Question about Kodak EasyShare One Digital Camera

1 Answer

When I try to transfer pictures to any computer the camera just repeatedly blinks its green light on and off, the screen stays blank, and nothing happens. How can I fix this?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Kodak Master
  • 102,366 Answers

Try NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.

Posted on May 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I mistakely deleted pictures from my camera (Kodax Esay Share M340) Move picture to internal memory.How can i get the pictures back


If Try one or more of the following

Ready light does not turn on and the camera does not work.

Ready light blinks green.

  • Camera is operating normally.

Ready light blinks amber.

  • Wait. Resume picture taking when the light stops blinking and turns green.

Ready light blinks red and camera turns off.

Ready light glows steady red.

Ready light is off or glows steady green.

  • Camera is operating normally

Mar 10, 2011 | Kodak Cameras

1 Answer

I recently fixed the blinking green light problem following advice here. Now, about a week later, when I turn on the tv, I get image for a few seconds and then the screen goes blank/dark. Green light...


i have the same problem. i just replace the power board because of the "green blinking" light. now, light stays green, picture comes on for a few seconds, then blank....

did you fix your problem.

Aug 31, 2010 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

2 Answers

Should the power light be green or red, when I turn camera on it shows a green light then turns red


Red light indicates that the camera is out of charged., Try to charged your battery for 3-4 hrs if you encounter flashing red on a fully charged battery you need to call kodak 1 800 235 6325 ext 12

You can charged you camera using 5V AC Adaptor or a USB cable taht attached into the computer

Nov 16, 2009 | Kodak EASYSHARE M1063 Digital Camera

2 Answers

Picture & sound go on & off every sec, red light blinks 5 times


helloFive blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

shaun

Oct 25, 2009 | Sony Grand WEGA KDF-55XS955 55" Rear...

1 Answer

HP L1706- screen is blank when I switch on


First if you have a extra monitor try to plug it in and see if it works. If not then check your video card. or get into the computer and try and remove and reseat the memory. Sometimes by just doing that can solve the problems

Feb 06, 2009 | HP L1706 17" LCD Monitor

1 Answer

Blinking green light, lens not coming out, not able to take pics


I had the same issue with both my D550 and D560 that I just picked up. If you are using normal AA batteries, change to Lithium. Now both my camera's are working. I used to be able to use AA's but for some reason, the ones I have picked up recently were not strong enough. Worth a try at only about $10 for a 4 pack at your local Walgreens or CVS.

Dec 19, 2008 | Olympus Camedia C-350 Digital Camera

1 Answer

Connecting problem


The easiest way to transfer images is to put the media card into a card reader attached to your computer.

Apr 29, 2017 | Samsung Digimax D53 Digital Camera

1 Answer

Screen goes blank when I plug camera into computer


I have to say Mac's I know nothing about. But the simple way would be to purchase a universal USB card reader- and use that.

Jul 04, 2007 | Canon PowerShot A520 Digital Camera

Not finding what you are looking for?
Kodak EasyShare One Digital Camera Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...