Question about Konica Minolta bizhub 350 All-In-One Laser Printer

2 Answers

How do I do a full page print for like flyers for business without the white margins, I have the bleed set up on the design side, I have tried using Illustrator PS, and Reader and I always get the margins, I have tried telling the printer the letter paper is A4 and printing it then the top to bottom comes out fine, but the sides are all off whack. and the pictures does not come out centered properly.

Posted by on

  • chrissmoot Nov 13, 2010

    This is an commercial printer a Bizhub C350 it should be able to

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Konica Minolta Master
  • 12,061 Answers

Hi, Hmmmm, well most laser printer simply cannot print right out to the edge due to the geometry of how they are setup and how the laser printer Fuser bar physically functions, it simply cannot get hot enough right out at the very edges to effectively fuse the toner onto the paper, so they simply don't/can't.they usually must always have this edge around them, due to this.
Some commercial inkjets and some special printers can..
The best you can do, is print out as far as margins allow, about 1/8"? and use a guillotine to cut off the excess.?

Posted on Nov 11, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 2,973 Answers

Chris,
Instead of using standard size page settings use the Custom page setting and set the page width and length more than the A4 size. How much more depends on the total of the left and right margins and the length by total of top and bottom margins.
Alternatively, reduce the margins to 0 in the page settings of your word processor.

Posted on Nov 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printing without the white side lines


I think the problem is not with your printer but with page set up. Try going into settings for your printer and reduce the margins.

Jan 03, 2014 | Xerox Phaser 6128MFP AllInOne Laser...

3 Answers

My Business Cards


You need to set the print size to match the size of the card.

you either need to resize the document or change your print preferences to match the size of the card.

May 16, 2008 | Avanquest MyBusinessCards (824592)

2 Answers

How do I eliminate the margin so it prints out to the edge? I have done a search for a full bleed. No reference.


Unfortunately, Xerox solid ink printers don't print full bleed. It is a shame because in theory, the machine is capable of it but it would require a firmware/driver programming/design update which Xerox are unlikely to do.

Jan 19, 2011 | Xerox Phaser 8860MFP Printer

2 Answers

I want to print a brochure in word or psd and how I can print edge to edge, borderless.


Within MS Word, minimize the "left-margin" and "right-margin" settings/

Use "printer setup" to minimize the margins.

Oct 31, 2009 | Microsoft Office Word 2007 Full Version...

3 Answers

Printing Phaser 8550


that is a part of that printer design. Something sadly you can not get rid of. Believe me, I have tried, and Xerox engineering told me that is part of how the machine is supposed to work. Wish we could eliminate that.

Mar 26, 2009 | Xerox Phaser 8500/DN Printer

1 Answer

I can't print full bleed from CS3 to a Phaser 7750DN


You didn't mention paper size, so my apologies if you are using a sheet that will accommodate bleeds and just didn't mention it. This is the simple answer. 
If you printing on 8.5 x 11 paper, you can't get a full bleed. You'll need to print on a larger paper size, like tabloid, and trim your 8.5 x 11 size out of that. There are no printers, even commercial offset printers, that can bleed an 8.5 x 11 design on an 8.5 x 11 sheet. There must be trim in order to get the bleed. it 'bleeds' off the edges of the design.

Nov 11, 2008 | Xerox Phaser 7750DN Laser Printer

1 Answer

I need to print a programme on microsoft publisher without the white border around the outside so basically full page but it wont do it any ideas


Maybe it is a printer limitation. Some printers just will not print full pages, even if you set the margins to 0mm on all sides. Try other printers.

Oct 12, 2008 | Computers & Internet

1 Answer

I want to change my printer settings to print on the full page, not have these 5mm margins all the way round. can someone help? I have a Kyocera FSC5015N


It sounds like you want to print what is called "full bleed" which means that you print from one edge of the paper to the other edge with no margin. Unfortunately your printer can't do this. It is a limitation of the design of the printer that is common to most laser printers. You have two options, either print with the 5mm margin all the way around and trim the paper or get a printer that has a "full bleed" option.

Henry

Apr 22, 2008 | Office Equipment & Supplies

1 Answer

Margins want gone


full bleed, eh? that will be in the print settings issue..make the margins 'nil' and you might get lucky. that's usually a custom print job, by the way.




Feb 06, 2008 | Dell 3110cn Laser Printer

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...