application windows that are currently running on your computer.
    3. Connect your player to your computer.
    4. Double-click the downloaded file and follow the instructions on the screen.
  • When your player restarts after installing this firmware, the following will occur for the first time only:
    • The Rebuilding Library screen will appear.
    • Photos may take slightly longer than normal to appear.
  • This firmware supports the playback of Audible Type 2 and 4 tracks.
  • Important: to transfer Audible content, you must have AudibleManager version 5 or later installed. AudibleManager allows you to download, burn, organize, transfer and listen to Audible audio content.
Downloads:
The Firmware updater.
AudibleManager

Additional Help:
Creative Zen M 30Gb Manual Guide.

Thank you for Using Fixya.
Please let me Know if you need any further Info.
Good Luck.

Nov 09, 2009 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

I have a mp4 player of transcend which is T.sonic 850 V1.0 its not even six months since i bought it but its not turning on whenever i turn it on it shows only Transcend


1.download the firmware from here 2.press and hold reset button for 2 seconds 3.run the firmware updater 4.press and hold "volume -" button while connecting to system. 5.the updater will detect the player and it will upgrade the firmware.

Jun 14, 2009 | Transcend T SONIC 630 MP3 Player

2 Answers

File system error in (TRANSCEND mp3 T.sonic 630/1GB)


1.download the appropriate firmware from here 2.press and hold reset button for 2 seconds 3.run the firmware updater 4.press and hold "volume -" button while connecting to system. 5.the updater will detect the player and it will upgrade the firmware.

Mar 18, 2009 | Transcend T SONIC 630 MP3 Player

1 Answer

My creative zen vision M says FIRMWARE PROBLEM! HELP!


Hi you can try going to Creative's web site and downloading there Creative MP3 Player Recovery Tool software and what that does is update everything and most of the time it will fix what the problem . I would try that first.

I hope this helps

Mar 08, 2009 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

ZVM won't charge


Usually this problem is due to the firmware. If you upgrade the firmware to version 1.62.02, this problem usually will disappear. The older firmwares have problems in recognizing the battery and allowing the battery to power the unit.

Here is what you'll need to do to save your Zen: you will need a charger for the operation. I recommend buying a brand new charger from the Creative Labs website or a used one here, instead of getting an aftermarket one off Ebay. Aftermarket ones tend to cause problems or fail to work altogether.

Plug in the wall charger and USB cable at the same time. Your Zen should power on when connected the charger. Once it is powered on, connect the USB cable to your computer.

If your Zen does not power on when connected to the charger, your unit is dead and its time to replace it or get the motherboard replaced via one of the Repair services offered on this website.
Download the firmware to your PC, then reboot your PC and connect the Zen via USB cable. Open the firmware icon to begin the download.

95de636.jpg

If the upgrade button on the firmware window is not available, it is also time to replace your motherboard due to corruption of a chip on the board.

Oct 02, 2008 | Creative Labs ZEN Vision:M Digital Media...

3 Answers

Firmware problem for zen vision M


I had the same issue with my zen vision m. It was not recognized on any computer (although it would charge) and I noticed that when I turned it on after having it off for any amount of time, the zen would rebuild half way before turning on. 
If this is what is happening with you, then this one solution I found to fix it: 
Download the MP3 Recovery Tool from Creative Support website. Make sure that your Zen is charged at least half.   Turn on your Zen, Holding the power switch in the on position (Very Important!). While holding the Power switch on, Reset the Zen by inserting a small object in the Reset hole on the bottom of the Zen (small objects can include thumbtack, wire, earring, etc...). You will see a menu: Clean Up, Format, Reload OS/Firmware, Reboot. (It is now safe to stop holding the Power switch) I decided to go down the list until something worked.  I ran Clean Up first and that didn't work for me, so I tried Format.  It will remove all of your data. Once Format runs, Reboot the MP3 player and plug it up to the computer. Run MP3 Recovery Tool. The firmware should should install itself on your MP3. Once installed, your computer should recognize the Zen. 
I hope this helps! 

Jun 24, 2008 | Creative Labs ZEN Vision:M Digital Media...

1 Answer

Creative zen 30g will not turn on. when you try it goes to rebuilding then freezes and the says firmware problem. you cant do anything after that. i trie the reset button, same thing. tried charging and...


www.creative.com has firmware that can be downloaded to the PC then installed to the Zen VIA USB. The drive inside the player may need replacing though, it is just a standard IDE laptop drive.
I would try the firmware first then try replacing the drive if you have access to a spare one.

Jun 09, 2008 | MP3 & Digital Media Players

2 Answers

Firmware Problem + Can't upload new Firmware


http://www.anythingbutipod.com/forum/showthread.php?t=10960

go here

Feb 20, 2008 | Creative Labs ZEN Vision:M Digital Media...

14 Answers

Zen vision m firmware problem


Dear All this problem is caused if the computer has windows media player 11 installed. I googled this for days trying to fix it - & was relieved when i finally sorted it - it's very easy. Just do the following.
Use a computer that has XP (either pro or home edition) (forget about vista....). go to add/remove programs - uninstall windows medi player - on my PC it does a roll back to WMP version 9. There's also a program called "Windows media format runtime 11" which comes with WMP11 & you need to uninstall this too - otherwise it still won't recognise the player.

Then restart your PC. Then make sure you have downloaded the lastest firmware version - just google it - trying to find the right one on the creative website is not easy - their website is poor - there are quite a few other places you can download it from.

Then I clicked the "reload firmware" option in the recovery mode (I had already deleted it 4 days ago). Then when your PC has restarted plug in your Zen, it should come up something like "MTP device recognised". Now when you double click on the firmware downloaded to install - it it will recognise the player & you can click the upgrade button. It does the upgrade & puts the firmware back on the ZEN. I got a message saying "firmware upgrade failed" at the end although when I started the player - it booted up as normal & I was able to reload & play my music.

This sure beats the "send it back to John Lewis, pay 60 quid & wait 6 weeks for it to come back " option - if like mine it's out of warranty

Feb 17, 2008 | Creative Labs ZEN Vision:M Digital Media...

Not finding what you are looking for?
Creative Labs ZEN Vision:M Digital Media Player Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs MP3 & Digital Media Players Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you a Creative Labs MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...